Arlo VMS4430 User guide

November 2018

202-11683-06

Arlo Technologies, Inc.

2200 Faraday Ave. Suite 150

Carlsbad, CA 92008 USA

Arlo Pro

HD Security Camera System

User Manual

2

Support

For product updates and web support, visit http://www.arlo.com/en-us/support/.

Trademarks

for reference purposes only.

Compliance

For regulatory compliance information including the EU Declaration of Conformity, visit www.arlo.com/about/regulatory/.

See the regulatory compliance document before connecting the power supply.

3

Contents

1. Set Up Your System 7

Insert the Battery Into Your Camera ..............................................................................................................7

Get the Arlo App .................................................................................................................................................................................... 8

Connect Your Base Station to the Internet ....................................................................................... 8

Arlo Pro Base Station LEDs ................................................................................................................................................9

Arlo Pro Camera LED ..................................................................................................................................................................10

Add an Arlo Pro Camera to an Existing Arlo Account ..................................................... 12

Sync Your Cameras With the Base Station ....................................................................................... 12

Arlo Pro Firmware Updates ...........................................................................................................................................13

Place or Mount Your Cameras .................................................................................................................................. 13

Choose a Good Spot for Your Arlo Pro Camera .........................................................................14

Position Your Camera to Optimize Its Field of View .......................................................... 15

Position Mode .........................................................................................................................................................................................16

Recharge Your Arlo Pro Battery ........................................................................................................................... 17

Add a Camera From Another Arlo Account .......................................................................................18

2. View Your Content 19

View the Devices Page ...........................................................................................................................................................19

View Camera Feeds ...................................................................................................................................................................... 20

Pan and Zoom Video ....................................................................................................................................................................20

Record Clips From Live Video .....................................................................................................................................21

Take a Snapshot From Live Video .......................................................................................................................21

Talk and Listen ......................................................................................................................................................................................22

Control the Camera Feed Image ..........................................................................................................................22

Cloud Recording ................................................................................................................................................................................. 24

View Recordings and Snapshots .......................................................................................................................... 25

Share and Manage Library Recordings ....................................................................................................27

4

3. USB Device Storage With Arlo Pro 30

Connect a USB Storage Device .............................................................................................................................. 30

View the USB Storage Device Status ..........................................................................................................31

Safely Eject and Remove a USB Storage Device ....................................................................31

View Video Clips on a USB Storage Device ........................................................................................33

Change the USB Storage Device Overwrite Setting .......................................................33

Format a USB Storage Device ..................................................................................................................................34

Turn on Recording for a USB Storage Device ..............................................................................35

Stop Recording Onto a USB Storage Device ..................................................................................36

4. Personalize Your System 37

Name Your Camera .......................................................................................................................................................................37

Proﬁle Settings ..................................................................................................................................................................................... 37

Grant Access to Friends ......................................................................................................................................................39

5. Modes, Rules, and Smart Alerts 42

Modes ....................................................................................................................................................................................................................42

Rules ........................................................................................................................................................................................................................ 43

Select a Mode ......................................................................................................................................................................................... 43

Change Motion Sensitivity ...............................................................................................................................................45

Automatically Stop Recording When Motion Stops ........................................................... 46

Change Audio Sensitivity .................................................................................................................................................... 46

Add a Rule That Includes a Siren Trigger ..............................................................................................47

Manage Alerts ........................................................................................................................................................................................ 48

Set Up Geofencing .........................................................................................................................................................................49

Geofencing With Multipe Mobile Devices .............................................................................................50

Geofencing Accuracy ...............................................................................................................................................................51

Geofencing First In, Last Out ...................................................................................................................................... 52

Schedule Your Camera Rules ......................................................................................................................................52

Add a Mode ..................................................................................................................................................................................................55

Add a Mode With Dierent Rules for Each Camera ..........................................................56

5

6. Settings 59

Turn the Arlo App Fingerprint ID Login On and O ............................................................. 59

Change the Time Zone ............................................................................................................................................................ 59

Camera Settings ................................................................................................................................................................................60

Audio Settings ........................................................................................................................................................................................ 62

Base Station Settings .............................................................................................................................................................. 64

View Device Information ..................................................................................................................................................... 68

Restart the Camera.....................................................................................................................................................................68

Remove a Camera From Your Account ...................................................................................................... 69

7. Manage Your Subscription Plan 70

Subscription Plans .........................................................................................................................................................................70

Upgrade to a Paid Subscription Plan ............................................................................................................70

8. Arlo Connect 71

Use Arlo With IFTTT ......................................................................................................................................................................71

Use Arlo Cameras With SmartThings ............................................................................................................71

Use Arlo With Stringify ...........................................................................................................................................................71

9. Use SmartThings With Arlo Cameras 73

Prepare Arlo to Work With SmartThings ................................................................................................73

Integrate Your Arlo Cameras With the SmartThings App .......................................74

Adjust the Motion Sensitivity Level ................................................................................................................75

Adjust Push Notiﬁcations .................................................................................................................................................. 76

10. FAQs and Troubleshooting 77

Battery FAQs ............................................................................................................................................................................................ 77

Manage Bandwidth for Streaming ...................................................................................................................78

Can’t See Video Streams in a Browser ......................................................................................................79

Not Receiving Push Notiﬁcations .......................................................................................................................80

Verify That the Arlo Base Station Is Online ......................................................................................82

Base Station Is Oine ............................................................................................................................................................. 82

6

Signal Strength .................................................................................................................................................................................... 84

Reset the Arlo Base Station to Factory Settings .................................................................85

11. Rechargeable Battery Safety 86

Safety Rules for Arlo Pro Rechargeable Batteries ............................................................86

Safety Rules for Arlo Pro Charging Station .....................................................................................87

7

1. Set Up Your System

Setting up your Arlo Pro system involves these steps:

• Insert the battery into your camera.

• Get the Arlo app.

• Connect your base station.

• Get an account.

• Sync your cameras to the base station.

• Place your cameras.

Insert the Battery Into Your Camera

¾ To insert the battery into your camera:

1. Unlock the battery compartment by pressing and holding the latch.

2. Gently pull the battery door back to open the compartment.

3. Align the battery contacts.

4. Insert the battery.

5. Close the battery door.

Note: The Arlo Pro battery is partially charged when it leaves the factory.

For more information, see Safety Rules for Arlo Pro Rechargeable Batteries on

page 83.

8

Set Up Your System

Get the Arlo App

For the best experience, download the Arlo app for your smartphone by scanning

this QR code or searching for Arlo in the app store.

Note: If you already use the Arlo app, make sure that you are using the latest version. To

ﬁnd out if an update is available, go to the app store and search for Arlo.

Connect Your Base Station to the Internet

The base station connects to your home network and allows you to view your

camera streams from anywhere.

¾ To connect your base station to the Internet:

1. Connect the base station to your

router using an Ethernet cable.

2. Connect the AC adapter to the base

station and plug it in.

https://my.arlo.com/#/login

9

Set Up Your System

3. Turn the base station on by pressing the On/O button.

The Power LED and Internet LED on the front of the base station light green in

about two minutes.

Your base station is set up.

Arlo Pro Base Station LEDs

See the following list for explanations for green, amber, and blinking LEDs:

Green

The base station

is powered on.

Blinking green

A ﬁrmware update

is in progress. DO

NOT TURN OFF THE

BASE STATION OR

CAMERAS.

O

The base station

is powered o.

Green

The base station

is connected to

the Internet.

Amber

The base station is

connected to the

router but did not

get an Internet

connection.

O

The base station is

not connected to

your router.

Green

Cameras are

connected to the

base station.

Blinking green

The base station

is attempting

to sync with a

camera.

Blinking amber

A camera is too

far from the base

station. Signal

strength is weak.

O

No cameras are

detected.

Amber

The base station

is booting.

Power Internet Camera

Blinking green

The base station

is sending or

receiving data

over the Internet.

10

Set Up Your System

Arlo Pro Camera LED

The LED on the camera lights when the camera is powered on. The LED changes

color and blinks depending on the battery charge and to indicate the status of

activities such as syncing the camera and updating the camera ﬁrmware.

See the following table for explanations for the Camera LED.

Camera

LED

Color and Action Meaning

Solid blue The camera is connected to the Quick Charge 9v power

adapter and is fully charged.

Fast blinking blue for 3

seconds

The camera is connected to the Quick Charge 9v power

adapter and is charging.

Fast blinking blue for 10

seconds

The camera synced to the base station.

Solid amber The camera is booting.

Blinking amber once per

minute

Low battery (15% or less)

Fast blinking amber for 3

seconds

The camera is not charging. It is connected to a 5v charger

instead of the Quick Charge 9v power adapter that came in

the package with the camera.

Fast blinking amber for 10

seconds

The camera failed to sync to the base station.

Blinking blue and amber A ﬁrmware update is in progress. DO NOT TURN OFF THE

CAMERA.

11

Set Up Your System

Get an Account

¾ To set up an Arlo account:

1. Tap the Arlo icon on your mobile device.

If you are using a computer, enter https://my.arlo.com/#/login in the address bar

of a browser.

If you are using a mobile device that supports Touch ID

®

, you are prompted to

enable Touch ID or skip.

2. To use Touch ID, tap Enable Touch ID.

If you tap Skip, you can turn on the Arlo app ﬁngerprint ID login later. See Turn

the Arlo App Fingerprint ID Login On and O on page 55.

3. Tap or click New to Arlo?.

4. Select Arlo (Wire-Free).

5. After the app discovers your device, select your base station’s serial number

from the menu.

6. Select your time zone from the menu.

7. Tap or click Continue.

8. Complete the required ﬁelds for account setup.

9. Tap or click Continue.

10. Select a subscription plan.

Note: For more information, see Subscription Plans on page 66.

Your Arlo account is set up. The Basic subscription plan supports up to ﬁve synced

cameras. You can upgrade to a paid subscription plan to support more cameras.

12

Set Up Your System

Add an Arlo Pro Camera to an Existing Arlo Account

¾ To add an Arlo Pro camera to an existing Arlo account:

1. Tap the Arlo icon on your mobile device.

If you are using a computer, enter https://my.arlo.com/#/login in the address bar

of a browser.

2. Tap or click Add Device.

3. Follow the onscreen instructions.

Sync Your Cameras With the Base Station

¾ To sync your cameras:

1. Place the camera one to three feet (30 –100 centimeters) of the base station.

Note: Cameras must be synced one at a time.

2. Press the Sync button on the top of the

base station for about two seconds and

then release the button.

3. Wait for the Sync status LED to blink green.

4. Press the Sync button on top of the

camera for about two seconds and then

release the button.

13

Set Up Your System

The LED on the camera LED lights blue and blinks rapidly to conﬁrm syncing.

The camera is ready for viewing.

The LED lights amber and blinks rapidly for 10 seconds if the sync is not

successful. You must repeat the sync process.

5. Repeat for each camera.

Arlo Pro Firmware Updates

During initial setup, when you add the base station to your Arlo account, the Arlo

Pro system checks for ﬁrmware updates. After you sync the ﬁrst Arlo Pro Camera, if

ﬁrmware updates are available, your devices automatically update.

After a base station ﬁrmware update, the base station reboots and connects to

the Internet.

When a camera ﬁrmware update is in progress, the LED on the camera blinks

alternating blue and amber. After this, the LED is o for one to two minutes while

the camera installs the ﬁrmware.

Important: Do not open the battery door while the camera is updating and

installing ﬁrmware. After the camera ﬁrmware update completes, the camera syncs

to the base station again and the camera LED blinks blue rapidly for 10 seconds.

Place or Mount Your Cameras

You can place your camera on a shelf or

other ﬂat surface, or you can mount it to

the wall.

Note: Use the Arlo app in Position mode to

help aim the camera. See Position Mode on

page 16.

14

Set Up Your System

¾ To mount your camera to the wall:

1. Fasten the mounting screw into the

wall, and hang the magnetic mount

from the screw.

2. If you’re mounting the camera to

drywall, be sure to use the plastic

drywall anchors that are provided.

Note: You can also use double-sided tape

instead of screws.

Choose a Good Spot for Your Arlo Pro Camera

Place your Arlo Pro camera in a location with a clear, unblocked ﬁeld of view and

with a good wireless signal to the base station.

It’s important to keep distance in mind when placing your Arlo Pro cameras:

• Maximum. Place your camera a maximum of 300 feet (90 meters) from the base

station. The maximum line-of-sight range of 300 feet is reduced by each wall,

ceiling, or other major obstruction between the camera and base station. The

following materials reduce signal strength the most:

• Unusually thick walls and ceilings

• Brick

• Concrete

• Stone

• Ceramic

• Glass, especially mirrors

• Metal

• Large quantities of water, such as the water in a ﬁsh tank or water heater

Note: Note: Check the Camera LED on the base station. If it’s blinking amber, the base

station detects a low data rate, a sign that a camera is too far from the base station.

• Minimum. Place your Arlo cameras at 10 feet (300 centimeters) away from the

base station, and allow at least 6½ feet (2 meters) between cameras. Follow these

guidelines to prevent WiFi signals between the devices from interfering with each

other.

15

Set Up Your System

Position Your Camera to Optimize Its Field of View

Your Arlo Pro camera has a 115-degree ﬁeld of view. The green areas in the

following illustrations show the camera’s ﬁeld of view. horizontally and vertically

When positioning your Arlo Pro 2 camera, keep these tips in mind:

• Keep active locations in the camera’s ﬁeld of view. Position your camera so

that the space that you want to monitor is within the camera’s ﬁeld of view.

• Do not block the camera’s ﬁeld of view. Make sure that no walls, tables, or

other objects are too close to your camera.

• Aim with the cloud. Use Arlo’s Position mode to send video to the cloud as

quickly as possible. This allows you to aim the camera while watching the video

feed on your Arlo smartphone app to make near real-time adjustments to the

camera’s position. Go to your camera’s Settings to turn on Position mode. After

the camera is in place, you can turn o Position mode, or it automatically turns

o after ﬁve minutes. For more information, see Position Mode on page 16.

• Elevate your camera. Mount your Arlo motion-detection camera at least 7

feet (2 meters) above the ﬂoor and aim it slightly downward for the best sensor

performance.

16

Set Up Your System

• Make sure that side-to-side trac crosses Arlo’s ﬁeld of view. Arlo’s

motion sensor is much more sensitive to side-to-side movement across its ﬁeld

of view than to movement directly toward or away from the camera. The best

area for motion detection is 5 feet to 20 feet (1.5 to 6 meters) from the camera

position.

You can use the Motion Detection Test to verify if motion can be detected in a

camera’s current placement. The camera’s LED ﬂashes amber when motion is

detected. Go to your camera’s Settings to turn on the Motion Detection Test.

Position Mode

Position mode is available only when the camera is not streaming, recording motion,

or in Motion Detection mode.

¾ To place your camera in Position mode:

1. Tap the Arlo icon on your mobile device.

If you are using a computer, enter https://my.arlo.com/#/login in the address bar

of a browser.

If you are using a mobile device that supports Touch ID, you are prompted to

enable Touch ID or skip.

2. Tap or click Settings.

The Settings page displays.

3. Under Camera Settings, select the camera to position.

4. Tap or click Position Mode.

The camera starts streaming video.

17

Set Up Your System

Note: In Position mode, the camera streams video as fast as possible, without buering,

so that you can aim the camera while watching on a smartphone and make near real-time

adjustments to the camera position. This means that you might see lower-quality video

while the camera is in Position mode.

Recharge Your Arlo Pro Battery

The Arlo Pro battery is fully charged when it leaves the factory.

¾ To recharge the battery:

1. Place the camera indoors.

If you are using the camera outside, bring it inside while charging the battery.

2. Connect the power adapter cable to the camera power adapter.

Note: You must use an Arlo Pro power adapter to charge the battery.

3. Connect the other end of the adapter cable to the camera.

4. Plug the power adapter into an electrical outlet.

The camera LED lights solid blue when the camera battery is fully charged.

Note: You can buy spare Arlo Pro rechargeable batteries and charge them in the Arlo

Charging Station (sold separately). For uninterrupted Arlo Pro camera use, we recommend

that you keep a fully charged spare battery on hand.

18

Set Up Your System

Add a Camera From Another Arlo Account

¾ To add a camera from another Arlo account:

1. Tap the Arlo icon on your mobile device.

If you are using a computer, enter https://my.arlo.com/#/login in the address bar

of a browser.

The Devices page displays.

2. Log in to the old Arlo account.

3. Tap or click Settings.

The Settings page displays.

4. Tap or click My Devices.

A list of devices displays.

5. Tap or click the camera.

The settings for the camera display.

6. Scroll down and Tap or click Remove Device.

The camera is removed from your account.

7. Log out of the Arlo app.

8. Sync the camera to the base station.

19

2. View Your Content

Videos recorded by your camera are stored in a library. You can view your recordings

and snapshots, mark them as favorites, and search using the ﬁlter.

View the Devices Page

When you launch the Arlo app, the Devices page displays.

Live Feed

Icon

Tap or click Live to display Camera Icon Display is based on the mode and

camera setup

Pause. Audio detection is on

Record video manually. Motion detection is on

Snapshot. WiFi signal

Brightness. USB device storage

Microphone. Start using Talk and Listen. Battery

Speaker. Mute the audio.

Full screen.

Camera name

Camera feed

Camera icons

Select devices

New recordings

Snapshot and

video library

Detection

modes

Settings

View Your Content

20

View Camera Feeds

You can view your camera feeds at any time.

¾ To view camera feeds:

1. Tap the Arlo icon on your mobile device.

If you are using a computer, enter https://my.arlo.com/#/login in the address bar

of a browser.

The Devices page displays. The icons above each camera feed depend on the

rules in the currently selected mode and how the camera is connected. For

information about these icons, see View the Devices page on page 19.

2. To view and listen to a live feed, tap or click Live on the camera feed image.

A row of live feed icons displays below the live stream image for the camera.

3. To stop viewing and listening to the live feed, tap or click the Pause icon.

Pan and Zoom Video

You can pan and zoom to focus in on the high-def details of any live or recorded

video. Just pinch and drag any image as you do with photos on your smartphone.

¾ To pan and zoom video:

1. Tap the Arlo icon on your mobile device.

If you are using a computer, enter https://my.arlo.com/#/login in the address bar

of a browser.

The Devices page displays.

2. Tap or click Library.

The calendar displays on the top of the page.

3. Tap or click any live video or prerecorded video from your Arlo library.

4. To pan and zoom using a mobile device, do the following:

• To zoom in and out of the video, use the pinch gesture.

• To move around the zoomed-in frame, touch and drag.

5. To pan and zoom using a computer, do the following:

• To zoom in and out, click the Zoom icon.

• To move around in the frame, use your mouse button.

Page is loading ...

Arlo VMS4430 User guide

Arlo VMS4430 User guide

Related papers

Other documents