Toro CE Kit, Model 78551 Blower and Drive Kit for 48in Bagging System Installation guide

Toro
Brand
Toro
Model
CE Kit, Model 78551 Blower and Drive Kit for 48in Bagging System
Type
Installation guide

This manual is also suitable for

FormNo.3368-137RevA
CEKit
forModel78551,78552or78553BlowerandDriveKitfora48in,
52inor60inBaggingSystem
ModelNo.117-3825
ModelNo.117-3826
ModelNo.119-4240
InstallationInstructions
Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.
Note:Thiskitneedstobeinstalledonmodel78551,78552or78553BlowerandDriveKittocreateaCEbagger.
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
1
Nopartsrequired
–
Preparethemower.
Warningdecal1
2
Covermissingdecal
1
Installthedecals.
Blowercover1
Bolt(1/4x3/4inch)
1
Washer(1/4inch)
1
Washer(5/16inch)
1
Plasticplug1
3
Pushnut(1/4inch)
1
Installthecovers.
Leftguard
1
Backguard1
Frontguard1
Lowerguard1
Bolt(5/16x3/4inch)
1
4
Flangenut(5/16inch)
1
Installtheguards.
5
Muferguard
1
Installthemuferguard.
1
PreparingtheMower
NoPartsRequired
Procedure
1.Thoroughlycleanmowerdeck.Alldebrismustbe
removedtoensurethekitwilltproperly.
2.Repairallbentordamagedareasandreplaceany
missingparts.
©2011—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved
2
InstallingtheDecals
Partsneededforthisprocedure:
1Warningdecal
1
Covermissingdecal
Procedure
1.Removetheexistingblowercover(
Figure2).Save
thehardware.
2.Cleantheareawherethedecalswillgo(Figure1).
3.InstallthedecalsasshowninFigure1.
g013161
Figure1
1.Covermissingdecal
2.Warningdecal
3
InstallingtheCovers
Partsneededforthisprocedure:
1Blowercover
1
Bolt(1/4x3/4inch)
1
Washer(1/4inch)
1
Washer(5/16inch)
1Plasticplug
1
Pushnut(1/4inch)
Procedure
1.Removetheexistingbeltcoverretainingknoband
discard.
2.Removetheexistingbeltcover(Figure2orFigure3).
3.Attachthebolt(1/4x3/4inch)andaatwasher
(5/16inch)tothebeltcoverwithaatwasher(1/4
inch)andpushnut(1/4inch)(
Figure2orFigure3).
4.Installthebeltcoverandtightenthebolt(1/4x3/4
inch)(Figure2orFigure3).
5.Installthenewblowercoverusingtheexisting
hardwarepreviouslyremoved(Figure2orFigure3).
6.Installtheplasticplugintheexistingbeltcover
(
Figure2orFigure3).
2
g013159
7
8
Figure2
Formodel78551(48inch(122cm))and78552(52inch
(132cm))
1.Existinghardware5.Plasticplug
2.Newblowercover6.Existingbeltcover
3.Bolt(1/4x3/4inch)7.Washer(1/4inch)
4.Washer(5/16inch)8.Pushnut(1/4inch)
g013160
4
7
Figure3
Formodel78553(60inch(152cm))
1.Existinghardware5.Plasticplug
2.Newblowercover6.Existingbeltcover
3.Bolt(1/4x3/4inch)7.Pushnut(1/4inch)
4.Washer(5/16inch)
4
InstallingtheGuards
Partsneededforthisprocedure:
1
Leftguard
1Backguard
1Frontguard
1Lowerguard
1
Bolt(5/16x3/4inch)
1
Flangenut(5/16inch)
Procedure
1.Removetheexistinghardwarearoundtheblowerfor
theleftguard,lowerguardandbackguard(
Figure4
orFigure5).Saveallexistinghardware
2.Installtheleftguardwithexistinghardware(Figure4
orFigure5).
3.Installthebackguardwithexistinghardware
(Figure4orFigure5).
4.Installthelowerguardwithexistinghardware
(
Figure4orFigure5).
5.Installthefrontguardwithabolt(5/16x3/4inch)
andaangenut(5/16inch)(Figure4orFigure5).
3
g016066
1
9
Figure4
Formodel78551(48inch(122cm))and78552(52inch
(132cm))
1.Existinghardware6.Frontguard
2.Leftguard
7.Lowerguard
3.Backguard,52inch
(132cm)
8.Existingnuts
4.Flangenut(5/16inch)
9.Backguard,48inch
(122cm)
5.Bolt(5/16x3/4inch)
Figure5
Formodel78553(60inch(152cm))
1.Existinghardware
5.Bolt(5/16x3/4inch)
2.Leftguard
6.Frontguard
3.Backguard7.Lowerguard
4.Flangenut(5/16inch)
4
5
InstallingtheMuferGuard
Partsneededforthisprocedure:
1
Muferguard
Procedure
1.Removetheexistingmuferguardandsavethe
hardware.Savetheexistingmuferguardforuse
whenthebaggerisremoved.
2.Installthenewmuferguardwiththepreviously
removedhardware(
Figure6).
Figure6
1.Carriagebolt3.Newmuferguard
2.Flangenut
5
Notes:
6
Notes:
7
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Toro CE Kit, Model 78551 Blower and Drive Kit for 48in Bagging System Installation guide

Toro
Brand
Toro
Model
CE Kit, Model 78551 Blower and Drive Kit for 48in Bagging System
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents