Toro CE Kit, Model 78541 48in DFS E-Z Vac Collection System Installation guide
- Category
- Car kits
- Type
- Installation guide
This manual is also suitable for
FormNo.3365-242RevA
CEKit
forModel78531and7854148inE-ZVac™Bagger
ModelNo.117-3827
ModelNo.117-3828
InstallationInstructions
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
1
Nopartsrequired
–
Preparethemower.
Warningdecal1
2
Covermissingdecal
1
Installthedecals.
Blowercover1
Bolt(5/16x5/8inch)
1
U-nut1
Flatwasher(5/16inch)
1
3
Pushnut(5/16inch)
1
Installthecovers.
Leftguard
1
Backguard1
Frontguard1
Lowerguard1
Bolt(5/16x3/4inch)
2
4
Flangenut(5/16inch)
2
Installtheguards.
U-bolt(3/8x1inch)
2
Flangenut(3/8inch)
4
5
Weight3
Installthemountingbrackets.
1
PreparingtheMower
NoPartsRequired
Procedure
1.Thoroughlycleanmowerdeck.Alldebrismustbe
removedtoensurethekitwilltproperly.
2.Repairallbentordamagedareasandreplaceany
missingparts.
©2010—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved
2
InstallingtheDecals
Partsneededforthisprocedure:
1Warningdecal
1
Covermissingdecal
Procedure
1.Removetheexistingblowercover(Figure2).Save
thehardware.
2.Cleantheareawherethedecalswillgo(
Figure1).
3.InstallthedecalsasshowninFigure1.
Figure1
1.Covermissingdecal
2.Warningdecal
3
InstallingtheCovers
Partsneededforthisprocedure:
1Blowercover
1
Bolt(5/16x5/8inch)
1U-nut
1
Flatwasher(5/16inch)
1
Pushnut(5/16inch)
Procedure
1.Removetheexistingbeltcover(Figure2).Saveall
existinghardware
2.Removethelatchfromthebeltcover.
3.Drilla11/32inchdiameterholewheretheexsitng
latchinthebeltcoverwasinstalled(
Figure2).
4.Installthebolt(5/16x5/8inch)intothecoverand
secureittothebeltcoverwithawasher(5/16inch)
andpushnut(5/16inch)(Figure2).
5.Installthebeltcoverandtightenthebolt(5/16x
5/8inch)(Figure2).
6.InstalltheU-nutintothebeltcoverbracket
(
Figure2).
7.Installthenewblowercover(Figure2).
g013158
6
7
8
Figure2
1.Existinghardware
5.Drilla11/32inchdiameter
holeinthebeltcover
2.Newblowercover
6.Flatwasher(5/16inch)
3.Existingbeltcover
7.Pushnut(5/16inch)
4.Bolt(5/16x5/8inch)
8.U-nut
2
4
InstallingtheGuards
Partsneededforthisprocedure:
1
Leftguard
1Backguard
1Frontguard
1Lowerguard
2
Bolt(5/16x3/4inch)
2
Flangenut(5/16inch)
Procedure
1.Removetheexistinghardwarearoundtheblowerfor
theleftguard,lowerguardandbackguard(
Figure3).
Saveallexistinghardware
2.Installtheleftguardwithexistinghardware
(
Figure3).
3.Installthebackguardwithexistinghardware
(Figure3).
4.Installthelowerguardwithexistinghardware
(Figure3).
5.Installthefrontguardwitha2bolts(5/16x3/4
inch)and2angenuts(5/16inch)(
Figure3).
Figure3
1.Existinghardware5.Frontguard
2.Leftguard6.Bolt(5/16x3/4inch)
3.Backguard7.Lowerguard
4.Flangenut(5/16inch)
3
-
1
-
2
-
3
-
4
Toro CE Kit, Model 78541 48in DFS E-Z Vac Collection System Installation guide
- Category
- Car kits
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Toro CE Kit, Model 78552 Blower and Drive Kit for 52in Bagging System Installation guide
-
Toro CE Kit, 132cm Z Master 4000 Series Riding Mower Installation guide
-
-
-
-
-
Toro Bagger Kit, Z Master 4000 Series Riding Mower User manual
-
-
-
