ADLINK Technology AmITX-BT-I User manual

Brand: ADLINK Technology

Model: AmITX-BT-I

Category: Motherboards

Type: User manual

AmITX-BT-I

User’s Manual

Mini-ITX Embedded Motherboard with

4th Gen Intel® Atom™ Processor E3800

Manual Revision: 1.00

Revision Date:

November 19, 2015

Part Number: 50-1X011-1000

Page 2 AmITX-BT-I

Revision History

Revision Description Date By

CJ 11-19-5102Initial release 00.1

AmITX-BT-I Page 3

Preface

This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by

any mechanical, electronic, or other means in any form without prior written permission of the manufacturer.

Disclaimer

The information in this document is subject to change without prior notice in order to improve reliability, design, and function and does not

represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or

consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such

damages.

Environmental Responsibility

ADLINK is committed to fulfill its social responsibility to global environmental preservation through compliance with the European Union's

Restriction of Hazardous Substances (RoHS) directive and Waste Electrical and Electronic Equipment (WEEE) directive. Environmental

protection is a top priority for ADLINK. We have enforced measures to ensure that our products, manufacturing processes, components, and

raw materials have as little impact on the environment as possible. When products are at their end of life, our customers are encouraged to

dispose of them in accordance with the product disposal and/or recovery programs prescribed by their nation or company.

AmITX-BT-I is a RoHS compliant and leadfree product

Trademarks

Product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their

respective companies.

Page 4 AmITX-BT-I

Table of Contents

Revision History ............................................................................................................ 2

Preface............................................................................................................................ 3

1. Introduction .......................................................................................................... 7

1.1. Packing List ............................................................................................................................7

1.2. Optional Accessories .............................................................................................................7

2. Specifications........................................................................................................ 8

2.1. Core System...........................................................................................................................8

2.2. Rear I/O Connectors ..............................................................................................................8

2.3. Internal Headers and Connectors..........................................................................................8

2.4. Form Factor ...........................................................................................................................9

2.5. SEMA Board Controller..........................................................................................................9

2.6. Debug Header........................................................................................................................9

2.7. Video......................................................................................................................................9

2.8. Audio......................................................................................................................................9

2.9. LAN.........................................................................................................................................9

2.10. Power Specification ...............................................................................................................9

2.11. Operating Temperatures .................................................................................................... 10

2.12. Environmental .................................................................................................................... 10

2.13. Operating Systems.............................................................................................................. 10

2.14. Power Consumption ........................................................................................................... 10

2.15. Functional Diagram............................................................................................................. 12

3. Mechanical Layout .............................................................................................

3.1. Connector Locations ........................................................................................................... 13

3.2. Mechanical Dimensions...................................................................................................... 14

3.3. Thermal Solutions............................................................................................................... 16

4. Connectors and Jumpers ................................................................................... 17

4.1. Rear IO Connectors............................................................................................................. 17

4.1.1. DC Power Inlet...................................................................................................................................17

4.1.2. Serial COM Ports (COM1, COM2) ......................................................................................................18

4.1.3. VGA Connector (VGA)........................................................................................................................19

4.1.4. HDMI Connector................................................................................................................................19

4.1.5. Ethernet Connectors (LAN1, LAN2) ...................................................................................................20

4.1.6. USB 3.0 Connectors (USB1-4) ............................................................................................................20

4.1.7. Audio Connectors (Line-out, Mic-in) .................................................................................................21

4.2. Internal Connectors ............................................................................................................ 21

AmITX-BT-I Page 5

4.2.1. ATX Power Connector (ATX_PWR, proprietary) ................................................................................21

4.2.2. SATA Connectors (SATA1, SATA2) .....................................................................................................22

4.2.3. SATA Power Connector (ST_PWR).....................................................................................................22

4.2.4. USB Header........................................................................................................................................23

4.2.5. PS/2 Keyboard and Mouse Connector ..............................................................................................24

4.2.6. Internal Audio Connector ..................................................................................................................24

4.2.7. CPU Fan and System Fan Connectors................................................................................................25

4.2.8. Serial COM Port Connectors..............................................................................................................25

4.2.9. LVDS Connector.................................................................................................................................27

4.2.10. LVDS Auxiliary Connector ................................................................................................................28

4.2.11. Front Panel Connector.....................................................................................................................29

4.2.12. Feature Connector...........................................................................................................................30

4.2.13. SPI Header .......................................................................................................................................31

4.2.14. DB40 Debug Board Connector.........................................................................................................32

4.3. Jumper and Switch Settings................................................................................................ 33

4.3.1. ATX/AT Mode Jumper Selection (JPY1) .............................................................................................33

4.3.2. Clear CMOS and BIOS Default (JP5)...................................................................................................33

4.3.3. Reset BIOS Defaults (JP6) ..................................................................................................................33

4.3.4. SATA2/mSATA Select (JP1) ................................................................................................................33

4.3.5. LVDS Backlight Power Jumper Selection (JP2)...................................................................................34

4.3.6. LVDS Panel Power Jumper Selection (JP3) ........................................................................................34

4.3.7. LVDS Backlight Enable Jumper Selection (JP4) ..................................................................................34

4.3.8. Serial Port Mode Switch Setting (SW14, SW10, SW11).....................................................................35

4.3.9. BIOS Switch Setting (SW1).................................................................................................................35

4.4. Onboard Connector Information........................................................................................ 36

5. Driver Installation............................................................................................... 37

6. Smart Embedded Management Agent (SEMA) ..............................................

6.1. Board Specific SEMA Functions .......................................................................................... 38

6.1.1. Voltages.............................................................................................................................................38

6.1.2. Main Current .....................................................................................................................................39

6.1.3. BMC Status ........................................................................................................................................39

6.1.4. Exception Codes ................................................................................................................................39

6.1.5. BMC Flags ..........................................................................................................................................40

7. System Resources............................................................................................... 41

7.1. System Memory Map ......................................................................................................... 41

7.2. I/O Map............................................................................................................................... 41

7.2.1. I/O Map .............................................................................................................................................41

7.2.2. IRQ Lines PIC mode............................................................................................................................42

Page 6 AmITX-BT-I

7.2.3. IRQ Lines APIC mode .........................................................................................................................43

7.3. PCI Configuration Space Map ............................................................................................. 44

7.4. PCI Interrupt Routing Map.................................................................................................. 45

7.5. SMBus Slave Address.......................................................................................................... 45

8. BIOS Setup .......................................................................................................... 46

8.1. Menu Structure................................................................................................................... 46

8.2. Main.................................................................................................................................... 47

8.2.1. System Information ...........................................................................................................................47

8.2.2. Processor Information.......................................................................................................................47

8.2.3. VGA Firmware Version ......................................................................................................................47

8.2.4. Memory Information.........................................................................................................................47

8.2.5. SOC Information ................................................................................................................................47

8.2.6. System Management.........................................................................................................................48

8.2.7. System Date and Time.......................................................................................................................51

8.3. Advanced ............................................................................................................................ 52

8.3.1. CPU ....................................................................................................................................................52

8.3.2. Memory .............................................................................................................................................52

8.3.3. Graphics.............................................................................................................................................53

8.3.4. SATA ..................................................................................................................................................54

8.3.5. USB ....................................................................................................................................................55

8.3.6. Network.............................................................................................................................................56

8.3.7. PCI and PCIe.......................................................................................................................................56

8.3.8. Super IO.............................................................................................................................................59

8.3.9. ACPI and Power Management...........................................................................................................60

8.3.10. Sound...............................................................................................................................................60

8.3.11. Serial Port Console ..........................................................................................................................61

8.3.12. Thermal ...........................................................................................................................................62

8.3.13. Miscellaneous..................................................................................................................................62

8.4. Boot .................................................................................................................................... 64

8.4.1. Boot Configuration ............................................................................................................................64

8.5. Security ............................................................................................................................... 65

8.5.1. Password Description ........................................................................................................................65

8.6. Save & Exit .......................................................................................................................... 65

Safety Instructions ......................................................................................................

Getting Service ............................................................................................................

AmITX-BT-I Page 7

1. Introduction

The AmITX-BT-I is a Mini-ITX motherboard supporting the Intel

Atom™ processor E3800 Series and Intel

Celeron

processor system-on-

chip (SoC). The AmITX-BT-I is specifically designed for customers who need high-level processing and graphics performance with low

power consumption in a long product life solution.

The Intel

Atom™ processor E3800 and Intel

Celeron

processor support non-ECC type DDR3L dual-channel memory at 1066/1333 MHz

to provide excellent overall performance. Integrated Intel® Gen7 HD Graphics includes features such as OpenGL 3.1, DirectX 11, OpenCL

1.1 and support for H.264, MPEG2, VC1, VP8 hardware decode. Graphics outputs include VGA, DDI ports supporting HDMI and optional

dual-channel 18/24-bit LVDS. The AmITX-BT-I has dual stacked SODIMM sockets for up to 8 GB non-ECC type DDR3L memory.

The AmITX-BT-I features dual Gigabit Ethernet port, USB 3.0 ports and USB 2.0 ports, and SATA 3 Gb/s ports. Support is provided for

SMBus and I

C. The module is equipped with SPI AMI EFI BIOS, supporting embedded features such as hardware monitor and watchdog

timer.

CPU Intel Bay Trail SoC Core Speed Total Design Power

AmITX-BT-I-E3845 Atom™ E3845 (4 cores) 1.91 GHz 10W

AmITX-BT-I-E3827 Atom™ E3827 (2 cores) 1.75 GHz 8W

AmITX-BT-I-E3826 Atom™ E3826 (2 cores) 1.46 GHz 7W

AmITX-BT-I-E3825 Atom™ E3825 (2 cores) 1.33 GHz 6W

AmITX-BT-I-E3815 Atom™ E3815 (1 core) 1.46 GHz 5W

AmITX-BT-I- N2930 Celeron® N2930 (4 cores) 1.83/2.16 (Burst) GHz 7.5W

AmITX-BT-I-J1900 Celeron® J1900 (4 cores) 2.0/2.42 (Burst) GHz 10W

Latest revision of the datasheet, user’s manual, BIOS, drivers, and board support packages, can be downloaded from the product webpage:

www.adlinktech.com/PD/web/PD_detail.php?cKind=&pid=1444.

1.1. Packing List

• AmITX-BT-I Mini-ITX motherboard

• ATX/AT power cable (P/N: 30-20872-0000)

• SATA dual power cable (P/N: 30-20875-0000)

• SATA cable (P/N: 30-10057-0600)

• Rear I/O shield (P/N: 34-25313-0000)

1.2. Optional Accessories

• COM port cable, 1 port (P/N: 30-20876-0000)

• PS/2 KB/MS cable (P/N: 30-20873-0000)

• USB 2.0 cable, 2 ports (P/N: 30-20874-1000)

Page 8 AmITX-BT-I

2. Specifications

2.1. Core System

¾ CPU: Single, dual or quad-core Intel® Atom™ or Celeron® Processor

• Atom™ E3845 1.91 GHz 542/792 (Turbo) 10W (4C/1333)

• Atom™ E3827 1.75 GHz 542/792 (Turbo) 8W (2C/1333)

• Atom™ E3826 1.46 GHz 533/667 (Turbo) 7W (2C/1066)

• Atom™ E3825 1.33 GHz 533 (No Turbo) 6W (2C/1066)

• Atom™ E3815 1.46 GHz 400 (No Turbo) 5W (1C/1066)

• Celeron® N2930 1.83/2.16 (Burst) GHz, 313/854 (Turbo) 7.5W (4C/1333)

• Celeron® J1900 2.0/2.42 (Burst) GHz, 688/854 (Turbo) 10W (4C/1333)

Supports: Single, dual or quad Out-of-Order Execution (OOE) processor cores, Intel® VT-x, Intel® SSE4.1 and SSE4.2, Intel® 64

architecture, IA 32-bit, PCLMULQDQ Instruction, DRNG, Intel® Thermal Monitor (TM1 & TM2)

Note: Availability of features dependent on processor SKU.

¾ Cache: Primary 32 kB, 8-way L1 instruction cache and 24 kB, 6-way L1 write-back data cache

¾ Memory: Dual channel non-ECC 1066/1333 MHz DDR3L memory up to 8GB in dual stacked SODIMM sockets

¾ Embedded BIOS: AMI EFI in 8MB SPI BIOS

2.2. Rear I/O Connectors

¾ Display: VGA and HDMI

¾ LAN: Dual GbE RJ-45

¾ USB: 4x USB 3.0

¾ Serial: 1x RS-232 (COM1 supports console redirection), 1x RS-232/422/485

¾ Aduio: Line-Out, Mic-In

¾ Power: Screw Jack for 12V DC-in

2.3. Internal Headers and Connectors

¾ PCIe x1

¾ 2x Mini PCIe: one PCIe+USB (top side); one mSATA+USB (bottom side)

¾ USB: 2x USB 2.0 via onboard header, 2x USB 2.0 via front panel connector

¾ SATA: 2x SATA 3Gb/s (SATA0, SATA1)

¾ SATA Power Connector

¾ eMMC: Soldered on Module Bootable eMMC Flash Storage 8 to 64 GB (optional)

¾ Serial: 2x RS-232 headers, 2x RS-232/422/485 headers with 5V power (12V by BOM option)

¾ LVDS: Supports non-EDID type LCD panels only

¾ SIM Card Holder:

¾ Front Panel Header

¾ Audio Header

¾ Feature Connector Header

¾ PS/2 KB/MS Connector

¾ TPM Header

¾ SPI Header

¾ ATX Power Connector

AmITX-BT-I Page 9

2.4. Form Factor

¾ Mini-ITX: 170mm x 170mm

2.5. SEMA Board Controller

¾ ADLINK Smart Embedded Management Agent (SEMA)

• Voltage/Current monitoring

• Power sequence debug support

• AT/ATX mode control

• Logistics and Forensic information

• Flat Panel Control

• General Purpose I2C

• Failsafe BIOS (dual BIOS )

• Watchdog Timer and Fan Control

2.6. Debug Header

¾ 40-pin Multipurpose Flat Cable Connector:, used in combination with DB-40 debug module providing BIOS POST code LED, BMC

access, SPI BIOS flashing, Power Testpoints, Debug LEDs

2.7. Video

¾ GPU Feature Support: 7th generation graphics Intel core architecture with four execution units supporting two independent displays

• 3D graphics hardware acceleration

• Support for DirectX11, OCL 1.1, OGL ES Halt/2.0/1.1, OGL 3.2

• Video decode hardware acceleration including support for H.264, MPEG2, VC-1, WMV and VP8 formats

• Video encode hardware acceleration including support for H.264, MPEG2 and MVC formatsPlayback of Blu-ray disc S3D content

using HDMI (1.4a spec compliant with 3D)

Note: Availability of features may vary between operating systems.

¾ Display Interface support

• VGA: Analog VGA supporting resolutions up to 2560x1600 x24bpp at 60 Hz

• HDMI: HDMI 1.3a

• LVDS: Supports non-EDID type LCD panels only, Single/Dual Channel 18 and 24-bit, supports 1920 x 1200 at 60 Hz resolution in

dual LVDS bus mode

2.8. Audio

¾ Integrated: Intel® HD Audio integrated in SOC

¾ Audio Codec: ALC886

2.9. LAN

¾ Intel MAC/PHY: Intel® i211AT (MAC/PHY) Ethernet controller

¾ Interface: 10/100/1000 GbE connection

2.10. Power Specification

¾ Power Modes: AT and ATX mode (AT mode start controlled by BMC)

¾ Standard Voltage Input: ATX = 12V ±5%, 5Vsb ±5% or AT = 12V ±5%

¾ Power Management: ACPI 4.0 compliant

¾ Power States: Supports C1-C6, S0, S1, S4, S3, S5, (Wake-on-USB S3/S4, WoL S3/S4/S5)

Page 10 AmITX-BT-I

2.11. Operating Temperatures

¾ Standard: 0°C to 60°C

¾ Extreme Rugged™: -40°C to 85°C* (optional)

*Note: Intel® Atom™ E3800 Series processors only

2.12. Environmental

¾ Humidity: 10-90% RH operating, non-condensing

5-95% RH storage (and operating with conformal coating)

¾ Shock and Vibration: IEC 60068-2-64 and IEC-60068-2-27

MIL-STD-202F, Method 213B, Table 213-I, Condition A and Method 214A, Table 214-I, Condition D

¾ HALT: Thermal Stress, Vibration Stress, Thermal Shock and Combined Test

2.13. Operating Systems

¾ Standard Support: Windows 7/8 32/64-bit, Linux 32/64-bit

¾ Extended Support (BSP): WES7, WE8S, WEC7, Linux, VxWorks

2.14. Power Consumption

System Configuration

Processor Intel® Atom™ Processor E3845 (2M Cache, 1.91 GHz)

Memory Slot1 Transcend 8G 2Rx8 DDR3L 1600 SODIMM

Memory Slot2 Transcend 8G 2Rx8 DDR3L 1600 SODIMM

Graphics Intel® HD Graphics

Storage WD WD3200BUDT 320GB, 2.5" SATA 3Gb/s HDD

Monitor BenQ GW2255

Power Supply FSP FSP350-60PFG 350W ATX

Video Resolution 1920 x 1080 @32-bit

¾ Intel® Atom™ processor E3845 @ 1.91 GHz

Power State Current(A) / Voltage (V) Power (W)

Windows 7 (Idle) 0.61/11.82 7.2102

Windows 7 (Typical) 0.92/11.78 10.8376

Windows 7 (Max loading) 1.08/11.77 12.7116

S3 0.3/5.02 1.506

AmITX-BT-I Page 11

¾ Intel Celeron CPU N2930 @ 1.83GHz

System Configurations

Processor Intel® Celeron® Processor N2930 (2M Cache, 1.83 GHz)

Memory Slot1 Transcend 8G 2Rx8 DDR3L 1600 SODIMM

Memory Slot2 Transcend 8G 2Rx8 DDR3L 1600 SODIMM

Graphics Intel® HD Graphics

HDD WD WD3200BUDT 320GB, 2.5" SATA II HD

Monitor Hanns.G HZ222

Power Supply FSP FSP600-80PSA 600W ATX

Video Resolution 1680 x 1050 @32-bit

Power State Current(A) / Voltage (V) Power (W)

Windows 7 (Idle) 0.58/12.03 6.9774

Windows 7 (Typical) 0.89/12.03 10.7067

Windows 7 (Max loading) 1.02/12.03 12.2706

S3 0.25/5.00 1.25

Page 12 AmITX-BT-I

2.15. Functional Diagram

AmITX-BT-I Page 13

3. Mechanical Layout

3.1. Connector Locations

12V DC-in

COM1

COM2

VGA

HDMI

LAN

USB 3.0

Line-out

Mic-in

LAN

USB 3.0

PCIe x1

mSATA Slot

Stacked SODIMMs

2x SATA 3Gb/s

Mini PCIe

Front Panel

Connector

Audio Connector

12V DC-in

4x COM Ports

ATX Power

Feature

Connector

LVDS

USB Header

SPI Header

DB40 Connector

TPM Header

PS/2 KB/MS

SATA Power

SIM Card Slot

Page 14 AmITX-BT-I

3.2. Mechanical Dimensions

Top View

Dimensions: mm

All Φ tolerances ±0.05mm

Other tolerances ±0.2mm

AmITX-BT-I Page 15

Side View

With AmITX-BT_4010- CJ Cooler (Standard Temp.: 0°C to +60°C)

With AmITX-BT_4020-CJ Cooler (Extreme Rugged™: -40°C to +85°C, Intel® Atom™ E38xx only)

Dimensions: mm

All tolerances ±0.2mm

Page 16 AmITX-BT-I

3.3. Thermal Solutions

AmITX-BT_4010-RG Cooler with Fan

Standard Temp.: 0°C to 60°C

P/N: 32-20493-1000

AmITX-BT_4010- CJ Cooler with Fan

Standard Temp.: 0°C to 60°C

P/N: 32-20493-0000

AmITX-BT_CU-CJ Passive Heatsink

Standard Temp.: 0°C to 60°C

P/N: 32-20510-0000

AmITX-BT_4020-CJ Cooler with Fan

Extreme Rugged™: -40°C to +85°C (Atom™ E38xx only)

P/N: 32-20494-0000

AmITX-BT-I Page 17

4. Connectors and Jumpers

See 3.1 Connector Locations on page 13 for connector locations.

4.1. Rear IO Connectors

4.1.1. DC Power Inlet

The AmITX-BT-I supports a screw-type external 12V DC-in power connector. Maximum current draw is 10A.

Note: Either the DC Power Inlet or

the internal ATX Power Connector (ATX_PWR) must be used to supply the motherboard with +12V ±5%.

JACK1

PWR-JACK_P1

VCC

GND1

GND2

Caution:

Hot-plugging the power supply is not supported. Doing so may damage the board.

Only connect ONE power supply to the board. Connecting power to both the 12V

DC-inlet and the internal ATX Power Connector ma

dama

e the board.

Page 18 AmITX-BT-I

4.1.2. Serial COM Ports (COM1, COM2)

 COM1: Supports RS-232/422/485

 COM2: Supports RS-232 only

Pin # RS-232 RS-422 RS-485

1 DCD, Data Carrier Detect TX- RTX-

2 RXD, Receive Data TX+ RTX+

3 TXD, Transmit Data RX+ N/A

4 DTR, Data Terminal Ready RX- N/A

5 GND N/A N/A

6 DSR, Data Set Ready N/A N/A

7 RTS, Request To Send N/A N/A

8 CTS, Clear To Send N/A N/A

9 RI, Ring Indicator N/A N/A

 SW14: Switch for mode selection of COM1 (default RS-232).

SW14

AmITX-BT-I Page 19

4.1.3. VGA Connector (VGA)

Signal Pin # Pin # Signal

Red 1 2 Green

Blue 3 4 VCC pull-up

GND 5 6 GND

GND 7 8 GND

VCC 9 10 GND

VCC pull-up 11 12 DDC2B DATA

HSYNC 13 14 VSYNC

DDC2B CLK 15

4.1.4. HDMI Connector

Pin # Signal Pin # Signal

1 TMDS Data2+ 2 TMDS Data2 Shield

3 TMDS Data2– 4 TMDS Data1+

5 TMDS Data1 Shield 6 TMDS Data1–

7 TMDS Data0+ 8 TMDS Data0 Shield

9 TMDS Data0– 10 TMDS Clock+

11 TMDS Clock Shield 12 TMDS Clock–

13 CEC 14 Reserved

15 SCL 16 SDA

17 DDC/CEC Ground 18 +5 V Power

19 Hot Plug Detect

Page 20 AmITX-BT-I

4.1.5. Ethernet Connectors (LAN1, LAN2)

Pin # 10BASE-T/100BASE-TX 1000BASE-T

1 TX+ LAN_MDI0+

2 TX- LAN_MDI0-

3 RX+ LAN_MDI1+

4 -- LAN_MDI2+

5 -- LAN_MDI2-

6 RX- LAN_MDI1-

7 -- LAN_MDI3+

8 -- LAN_MDI3-

LED1 (Speed) LED2 (Link/Activity)

Status Description Status Description

Off 10 Mb connection Off No Link

Green 100 Mb connection Orange Linked

Orange 1 Gb connection Blinking Data Activity

4.1.6. USB 3.0 Connectors (USB1-4)

Pin # Signal

1 USB3.0_P5VA

2 USB2_CMAN

3 USB2_CMAP

4 GND

5 USB3A_CMRXN

6 USB3A_CMRXP

7 GND

8 USB3A_CMTXN

9 USB3A_CMTXP

Page is loading ...

ADLINK Technology AmITX-BT-I User manual

Brand: ADLINK Technology

Model: AmITX-BT-I

Category: Motherboards

Type: User manual

Download PDF

report

ADLINK Technology AmITX-BT-I User manual

ADLINK Technology AmITX-BT-I User manual

Related papers

Other documents