2. Phoenix Gold
  3. ZDSKFO1
ZDSKFO1

Phoenix Gold ZDSKFO1 Installation guide

  • Hello! I've reviewed the installation guide for the Phoenix Gold Speaker ZD series ZDSKFO1. This document provides detailed instructions for installing the speaker system in Fiat Ducato vehicles. It covers steps for replacing door speakers, removing A-pillars, dealing with roof panels, and even tweeter installation. I am ready to help you with any questions about this installation process.
  • What tools are required for the installation?
    What vehicle is this installation guide for?
    What is the first step in the front door speaker installation?
    What should I do when the top metal bar is loose?
1
ZDSKFO1
Installation Tools Required
2
PH2 Screwdriver T15 Screwdriver Plastic Pry Tool
Vehicle used for installation:*
Fiat Ducato 2014 - 2021 (X290)
Basic Sound System
*Some differences may occur between different car and
year models.
PZ2 Screwdriver
ZDSKFO1 Installation 1
Tools required:
3
1. Front door speaker installation 2. Pull out the speaker grill
3. Remove the speaker grill 4. OEM Speaker
1x Plastic Pry Tool
ZDSKFO1 Installation 2
Tools required:
4
5. Disconnect the speaker connector 6. Unscrew the OEM speaker
7. Connect the speaker connector 8. Screw the speaker adapter in place
1x T15 Screwdriver
ZDSKFO1 Installation 3
Tools required:
5
9. Connect the speaker harness 10. Screw the speaker in place
11. Speaker screwed in place 12. Refit the speaker grill
1x PH2 Screwdriver
ZDSKFO1 Installation 4
Tools required:
6
13. Remove the a-pillars 14. Unscrew the roof panel (step 15)
15. Unscrew all five roof panel screws 16. Loosen part of the rubber strip
1x PH2 Screwdriver
ZDSKFO1 Installation 5
Tools required:
7
17. Pull the a-pillar outwards 18. Do the same on the other side
19. Unscrew the top screw 20. Do the same on the other side
1x PZ2 Screwdriver
ZDSKFO1 Installation 6
Tools required:
8
21. The top metal bar is now loose 22. Pull out the top metal bar
23. Pull out the panel 24. Unscrew the screw
1x PZ2 Screwdriver
ZDSKFO1 Installation 7
Tools required:
9
25. Do the same on the other side 26. Pull out the lower metal bar
27. Disconnect the tweeter connector 28. Unscrew the two screws
1x PZ2 Screwdriver
ZDSKFO1 Installation 8
Tools required:
10
29. Bring out the tweeter to the a-pillar 30. Press the tweeter into place
31. Reassemble a-pillars in reverse 32. Installation is now complete
11
On Behalf of the Phoenix Gold team,
Thank you for choosing us!
Your installation is complete and we hope that your new
upgraded system will bring you joy and happiness for many
years to come when listening to your favorite music. As
always, our goal is bringing you The Gold Standard in Sound.
www.phoenixgold-eu.com
/