2. Boston Whaler
  3. 130 Super Sport Tool Holder

Boston Whaler 130 Super Sport Tool Holder, 170 Super Sport Tool Holder Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Boston Whaler 130 Super Sport Tool Holder Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
ACCESSORY INSTALLATION
INSTRUCTIONS
RAIL MOUNTED TOOL HOLDER
Installation Instructions for the 130, 150 & 170 Super Sport
Issue Date
05/07/2010
REV. C
PROCEDURE NO.
AI-MS-013
Pa
g
e 2 of 2
1. PURPOSE
Provide step-by-step procedure for the rail mounted
cup holder installation.
2. SCOPE
This procedure is limited to the rail mounted tool holder
installation on the 130, 150 & 170 Super Sport.
3. DEFINITION
3.1. Not Applicable
4. RESPONSIBILITY
4.1. Not Applicable
5. TOOLS/EQUIPMENT REQUIRED
5.1. Hex Wrench (supplied)
5.2. Hardware (supplied)
6. SAFETY
6.1. Safety glasses or goggles are recommended.
7. FORMS
7.1. Not applicable
CONTENTS OF KIT PART #
1- TOOL HOLDER. . . . . . . . . . . . .1952626
2- CLAMSHELL BRACKET (SUPPLIED)
3- HARDWARE (SUPPLIED)
Page 1 of 2
ACCESSORY INSTALLATION
INSTRUCTIONS
RAIL MOUNTED TOOL HOLDER
Installation Instructions for the 130, 150 & 170 Super Sport
Issue Date
05/07/2010
REV. C
PROCEDURE NO.
AI-MS-013
8. PROCEDURE
8.1. Place the tool holder on the rail at the desired location
(as shown).
8.2. Using the Hex Head wrench and the hardware
supplied, insert and tighten the bolts at the six (three
top & three bottom) locations on the clamshell clamp.
Rail Mounted tool Holder Installation Is Complete
Page 2 of 2
/