ACCESSORY INSTALLATION
INSTRUCTIONS
RAIL MOUNTED CUP HOLDER
Installation Instructions for the 130, 150 & 170 Super Sport
Issue Date
05/07/2010
REV: C
PROCEDURE NO.
AI-MS-014
1. PURPOSE
Provide step-by-step procedure for the rail mounted
cup holder installation.
2. SCOPE
This procedure is limited to the rail mounted cup holder
installation on the 130, 150 & 170 Super Sport.
3. DEFINITION
3.1. Not Applicable
4. RESPONSIBILITY
4.1. Not Applicable
5. TOOLS/EQUIPMENT REQUIRED
5.1. Hex Wrench (supplied)
5.2. Hardware (supplied)
6. SAFETY
6.1. Safety glasses or goggles are
recommended.
7. FORMS
7.1. Not applicable
CONTENTS OF KIT PART
#
1- CUP HOLDER ...............................1970057
2- HARDWARE (SUPPLIED)
3- CLAMSHELL BRACKET (SUPPLIED)
Page 1 of 2
ACCESSORY INSTALLATION
INSTRUCTIONS
RAIL MOUNTED CUP HOLDER
Installation Instructions for the 130, 150 & 170 Super Sport
Issue Date
05/07/2010
REV: C
PROCEDURE NO.
AI-MS-014
Pa
g
e 2 of 2
8. PROCEDURE
8.1. Place the cup holder on the rail at the desired location
(as shown).
8.2. Using the Hex Head wrench and the hardware
supplied, insert and tighten the bolts at the six (three
top & three bottom) locations on the clamshell clamp.
Rail Mounted Cup Holder Installation Is Complete
-
1
-
2
Boston Whaler 130 Super Sport Cup Holder Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Boston Whaler 170 Super Sport Tool Holder Installation guide
-
-
-
-
-
-
-
-
-