Boston Whaler 150 Super Sport 170 Super Sport Tow Arch Rack Installation guide

Category
Rack accessories
Type
Installation guide
ACCESSORY INSTALLATION
INSTRUCTIONS
WAKE BOARD RACK
Installation Instructions for the 150 & 170 Super Sport
Issue Date
05/07/2010
Rev: A
PROCEDURE NO.
AI-MS-011
Pa
g
e 2 of 2
1. PURPOSE
Provide step-by-step procedure for the wake board
rack installation.
2. SCOPE
This procedure is limited to the wake board rack installation on the
150 &170 Super Sport.
3. DEFINITION
3.1. Not Applicable
4. RESPONSIBILITY
4.1. Not Applicable
.
5. TOOLS/EQUIPMENT REQUIRED
5.1. Hex Wrench (supplied)
5.2. Hardware (supplied)
6. SAFETY
6.1. Safety glasses or goggles are
recommended.
7. FORMS
7.1. Not applicable
CONTENTS OF KIT PART#
1- WAKE BOARD RACK ASSEMBLY...........1958266
2- HEX HEAD BRACKET BOLTS
3- RAIL CLAMPS
4- PIVOT BLOCK
5- HEX HEAD PLATE BOLTS
6- OVAL PLATE
7- HEX HEAD PIVOT BLOCK BOLT
8- WAKE BOARD RACKS
Page 1 of 2
ACCESSORY INSTALLATION
INSTRUCTIONS
WAKE BOARD RACK
Installation Instructions for the 150 & 170 Super Sport
Issue Date
05/07/2010
Rev: A
PROCEDURE NO.
AI-MS-011
8. PROCEDURE
8.1. Using the Hex Head Plate Bolts (4), secure the wake
board racks (7) to the oval plate (5).
8.2. Using the Hex Head bracket bolts (1) and the rail
clamps (2), secure the pivot block (3) to the arch rail (8).
NOTICE
When determining the position of the wake board
rack on the arch assure that the unit will not
compromise the safe handling of the boat or pose
a hazard to the passengers.
8.3. Using the Hex Head pivot block bolt (6), fasten the
wake board rack to the pivot block.
NOTE: Before tightening the pivot block bolt, rotate the
wake board rack unit to a desired position.
Wake Board Rack Installation Is Complete
Page 2 of 2
  • Page 1 1
  • Page 2 2

Boston Whaler 150 Super Sport 170 Super Sport Tow Arch Rack Installation guide

Category
Rack accessories
Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI