Lancool PC-K62R1 User manual

Category
Computer cases
Type
User manual

This manual is also suitable for

C50.K5800.11E-1
Case components
Hardware list
1
for cable management
Thumb screw: Short(6) / long(3)
for motherboard mounting
Please visit www.lancoolpc.com for FRANCE / GERMANY / SPAIN user's manual
Veuillez visiter www.lancoolpc.com pour le manuel d’installation en FRANÇAIS/ALLEMAND/ESPAGNOL.
Visite el sitio Web www.lancoolpc.com para obtener el manual del usuario en FRANCÉS ALEMÁN Y ESPAÑOL
Besuchen Sie bitte www.lancoolpc.com für die französische/ deutsche/ spanische Gebrauchsanleitung
Installation Guide
140mm blue LED fan x 2
* PC-K62 / 60 / 58 and C-02 are not compatible
Buzzer(1)
140mm fan
PC-K62
PC-K58
PC-K60
140mm fan x 2
Liquid-cooling
system tube
vents rubber
cover
Side panels installation
Patented
tool-less 5.25”
device
mounting
Patented
tool-less PSU
mounting
bracket
Clamp
Patented
tool-less PCI
add-on card
holder
120mm fan
Patented
tool-less
HDD cage
Pull the front panel toward
yourself.
3
Removable air filter
2
Slide panel backward of the
case, to release the side panel.
Romove the side panel.
1
ODD installation
Press plastic handle to
release the mounting
bracket.
Push the CD-ROM into the
ODD module,
close the bracket.
Top 140mm fan x2 (Optional)
Rubber pad(16)
for HDD module
3Pin to 4pin fan power
convector (1)
Bracket(1)
for power supply mounting
Screw(4)
for power supply mounting
Screw(12)
for 5.25", 2.5" mounting
Pull the top panel to
remove it.
There are air filters
inside 5.25" bezel,
and front panel.
bezel
Clamp
the
Removable air filter
By press the plastic
handles to release the
air filter air filter is
washable.
PSU installation
Place the PSU on the stand,
and push again the
rear panel.
Place the PSU bracket into
according slot as shown.
Lock the PSU bracket to secure
the PSU.
* For transportation, please use
the screws to secure the PSU
PCI Add-on card installation
Finish.
1
2
Open the aluminum latch to
remove the PCI slot bracket
Push the card into the
PCI slot, close the aluminum
latch to secure the card.
ports
Screw(2)
for rotate the HDD cage 90 degree
AC 97AUDIO
C50.K5800.11E-2
Optional accessories from Lian Li
POWER SW
RESET SW
POWER
LED
H.D.D LED
SPEAKER
WHITE
GRAY
WHITE
BLUE
WHITE
NC
GREEN
WHITE
ORANGE
BLACK
NC
NC
RED
GROUND
PWR
GROUND
Reset
PLED-
PLED+
IDE_LED-
IDE_LED+
Speaker
+5V
Front panel cable installation guide
Secure the stand-off on the M/B tray which match
with the M/B fix points, place the M/B on the stand-off
fasten with the thumb screws to secure.
!
Note: For area where hard
to reach use the
long thumb screw
!
!
I/O port installation
Close the plastic brackets
to secure.
Slide the HDD cage into the
HDD rack.
Hard disk installation
Secure the
2.5” HDD to
HDD cage with
screws.
Put anti-vibration rubbur
pad for reduce noise level.
Close the gate to secure the HDD
cage.
Open the plastic brackets
on HDD cage.
Cable clamp installation
Use cable clamp to tidy up
the cables.
Insert the cable clamp into
specific mounting point
* Remove clamp, use
tweezers to release the
cable clamp
Remove HDD cage (HDD cage can be rotate 90 degree)
Loose three screws to release the
tool-less HDD cage .
Rotate the HDD cage 90 degree
to specific mounting point
Secure the HDD cage with screw as hown
above
Insert the gate to the HDD cage, secure it with the thumb screw.
Loose thumb screw to release
the gate.
Insert the HDD into
the HDD cage
(Open the plastic bracket to release
the HDD from HDD cage)
CR-36TR-5EX-H34EX-332N BZ-U02B
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Lancool PC-K62R1 User manual

Category
Computer cases
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI