One For All OARK02R User manual

Brand
One For All
Model
OARK02R
Category
Other input devices
Type
User manual

One For All OARK02R is a kid's remote control that comes pre-programmed with 8 DIRECTV kids channels assigned to the logo keys. It also has the following capabilities:

  • Reprogrammable favorite channel keys: You can program any of the 8 logo keys to your favorite channels.
  • Power control settings: You can change the power control setting to turn on/off the DIRECTV receiver and TV in different orders or independently.
  • Mute button: The mute button can be used to save the TV code during the TV code search process.
  • LED indicator: The LED indicator blinks to indicate the status of the remote control during programming.

One For All OARK02R is a kid's remote control that comes pre-programmed with 8 DIRECTV kids channels assigned to the logo keys. It also has the following capabilities:

  • Reprogrammable favorite channel keys: You can program any of the 8 logo keys to your favorite channels.
  • Power control settings: You can change the power control setting to turn on/off the DIRECTV receiver and TV in different orders or independently.
  • Mute button: The mute button can be used to save the TV code during the TV code search process.
  • LED indicator: The LED indicator blinks to indicate the status of the remote control during programming.
2
3b
3a
1
3. Press the CH ^ key once per second until the
TV turns off.
4. When the TV turns off, press ON/OFF key.
If the TV turns on:
press MUTE to save the TV code.
If the TV does not turn on:
press CH v to go to the previous TV code and
press MUTE to save once the TV turns on.
NOTE: There are over 200 possible codes, so
the code search may take a few minutes.
Reprogramming Favorite Channel Keys
The Kid’s Remote comes pre-programmed with 8
DIRECTV kids channels assigned to the logo keys.
The pre-programmed keys can be programmed
to new channels by following the steps below.
CAUTION: This will program over the channel
that was pre-programmed at the factory.
To program a favorite channel:
1. While in Programming mode, press and hold
the key that you wish to assign a favorite
channel. The LED blinks twice. Release the key.
2. Press the digits for the channel number for
the favorite channel that you wish to add.
3. Press and hold the key that you wish to
assign again until the LED blinks twice.
4. Repeat steps above to assign another favorite
channel.
If the LED flashes one long blink, the entry
failed and must be repeated.
Note: The Kid’s Remote package comes with
stickers you can use to place over any keys you’ve
reprogrammed. Label the sticker first; then peel
it off the sheet and place it on top of the key.
Changing Power Control Settings
The ON/OFF key has a default setting to control
power on both the DIRECTV receiver (or cable
box if reprogrammed) and TV each time it is
pressed. To change this power control setting:
1. In CHILD or ADULT mode, hold down both
MUTE and ON/OFF for three seconds, until
the LED blinks twice.
2. Enter 9 9 5. The LED blinks twice.
3. Press ON/OFF.
4. Decide what you want the ON/OFF key to
turn on and off and in what order. Then press
the correct key from the following chart.
ON/OFF turns on/off... ...press:
satellite receiver and TV
(satellite receiver first)
0
satellite receiver and TV (TV
first)
1
satellite receiver only 2
TV only 3
5. Press and hold MUTE until the LED blinks twice.
ONE FOR ALL is a trademark
or is a registered trademark of
Universal Electronics Inc.
Page is loading ...
  • Page 1 1
  • Page 2 2

One For All OARK02R User manual

Brand
One For All
Model
OARK02R
Category
Other input devices
Type
User manual

One For All OARK02R is a kid's remote control that comes pre-programmed with 8 DIRECTV kids channels assigned to the logo keys. It also has the following capabilities:

  • Reprogrammable favorite channel keys: You can program any of the 8 logo keys to your favorite channels.
  • Power control settings: You can change the power control setting to turn on/off the DIRECTV receiver and TV in different orders or independently.
  • Mute button: The mute button can be used to save the TV code during the TV code search process.
  • LED indicator: The LED indicator blinks to indicate the status of the remote control during programming.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents