FLIR Latitude 9.2 User manual

Category
Software
Type
User manual
UVMS 9.2.2
Control Center
Help File
Latitude, Horizon,
Meridian
1.0 April 2023
i
© 2023 Teledyne FLIR LLC. All rights reserved worldwide. No parts of this document, in whole or in part,
may be copied, photocopied, translated, or transmitted to any electronic medium or machine readable
form without the prior written permission of Teledyne FLIR LLC.
Names and marks appearing on the products herein are either registered trademarks or trademarks of
Teledyne FLIR LLC. and/or its subsidiaries. All other trademarks, trade names, or company names
referenced herein are used for identification only and are the property of their respective owners.
This product is protected by patents, design patents, patents pending, or design patents pending.
Photographs and images appearing in this document may have been modified for illustrative purposes
using commercial image editing software and may not always reflect an actual product configuration.
For additional information visit https://www.flir.com/browse/security/video-management-systems/.
The contents of this document are subject to change.
Teledyne FLIR LLC
6769 Hollister Avenue
Goleta, CA 93117
USA
Support: https://support.flir.com
ii Latitude, Horizon, Meridian Control Center Help File April 2023
Document History
Version
Date
Comment
1
Initial release
Initial FLIR release
1.1
April 27, 2023
Software Update
Table of Contents
Table of Contents
April 2023 Latitude, Horizon, Meridian Control Center Help File iii
1. Getting Started ................................................................................................................. 1
Version 9.2.2 Quick Guide to Control Center Skin Changes .............................................. 1
1.1
Quick Contents ............................................................................................................. 2
1.2
Control Center ............................................................................................................... 3
1.3
About This File .............................................................................................................. 5
1.4
Using Help in Control Center .......................................................................................... 5
1.5
Log On using Command Line ......................................................................................... 5
1.6
2. Workspace ....................................................................................................................... 9
3. Application Menu ........................................................................................................... 11
Context Menu ............................................................................................................. 13
3.1
View/Viewing Mode ..................................................................................................... 17
3.2
Supervisor Mode ................................................................................................... 203.2.1
Monitor Mode ....................................................................................................... 213.2.2
Forensic Mode ..................................................................................................... 223.2.3
CaseBuilder Mode ................................................................................................ 233.2.4
Access Control Mode ........................................................................................... 243.2.5
Tools/Options Menu ..................................................................................................... 25
3.3
Content Display .................................................................................................... 253.3.1
Video .................................................................................................................. 283.3.2
View Settings ....................................................................................................... 353.3.3
Export ................................................................................................................. 453.3.4
Keyboard ............................................................................................................. 503.3.5
PTZ ..................................................................................................................... 503.3.6
Joystick ............................................................................................................... 513.3.7
Audio .................................................................................................................. 513.3.8
CaseBuilder ......................................................................................................... 523.3.9
Login Settings ...................................................................................................... 523.3.10
Working With Keyboards ...................................................................................... 533.3.11
Controlling the ControlCenter via CCTV Keyboard .................................................................. 55
3.3.11.1
Controlling the ControlCenter via the PC Keyboard ................................................................. 59
3.3.11.2
USB Joystick .................................................................................................................................... 63
3.3.11.3
Favorites ..................................................................................................................... 63
3.4
Add a Customized Layout to Your Favorites Menu ................................................... 643.4.1
Access a Customized Layout ................................................................................ 643.4.2
Edit a Saved Layout .............................................................................................. 653.4.3
Delete a customized layout ................................................................................... 653.4.4
Table of Contents
Table of Contents
iv Latitude, Horizon, Meridian Control Center Help File April 2023
4. Explorer Area - Navigation Pane .................................................................................... 67
Navigation Tree ............................................................................................................ 67
4.1
Query Pane ................................................................................................................ 71
4.2
GISMaps Bookmarks Search ................................................................................ 864.2.1
PTZ Pane ................................................................................................................... 88
4.3
CaseBuilder Query Pane .............................................................................................. 92
4.4
CaseBuilder Navigation Tree Pane .......................................................................... 934.4.1
Privacy Mask Password ............................................................................................... 96
4.5
5. Display Area - Viewing Pane ........................................................................................ 103
Layout Tabs .............................................................................................................. 103
5.1
Configuring Layouts ................................................................................................... 105
5.2
Thumbnail Search Layout .................................................................................... 1065.2.1
CaseBuilder Layout ............................................................................................. 1065.2.2
Viewing Tile ............................................................................................................... 108
5.3
Thumbnail Search ............................................................................................... 1195.3.1
Using Draw-to-zoom with Thumbnails ................................................................... 1205.3.2
Digital Presets .................................................................................................... 1205.3.3
Defining Digital Presets .............................................................................................................. 121
5.3.3.1
Using Digital Presets .................................................................................................................. 123
5.3.3.2
Quick View ........................................................................................................ 1255.3.4
Quick View enabled in a Pane ................................................................................................... 126
5.3.4.1
Using Quick View ......................................................................................................................... 127
5.3.4.2
Quick View in a new pane ........................................................................................................... 129
5.3.4.3
Quick View - further details ........................................................................................................ 130
5.3.4.4
Quick View in Playback ................................................................................................................ 131
5.3.4.5
Controlling Output Pins linked to Cameras ............................................................ 1325.3.5
Adaptive Streaming ............................................................................................. 1335.3.6
Hide/Show Privacy Mask (Deactivate) ................................................................... 1345.3.7
Spot Monitor ...................................................................................................... 1365.3.8
Viewing GIS Maps .............................................................................................. 1365.3.9
Manage Radar Zones/Tripwires ................................................................................................ 139
5.3.9.1
Panoramic Cameras ........................................................................................... 1415.3.10
Viewing Live and Recorded Video from connected DVRs ........................................ 1435.3.11
Viewing Modes for Alarms .......................................................................................... 145
5.4
Synchronized Playback .............................................................................................. 149
5.5
6. Workspace Panes ......................................................................................................... 153
Table of Contents
Table of Contents
April 2023 Latitude, Horizon, Meridian Control Center Help File v
Query Results Pane ................................................................................................... 154
6.1
Clips Pane ................................................................................................................ 157
6.2
Timeline .................................................................................................................... 160
6.3
Lock or Export a Clip .......................................................................................... 1616.3.1
Scrubbing .......................................................................................................... 1626.3.2
Timeline Scale and Viewing Point ......................................................................... 1636.3.3
Export Status Pane ................................................................................................... 165
6.4
Export a Clip ...................................................................................................... 1666.4.1
Export a Clip (Advanced Mode) ............................................................................ 1666.4.2
Advanced Export Settings Dialog .............................................................................................. 167
6.4.2.1
Select a Clip .................................................................................................................................. 169
6.4.2.2
Export a Clip or Partial Clip via the Timeline Pane .................................................. 1716.4.3
Burn a Clip ......................................................................................................... 1736.4.4
View OSD Information in MP4 Exports .................................................................. 1746.4.5
Loop Playback ................................................................................................... 1756.4.6
Privacy Mask Note .............................................................................................. 1756.4.7
Events Pane .............................................................................................................. 175
6.5
Alarms Pane ............................................................................................................. 176
6.6
Display a Camera on Alarm (Automatic and Manual) .............................................. 1806.6.1
7. Cases - CaseBuilder Features ....................................................................................... 183
Building a Case in CaseBuilder Mode .......................................................................... 184
7.1
Adding an Existing Clip to a Case ........................................................................ 1857.1.1
Adding an Existing Clip Bookmark to a Case ........................................................ 1867.1.2
Adding a New Snapshot (on-the-fly) to a Case ....................................................... 1877.1.3
Adding an Existing Alarm to a Case ......................................................................................... 188
7.1.3.1
Adding a Clip Segment to a Case ............................................................................................. 189
7.1.3.2
Adding an Existing Incident to a Case .................................................................. 1907.1.4
Adding a File to a Case (documents, images, exports, etc.) ................................... 1917.1.5
Adding an Existing Snapshot to a Case (Monitor-Tile) ......................................................... 191
7.1.5.1
Adding a URL to a Case ...................................................................................... 1927.1.6
Opening a Saved Case ............................................................................................... 192
7.2
Opening and Viewing an Exported Case ............................................................... 1937.2.1
Exporting a Case ....................................................................................................... 193
7.3
Adding an Exported DVT Clip to a Case ................................................................ 1947.3.1
CaseBuilder Options .................................................................................................. 195
7.4
April 2023
1
Getting Started
Latitude, Horizon, Meridian Control Center Help File
1 Getting Started
Quick Contents
Control Center
About This File
Using Help in Control Center
Log On using Command Line
1.1 Version 9.2.2 Quick Guide to Control Center Skin Changes
Upon Startup, or when you re-populate your layout at any time, go to the View menu,
and use the drop-down menu to choose options in the Default Layout, Viewing Modes,
Content Panes, and Full Screen drop-down menus.
How the Panes and Tabs are positioned
Where did they go?
UVMS 8x
UVMS 9
April 2023
2
Quick Contents
Latitude, Horizon, Meridian Control Center Help File
1.2 Quick Contents
Introduction
Control Center
Quick Contents
About This File
Using Help in Control
Center
Log On using
Command Line
Application Menu
Context Menu
View/Viewing
Mode
Supervisor Mode
Monitor mode
Forensic Mode
CaseBuilder Mode
Access Control
Mode
Tools/Options Menu
Content Display
Video
View Settings
Export
Keyboard
PTZ
Joystick
Audio
CaseBuilder
Login Settings
Favorites
Working With
Keyboards
oControlling the
Control Center via
CCTV Keyboard
oControlling the
Control Center via
the PC Keyboard
oUSB Joystick
Explorer Area -
Navigation Pane
Navigation Tree
Query Pane
PTZ Pane
CaseBuilder Query
Pane
CaseBuilder
Navigation Tree Pane
oPrivacy Mask
Password
Display Area - Viewing
Pane
Layout Tabs
Configuring Layouts
Thumbnail Search
Layout
CaseBuilder Layout
Viewing Tile
Thumbnail Search
Using Draw-to-
zoom with
Thumbnails
Digital Presets
oDefining Digital
Presets
oUsing Digital
Presets
Spot Monitor
Quick View
oQuick View
enabled in a Pane
oUsing Quick View
oQuick View -
further details
oQuick View in
Playback
Adaptive Streaming
Hide/Show Privacy
Mask (Deactivate)
Viewing GIS Maps
Panoramic Cameras
Viewing Live and
Recorded Video from
connected DVRs
Viewing Modes for
Alarms
Synchronized Playback
Workspace Panes
Query Results Pane
Clips Pane
oTimeline
oSelecting a clip
oScrubbing
oTimeline scale and
Viewing point
Export Status Pane
Events Pane
Alarms Pane
Displaying a Camera
on Alarm (Automatic
and Manual)
Cases - CaseBuilder
Features
Building a Case in
CaseBuilder Mode
oAdding an Existing
Clip to a Case
oAdding an Existing
Clip Bookmark to a
Case
Opening a Saved Case
Opening and Viewing
an Exported Case
Exporting a Case
Adding an Exported
DVT Clip to a Case
CaseBuilder Options
April 2023
3
Getting Started
Latitude, Horizon, Meridian Control Center Help File
Exporting a Clip
Loop Playback
oAdding a New
Snapshot (on-the-
fly) to a Case
oAdding an Existing
Alarm to a Case
oAdding a Clip
Segment to a Case
oAdding an Existing
Incident to a Case
oAdding a File to a
Case (documents,
images, exports,
etc.)
oAdding an Existing
Snapshot to a
Case (Monitor-Tile)
oAdding a URL to a
Case
1.3 Control Center
Fig 1 - Control Center General View
The Control Center provides users with a highly customizable platform for viewing live
and recorded video.
Features include:
April 2023
4
Control Center
Latitude, Horizon, Meridian Control Center Help File
Each Control Center enables the user to view up to sixteen live and archived video
sources per monitor, with multiple monitors supported on each workstation.
Full control of content playback with powerful time line controls.
Powerful query capability to assist in locating specific content or identifying recordings
associated with motion events.
Monitor and manage alarms.
With proper hardware and encoders (or IP cameras) video can be viewed at full motion
(30 fps NTSC, 25 fps PAL) 4CIF quality.
Detailed Help information on all facets of the system.
Click here to view details of how to use the Help features.
Other major application features include:
Audio and video independence. Audio inputs and outputs are no longer tied to a video
source. The relationship between the two types of media in the system has been
transformed from one-to-one to many-to-many, giving users the ability to mix audio
sources and link any combination of such sources to multiple camera scenes.
Sequences and Layout tours allowing multiple scenes to be displayed in predefined
sequences and for defined durations.
PTZ Control and Digital Zoom - integrated into a single intuitive interface, which
enables users to easily take advantage of the best available tool without having to
switch windows. Digital and analog PTZ functions can also be controlled directly from
the tile using a mouse with a scroll-wheel.
Multiple-source bookmarking. Bookmarks are now augmented by incidents, a powerful
feature that enables users to associate multiple media sources to a single occurrence
simply by highlighting multiple tiles prior to clicking the bookmark button. The set of
bookmarks created this way constitutes a single incident.
Full alarm management capabilities.
Inter maps. Multiple maps and web pages can now be placed in each site.
Instant replays with or without alternative content arming. The user can choose to allow
instant replay of the buffered video either in the next available tile or only in armed tiles
specified for alternative content. Alternative content tile arming is similar to alarm
arming but used for instant replays. This enables users to determine in advance where
and how the alternative content is displayed.
Workspace customization. The location and size of all workspace areas other than the
Application Menu can be modified.
Simplified and enhanced navigation. All logical entities are now shown in a single
Navigation Tree.
April 2023
5
Getting Started
Latitude, Horizon, Meridian Control Center Help File
1.4 About This File
Welcome to the UVMS 9.2.2 Control Center Help File.
Version 9.2.2 Build 1060
WindowBlinds: DirectSkin™ Stardoc
File information:
Source
file:
Date
complied:
Thursday, April 27, 2023
1.5 Using Help in Control Center
Access the Help file
Click on Help in the Main menu bar to access the Help button.
1.6 Log On using Command Line
The Control Center is normally loaded on the local machine when you click on the
Control Center icon.
When the Control Center does not have a dedicated operator (example, where it operates
purely as a display manager), it may be convenient to start the application and log in
using the Command line.
Note:
The processes described does not work if the Control Center is already running on the
workstation.
Each of the following instances refers to a NEW installation. For systems that have been
upgraded from previous versions, the file path begins:
C:\Program Files (x86)\DVTEL...
Single Directory Control Center Log On
This procedure describes single directory Control Center log on syntax.
Do the following:
From the Command Prompt, enter the following:
"C:\Program Files\FLIR\<%SOFTWAREPREFIX%>\ControlCenter\ControlCenter.exe"
-u="admin" -p="password" -s="server-address"
April 2023
6
Log On using Command Line
Latitude, Horizon, Meridian Control Center Help File
Multiple Directories Control Center Log On
This procedure describes multiple directory Control Center log on syntax.
Where multiple directories are needed, use the Command Prompt to enter all the
addresses of all the required servers:
Do the following:
From the Command Prompt, enter the following:
"C:\Program Files\FLIR\<%SOFTWAREPREFIX%>\ControlCenter\ControlCenter.exe"
-u="admin" -p="password" -s="server-address1 server-address2 server-address3 …"
<RESULT?>
Automatically Run Activities after Log On using Command
Line
This procedure describes how to run a command to open Control Center upon computer
start. You create a task in the Task Scheduler, set a trigger, and create an action with
arguments, and save the task.
Follow these steps:
1. From the UVMS 9.2.2 open Task Scheduler.
2. Create a Task:
a. Enter a task name, navigate to Triggers, and create a new Trigger
b. Choose Begin the task “At startupor At log on
c. (Optional and recommended) – Mark “Delay task for 1 minute” – so the
computer can get ready after startup
d. Click OK to save the trigger).
3. Set Actions:
a. Navigate to Actions, create a new action, and choose the Start a program option
action.
b. Enter the ControlCenter.exe path: (example)
C:\Program Files (x86)\<%SOFTWAREPREFIX%>\ControlCenter\ControlCenter.exe
c. Add arguments:
-u="Username" -p="Password" -s="Server1 Server2 Server3(or substitute
"Encrypted Password" - See below)
d. For a pop-up regarding the text in the arguments, select the No option.
e. Click OK to save the Action, and then click OK to saves the Task.
Log On via the Command Line using Encrypted Password
Cautio
n
When using Command Line Log On, the process text and arguments are readable
to any operator of the target Control Center machine. To prevent exposing the
normal User password, it is recommended to encrypt a password.
April 2023
7
Getting Started
Latitude, Horizon, Meridian Control Center Help File
Follow these steps:
1. From the Command Prompt, enter the following commands:
cd C:\Program Files\FLIR\<%SOFTWAREPREFIX%>\Tools\PasswordEncryptor
and then:
[Application folder].PasswordEncryptor.exe Password
2. Navigate to the following directory:
C:\Program Files\FLIR\[Application folder]\Tools\PasswordEncryptor
The file encrypted.txtcontains your encrypted password
Use Encrypted Password
In the Startup arguments above, use the text in the encrypted.txt file as the password in
the Password argument.
This password text only works for the Command Line Log On. When an operator tries to
use this encrypted password to gain regular access to a client workstation through the
Login screen, it is not accepted.
Command Line Log On Layout Selection
These processes have been created as part of the Multi-Directory Tools which enable the
user to define and run Activities on a Control Center that is started using the Command
Line.
The document "Multi-Directory Tools - User Manual " describes this feature.
April 2023
9
Workspace
Latitude, Horizon, Meridian Control Center Help File
2 Workspace
One of the major Control Center features is that the user can customize the most of the
workspace. Only the menu area at the top of the screen is static -- every other pane can
be moved or hidden. The example below shows a typical layout:
Fig 2 - Control Center General View
The following links provide detailed information on the main components in the Control
Center screen:
Menu Area - Presents these menus: File, View, Tools, Favorites, Help.
Viewing Pane - Displays cameras, sequences, alarms, maps, instant replays and
archived video clips. It is also used to receive and transmit audio. The Layout tabs,
located at the top of the pane, enable the user to access the different available layouts.
Navigation Pane - Browse for logical system entities and display or play them in the
Viewing Pane, or through external output devices (i.e. analog monitors and speakers).
The following panes can be displayed below the Navigation Pane (or can replace it):
oPTZ Pane - Control PTZ cameras/domes and digital zoom.
oQuery Pane - Search for archived scenes based on a scene; date and time; and
recording trigger.
Workspace Pane: This area can contain any of the panes below (but only one at a
time):
oAlarm Pane - Trigger and manage alarms.
oEvents Pane - Display events the user has been configured to receive
April 2023
10
Latitude, Horizon, Meridian Control Center Help File
oTimeline - Displays the active viewing tile's time line and can be used to quickly
browse through a video or audio clip, and export a partial or whole video clip.
oQuery Results - Displays query results and enables users to review them in the
Viewing Pane or via analog monitors.
Other panes that can be opened by clicking on their corresponding icon in the Control
Center screen are as follows:
Navigation Tree is used to create new cases, open exported cases and manage them.
Export Status Pane displays the status of exported clips during their export and after
the export is completed and can be used to stop exports.
File Playback Pane synchronously plays and validates exported clips.
CaseBuilder Query Pane is used to search for cases based on case name, serial
number, the user who created the case or free text.
April 2023
11
Application Menu
Latitude, Horizon, Meridian Control Center Help File
3 Application Menu
The Menu area (Application Menus) is stasis and its size and position remains
unchanged. The Menu area consists of the following menus:
File
View
Tools
Favorites
Help
File
The File menu enables users to do the following:
Manage the system (connect or disconnect from the system, and change password)
Open a DVT file
Lock Application
Exit the application
View
The View menu enables users to do the following:
Show/hide the default audio and video layouts of the viewing pane
Select pre-set viewing modes
Choose panes to display (the viewing pane cannot be hidden)
Enter full screen mode
To view the contents of the viewing mode section, see Viewing Mode
April 2023
12
Latitude, Horizon, Meridian Control Center Help File
Tools
The Tools menu opens the Options window, from which you configure a number of
application settings.
To view the contents of the Options dialog box in detail, see Options Menu.
Favorites
Favorites enables the user to create and save additional custom workspace
configurations to best suit their security environment and maximize operation efficiency.
To view the contents of the viewing mode section, see Favorites.
Help
The Help menu opens the online Help File, and enables the operator to verify if Control
Center software updates are available, and to view the information held in the About
screen.
April 2023
13
Application Menu
Latitude, Horizon, Meridian Control Center Help File
3.1 Context Menu
Right-click on any Control Center viewing tile or on the navigation tree to open a
Context menu.
The Context menu varies depending on the contents of the window from which it was opened.
For example - when watching a Live camera, the context menu displays the Send to Query option so the
user can search for clips from that camera.
When the user is watching a recording, the context menu removes that option, and displays the Switch to
Live option.
Context Menu when playing Live
Context Menu when showing Playback
This is a list of all the Context Menu entries.
Context Menu Item
Comments
Show only this tile/
All tiles
Changes this tile to a single-tile display
April 2023
14
Context Menu
Latitude, Horizon, Meridian Control Center Help File
Context Menu Item
Comments
Take Snapshot
Saves a snapshot of the video from the selected tile in the default export
folder defined in the Tools menu. Snapshots are saved as .png files.
Print Snapshot
Prints a snapshot of the video from the selected tile. See Print Snapshot
Dialog
Note: The 'Export' Privilege must be set in the User/Privileges screen to use
this function.
Lock/Unlock tile
No other content can replace this until the Lock Tile option is deselected.
Show my Location
An open GIS map is repositioned to show this camera in the center of the
view tile. (Requires that GIS location has been stored for a camera and that
you have defined a GIS Map).
Spot monitor
Clicking on Spot Monitor defines this tile to be the destination for any video
opened by double-clicking on a camera in the Navigation tree or a clip in
the Query list.
The Spot Monitor will also be used when video from a remote Control
Center is to be shown.
Note: Only one tile can be set as the Spot Monitor at any one time.
Enter/Exit Full Screen
Displays this tile in full-screen mode. Revert by right-clicking again and
select the Exit Full Screen option, or click the Esc keyboard key.
Remove
Clears this tile.
Properties
Extended OSD information that displays or conceals tile statistics in General
and Advanced tabs.
Note: The Properties option is active only when video content displays in
the tile.
General Tab
The following information displays in the General tab:
Tile Tile name
Tile logical id - Tile assigned logical ID value
Compression Compression type as H264, H265, or MJPEG
Resolution Tile resolution
Frame rate Tile frame display rate
Bit rate Tile bit rate
Zoom level Tile display level
Network type – Tile network type
Note: This parameter displays the CLIENT stream connection type.
Advanced Tab
The following information displays in the Advanced tab:
Archiver name The archiver name
Archiver IP Archiver IP address
Stream source address Stream source address
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204

FLIR Latitude 9.2 User manual

Category
Software
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI