Channel Vision C-1333 User manual

Brand: Channel Vision

Model: C-1333

Type: User manual

Channel Vision Technology will repair or replace any defect in

material or workmanship which occurs during normal use of this

product with new or rebuilt parts, free of charge in the USA, for ten

years from the date of original purchase. This is a no hassle warranty

with no mail in warranty card needed. This warranty does not cover

damages in shipment, failures caused by other products not supplied

by Channel Vision Technology, or failures due to accident, misuse,

abuse, or alteration of the equipment. This warranty is extended only

to the original purchaser, and a purchase receipt, invoice, or other

proof of original purchase date will be required before warranty

repairs are provided.

Mail in service can be obtained during the warranty period by calling

(800) 840-0288 toll free. A Return Authorization number must be

obtained in advance and can be marked on the outside of the shipping

carton.

This warranty gives you specific legal rights and you may have other

rights (which vary from state to state). If a problem with this product

develops during or after the warranty period, please contact Channel

Vision Technology, your dealer or any factory-authorized service

center.

500-154 rev A

C-1333

Security System Phone Line Interface

HANNEL ISION

C-1333

Security interface

The

Unlike many

competitive products that use a spring loaded connector to engage the

interrupt circuit, the C-1333 utilizes a two-position switch slide switch.

This ensures rugged and reliable performance.

C-1333 provides a telephone line interrupt, to allow security systems

to seize the phone line and dial the alarm company.

Features:

Two position slide switch

Add RJ-31X function to any phone distribution system

Easy to instal

Cost effective

Telephone line input

(punchdown connector)

Telephone line output

(punchdown connector)

Note: Use a 110 tool to connect wires to the punchdown

connectors. Using an improper tool will damage the

connectors.

Bypass switch... allows the

phone system to bypass the

security system.

8-pin service jack for security system

connection.

HANNEL ISION

C-1333

Security interface

Telephone line input

Telephone line output

When the service jack is engaged it interrupts the phone line to allow an

alarm panel to seize the telephone line allowing it to call out when there is

an emergency. The security port can be engaged and disengaged by

changing the position of the slide switch located to the right. When this

switch is in the “NORM” position, the security system will be in the circuit.

When this switch is in the “BYP” position, the security system will be

bypassed.

Using the C-1333

Ring

Security

System

Ring

Tip

Pin 1

SERVICE

Pin 8

Tip

HANNEL ISION

C-1333

Security interface

Channel Vision C-1333 User manual

Channel Vision C-1333 User manual

Channel Vision C-1333 User manual

Related papers

Other documents