Bolens 11A-074E065 Quick start guide

Type
Quick start guide

This manual is also suitable for

Read and understand all instruction, warning, and danger labels.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Lea el manual de operación anexo sobre ensamblaje e inicio.
Need Help? Call 1-888-TO-HELP-U (1-888-864-3578)
(A) Remove
retainer clip
from chute
deector.
(B) Lift handle
to extended
position.
(C) Tighten
star knobs.
1
2
Starter
Rope
Blade Control Handle
Star Knobs
Chute
Deector
Handle
Bracket
Tools Required for Assembly: A set
of adjustable wrenches or individual
wrenches of the following sizes:
9/16-inch and 3/4-inch
(a) Hold blade
control handle
against upper
handle.
(B)(C) Slowly
slip starter rope
into rope guide.
(D) Tighten
rope guide wing
knob.
Use cable tie to secure cable to lower handle.
3
4
778-11477
© 200711A-074
B
A
C
A
C
D
B
Align holes in handle bracket with holes in deck.
Secure rear wheels to deck as shown. Be sure to
place cupped side of washer against deck. Secure
front wheels in same manner.
Read and understand all instruction, warning, and danger labels.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Lea el manual de operación anexo sobre ensamblaje e inicio.
Need Help?
Call 1-888-TO-HELP-U
Lea el manual de operación anexo sobre ensamblaje e inicio.
Fill tank with gas to within 1/2-inch of top of tank.
Fill engine with entire contents of oil bottle supplied.
5
6
Push primer ve times.
7
Gas Cap
Oil Fill
Primer
Depress blade control handle and hold.
Pull starter rope with quick, full arm stroke. If engine
does not start after ve pulls, repeat steps 7 through 9.
9
8
  • Page 1 1
  • Page 2 2

Bolens 11A-074E065 Quick start guide

Type
Quick start guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI