Assembly Instructions: 3118-BA2, BA3 (Hines)

IMPORTANT:

• ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.

• SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!

• USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!

PREPARING FOR INSTALLATION

Remove all of the contents from the carton. See the important

notes above. Shut off the power at the circuit breaker and

completelyremovetheoldxturefromthewall,includingthe

spacingoftheholesonyourjunctionboxandonbackplate(G).

Pullthehousewiresthroughthecenterofmountingbracket(B).

Placemountingbracket(B)overthejunctionboxandsecure

mountingbracket(B)tothejunctionboxwithmountingscrews

(D)andascrewdriver.Besurethatthemountingbracketis

level.Tightenthescrewssecurely.

2.Forextrasecurity,useplasticanchors(C)overmounting

screws(C1)tosecuremountingbracket(B)tothewall.

CONNECTING THE WIRES

3.Haveanassistantsupportthexture’sweightwhile

junctionbox,locategroundscrew(E)onthemountingbracket/

mountingstrapandwrapthexture’sgroundwirearoundthe

groundscrew.Useascrewdrivertotightenthetopofground

screw(E)ontothewiresandintothemountingbracket/

mountingstrap.Tuckthewiresintothejunctionbox.

FINISHING THE INSTALLATION

5.Placethexture’sbackplate(F)overmountingscrews(A)so

thatmountingscrews(A)protrudethroughtheholesinthefront

of backplate (F).

6.Threaddeconuts(F)ontomountingscrews(A).

thexture.

For Customer Service, please

contact the place of purchase.

CLEANING TIPS

Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe

down the xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.

How to Identify the Fixture’s Wires

Hot Neutral Ground

Smooth

Ribbed

Bare Metal,

Black Inner

Thread

White Inner

Thread