VANCE HINES 71090 Installation guide

71090
Brand
VANCE HINES
Model
71090
Type
Installation guide

VANCE HINES 71090 is a premium air intake system, expertly engineered to enhance the performance of your motorcycle. Crafted with precision, it integrates seamlessly with your ride, optimizing airflow for exhilarating acceleration and improved throttle response. Experience the thrill of a more responsive, powerful ride, invigorated by the exceptional engineering of VANCE HINES 71090.

VANCE HINES 71090 is a premium air intake system, expertly engineered to enhance the performance of your motorcycle. Crafted with precision, it integrates seamlessly with your ride, optimizing airflow for exhilarating acceleration and improved throttle response. Experience the thrill of a more responsive, powerful ride, invigorated by the exceptional engineering of VANCE HINES 71090.

INSTALLATION INSTRUCTIONS:
SKULLCAP STINGRAY AIR FILTER COVER
VO2 NAKED AIR INTAKE
PART# 71090 / 71091
Page 1 of 4 D1191IN rev 02
Congratulations, you have purchased the nest air intake available for your motorcycle. Your Vance & Hines air intake is
designed and crafted for performance, quality and style. Please follow the instructions below, check air intake kit for missing
or damaged parts and if you need any assistance please contact our technical support line (562) 921-7461.
PARTS LIST
NO. Description Qty.
15/16-18 X 5/8 Button Head 1
2Poly washer 1
3Skullcap Stingray 1
D1191IN rev 02Page 2 of 4
TOOLS REQUIRED
3/16” Allen,
Loctite 243 (blue)
Page 3 of 4
OEM SYSTEM REMOVAL
1. Begin by removing the OE air lter cover. On some models the cap screw may be covered by a vanity
cover. Carefully pull this cover off carefully as it is held on by Velcro.
2. None of the OEM parts will be reused for this installation
V&H AIR INTAKE INSTALLATION
1. For a clear understanding of this installation, it is best to refer to the exploded view diagram while
reading these instructions.
2. When installing or servicing the air cleaner, apply Loctite 243 (blue) to threads of all fasteners.
3. Place the Skullcap (3) cover onto air lter. Make sure Vance and Hines logo is oriented to 3 O’clock.
4. Apply Loctite 243 (blue) to the threads on the 5/16”-18 x 5/8” button head cap screw (1). Insert the
5/16”-18 x 5/8” button head cap (1) screw through the poly washer (2) and skullcap cover hole into
the center of the air lter element: tighten to 50-65 in/lbs..
5. After 100 miles check to be sure that all bolts are still tight. Periodically ensure that these screws remain
tight.
CARE AND MAINTENANCE
1. CHROME COVER. When installing the chrome air lter cover, make sure your hands are clean and free
of oil. After installation, thoroughly clean cover with a soft cloth and cleaning solvent that will leave no
residue (chrome wax / polish, glass cleaner, alcohol, ammonia, etc.) before starting the motorcycle
2. BLACK COVER. When installing the balck air lter cover, make sure your hands are clean and free of
oil. After installation, thoroughly clean cover with warm soapy water and a clean soft cloth, taking
care to not wet the lter element. Dry with clean towel to remove any residue before starting the
motorcycle. DO NOT use anything abrasive to clean cover
D1191IN rev 02
13861 ROSECRANS AVENUE / SANTA FE SPRINGS, CA 90670
SALES: (562) 921-5388
TECHNICAL: (562) 926-5291
FAX: (562) 802-0110
D748IN RevAPage 4 of 4
Emissions Notice:
In California, in order to meet Air Resources Board emissions requirements, certain aftermarket part applications
have been identied as replacements, and others have received ARB Executive Orders. All other emissions related
aftermarket parts are for competition use only. A list of replacement parts and EO parts, and corresponding
tment is provided at vanceandhines.com/california.
Warranty:
All Vance & Hines products are warranted against defects in material and workmanship for a period of 90 days.
This warranty does not cover discoloration or rust. This warranty shall be limited to the repair or replacement of the
product, which may be proven defective under normal use. Vance & Hines will not warranty any system that has
been abused, misused, improperly installed or modied.
Dealers or distributors are not authorized to make dispositions binding upon Vance & Hines. Vance & Hines will
not be responsible for any labor charges incurred in removing or replacing any system under warranty. A return
authorization number and a copy of the original purchase invoice must accompany all returns. Parts returned
without a return authorization may be refused.
For Printing on WHITE ONLY-KNOCKOUT
VERSION-BIZ CARDS
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

VANCE HINES 71090 Installation guide

71090
Brand
VANCE HINES
Model
71090
Type
Installation guide

VANCE HINES 71090 is a premium air intake system, expertly engineered to enhance the performance of your motorcycle. Crafted with precision, it integrates seamlessly with your ride, optimizing airflow for exhilarating acceleration and improved throttle response. Experience the thrill of a more responsive, powerful ride, invigorated by the exceptional engineering of VANCE HINES 71090.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents