IMPORTANT:
• ALLINSTALLATIONWORKSHOULDBEDONEBYACCREDITEDPROFESSIONAL.
• SHUTOFFPOWERSUPPLYATFUSEORCIRCUITBREAKER!
• USEONLYTHESPECIFIEDBULBS.DONOTEXCEEDTHEMAXIMUMWATTAGE!
4.Placethexture’sbackplateovermountingbracket(B)totestthatthexturewillhanglevelwheninstalled.Ifneeded,adjust
mountingbracket(B)toenablethexturetobestraight.Placethexturebodyaside.Securemountingbracket(B)tothewallwith
mountingscrews(L)andascrewdriver.Tightenthescrewssecurely.
CONNECTING THE WIRES
5.Attachthexture’swirestothepowersupplywiresfromthejunctionbox.Connectblacktoblack(orsmooth);whitetowhite(or
ribbed);groundtoground(greenorcopper).Twisttheendsofthewirepairstogether,thentwistonawireconnector.Makesure
alltwistsareinthesamedirection.Ifthereisnogroundwire(greenorcopper)fromthejunctionbox,locategroundscrew(E)on
mountingstrap(B)andwrapthexture’sgroundwirearoundthegreengroundscrew(E).Useascrewdrivertosecuregroundscrew
(E)ontothemountingbracket.Tuckallwiresneatlyintothejunctionbox.
FINISHING THE INSTALLATION
6.Placethexture’sbackplate(F)overmountingbracket(B)sothatmountingscrews(D)protrudethroughtheholesinbackplate(F)
andtwistdecorativenuts(G)ontothethreads.Twistuntilthebackplateofthextureissnugagainstthewall.
7.Slideglassshades(I)overthesockets(H)andsecuretheglassinplacewithsocketrings(J).
Installlightbulbs(notincluded)inaccordancewiththexture’sspecications.Donotexceedthemaximumrecommendedwattage.
Yourinstallationisnowcomplete.Turnonthepowerandtestthexture.
For Customer Service, please
contact the place of purchase.
AssemblyInstructions:2114-BA3 (Cadence)
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the
xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.
PREPARING FOR INSTALLATION
Removeallofthecontentsfromthecarton.Seethe
importantnotesabove.Shutoffthepoweratthecircuit
breakerandcompletelyremovetheoldxturefromthe
wall,includingtheoldmountingstrap.
1.Mountingbracket(B)hasmountingscrews(D)
attached.Youmayneedtotightenthenutsthathold
thescrewsinplace.Mountingbracket(B)contains
severalpairsofthreadedholes.Findthepairofholes
thatmatchesthespacingoftheholesonthejunction
boxandonthexture’sbackplate(F).
2.Pullthehousewiresthroughthecenterofmounting
bracket(B).
3.Securemountingbracket(B)tothejunctionboxwith
mountingscrews(A)andascrewdriver.Tightenthe
screwssecurely.
House Wires
Fixture Wires
Hot
How to Identify the Fixture’s Wires
Hot Neutral Ground
Smooth
Ribbed
Bare Metal,
Green, or
Green Inner
Thread
Black
White
Black Inner
Thread
White Inner
Thread
G
N
D
A
E
D
F
B
C
J
L
K
G
H