Bay Networks 5380 Important information

5380
Bay Networks
Brand
Bay Networks
Model
5380
Type
Important information

This manual is also suitable for

Warning Notice: Model 5380/5580 Net Modules
*114035-A*
Special Notice
System 5000 Net Module Removal Procedure
When you remove a net module from a Model 5380 Ethernet Router or Model 5580 Token Ring
Router, you must lift the module straight up, parallel to the baseboard. Grasp the board close to the
connector using both hands; do not pull the board up from one end. The following illustration
shows the correct and the incorrect way to remove a net module.
Refer to the
Quick Installation and Reference Guide for the System 5000 Net Modules
(Bay Networks part number 112769-A) for information about how to install the net modules.
WARNING:
If you rock the module back and forth or side to side, you can
bend the connector pins. When you attempt to reinstall a net module with bent
connector pins, you can damage the net module and the baseboard.
7202
Incorrect
Correct
  • Page 1 1

Bay Networks 5380 Important information

5380
Bay Networks
Brand
Bay Networks
Model
5380
Type
Important information
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents