Vita CLASSIC Windsor Long Planter Box Installation guide

Type
Installation guide

This manual is also suitable for

1. Pre-Assembled Side Wall Panels
(2)
- 10808
2. Post Caps (4) - 10611
3. Floor Panel (1) -10809
4.
Pre-Assembled Front & Back Wall Panels with Posts Connected
(2) - 10807
General Information
Read Instructions through carefully before beginning assembly.
When assembling components,
place on a non-abrasive surface
(i.e. shipping box) to avoid scratching.
We recommend an area approx 4’x 8’ (1.2 m x 2.4 m) for unobstructed
assembling.
You should not need to use excessive force when assembling components.
The Windsor Long Planter Box
Please read through before starting assembly.
Check Box for These Contents
In the event of missing or defective parts please call our customer service dept. at
1 800 282 9346
(Mon. to Fri. 8:00 AM to 5:00 PM EST).
ASSEMBLY INSTRUCTIONS
1
1
4
3
2
Ver1.5 10262020
11.5 in
29 cm
15.5 in
39 cm
34.75 in
88 cm
41.75 in
106 cm
15.5 in
39 cm
18.38 in
47 cm
www.wearevita.com
The Windsor Long Planter Box
Insert the side wall panels into the routed holes on the
wall panel posts. Push walls until they bottom out inside the post.
The rails are tabbed and will lock into place once inserted.
Align and push the last side wall panel.
3
2
2
2
STEP ONE
Layout one of the front or back wall panel on the work surface.
Connect the Front & Back Wall
to the Side Wall Panels
1
1
Windsor Long Planter Box
3
STEP T WO
Pressure fit the floor panel into place.
Install the four post caps
. Push caps until the locking tabs snap
into place
The Windsor Long Planter Box
Insert Floor Panel & Post Caps
1
2
North America Toll Free Phone: 1 800 282 9346
www.wearevita.com
3
1
2
  • Page 1 1
  • Page 2 2
  • Page 3 3

Vita CLASSIC Windsor Long Planter Box Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI