Julian Bowen CAM012 Assembly Instructions

Type
Assembly Instructions
ASSEMBLY
INSTRUCTIONS DESK
Approximate Assembly Time
Before you start.
Please carefully unpack and lay out all of the component parts to ensure nothing
is missing and to check each component for any obvious damage.
Should you identify any concerns at this stage please contact the retailer from
whom this product was purchased. Please quote your order number, details of
your issue, the product code, and the batch number from the cartons which will
help to resolve your issue as quickly as possible.
Version Number - 1.0 Product Code - CAM012
People Required to Assembly Tools Required
1:00hrs
430mm
02
6x30mm
A
M
DF
HJK
I
G
06x
07x
E
C
L
N
04x 4x30mm 02x
02x
01x
02x
16x
4x25mm
8x8mm 150x15mm
30x30mm 45x35mm 3,5x16mm
B
08x 21x
8x30mm
26x
15x11mm
3,5x16mm
O P
26x
Q
02x
6,5x35mm 88x20mm
02x
4x30mm 02x
4x25mm
01x
8x30mm
01x
15x11mm
Please check all hardware matches the list below. Should
you notice any are missing please contact your retailer.
We strongly advise that you do not use Power Tools, such as
drills or electric screwdrivers during the assembly as this
may cause irreparable damage and will invalidate your
warranty.
03
Please ensure you carefully check all the pieces, should you have any
concerns please contact the retailer before assembly commences.
Please have your order number, details of the issue, the product code,
and the batch number from the cartons as this will help us to resolve
your issue much faster. 04
02
14
08
04
16
06
07
05
17
01
03
15
13
11 12
09
10
ASSEMBLY ADVICE
Please take the time to carefully read through these instructions
before you commence.
Keep these instructions for future reference.
We advise that the product is assembled in the room it is intended for.
We advise that you keep the hardware in a bowl during assembly to
avoid losing anything.
We strongly recommend that you keep children away from the work
area.
Small component parts could choke a child if swallowed.
We recommend you use a sheet or blanket to protect both floor and
product through the assembly stages.
This product is heavy, and we recommend a 2 person lift to avoid
personal injury or damage to the product.
Never push or pull the product as this could cause both personal injury
or irreparable damage to product or floor.
We have tried to make this piece of furniture easy to assemble if the
instructions are followed carefully.
In the unlikely event that you have problems with assembling the
product or have missing or damaged parts, please contact your
retailer and we will assist them in rectifying the problem as quickly as
possible.
Please remember we strongly urge you DO NOT use power tools such
as drill or electric screwdrivers as this could cause irreparable
damage to your product and will invalidate your warranty
05
06
1
P22x
22x
C
N
O
D
21x
02
06
08
14
16
15
01
O
J
B
2x
L
03
05
07
06
2
3
06
02
05
07
08
14
07
4
5
01
15
16
08
6
7
03
F
F
09
04
04
04
G
8
10
M
09
E
12
10
13
09
12
P
4x
4x
CA
4x
11
10
9
E
11 12
10
E
E
E
11
13
17
I
O
B
K
2x
2x
14
17
M
E
12
15
13
H
O
16
2x
14
Use as necessary
2x
Q
17
15
ADDITIONAL SAFETY INFORMATION
WARNING: In order to prevent overturning the wall attachment
must be used with this product.
In the interest of safety, particularly where small children are
concerned, we advise securing your furniture to the wall to prevent the
product tipping forward when loaded.
This product is heavy and could cause serious or fatal injury if not
used or moved correctly.
The screw included in the fitting pack is only intended for fixing the
safety strap to the piece of furniture.
Hardware to attach the strap/s to the wall are NOT INCLUDED. Use
fixing devices suitable for the walls in your home (not included). If you
are unsure what type of fixings to use, please seek further advice from
your local DIY store.
GENERAL CARE & MAINTENANCE
We advise that when cleaning the product that a damp cloth is used.
Avoid the use of all household cleaners and abrasive.
Never push or drag the furniture.
Never attempt to move the furniture when fully loaded.
We advise that periodically all fixings are re-tightened.
16
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Julian Bowen CAM012 Assembly Instructions

Type
Assembly Instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI