Paradyne 7110 Safety Notice

June 1998

** SAFETY NOTICE **

Model 7110-A1-001 T1 DSU/CSU

Paradyne warrants that this Model 7110-A1-001 T1 DSU/CSU meets

the applicable safety requirements, when supplied with a power

transformer that meets Paradyne part specification 327-0123-0031.

This specification specifically calls for an input voltage of 230 Vac at

50/60 Hz with an unregulated 15 Vdc 800 ma output. Connection to the

unit must be via a female barrel connector of dimensions 2.1 mm X

5.5 mm X 9.5 mm.



*7110–A2–GX40–00*

This manual is also suitable for