American Standard Cadet 5023.100 Features & Dimensions

Brand: American Standard

Model: Cadet 5023.100

Type: Features & Dimensions

CADET

BIDET

VITREOUS CHINA

To Be Specied:

❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Silver

❏ Fawn Beige ❏ Black

❏ Bidet Fitting*:

❏ Fitting Finish:

❏ Trap:

❏ Supplies with Stops:

* See faucet section for additional models available

NOTES:

DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES

ARE SUGGESTED.

“P” TRAP AND FITTINGS NOT FURNISHED WITH BIDET AND

MUST BE ORDERED SEPARATELY. BIDET FITTING HAS

TRANSFER VALVE FEATURE.

PROVISIONS MUST BE MADE FOR THE INSTALLATION OF TRAP

IN FLOOR.

● REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH

BIDET AND FITTING FOR ADDITIONAL INFORMATION.

IMPORTANT: Dimensions of xtures are nominal and may vary within

the range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation.

No responsibility is assumed for use of superseded or voided leaet.

654mm

(25-3/4")

368mm

(14-1/2")

FINISHED

FLOOR

203mm

(8")

FINISHED

WALL

64mm

(2-1/2")

1-1/4 O.D. TAILPIECE

SUPPLIES

AS REQ'D

229mm

(9")

COUPLING NUT

ON FITTING

133mm

(5-1/4")

102mm

(4")

102mm

(4")

381 mm

(15")

121mm

(4-3/4")

159mm

(6-1/4")

64mm

(2-1/2")

MIN.

64mm

(2-1/2")

MIN.

C/L HOT & COLD SUPPLY INLETS

C/L OF OUTLET

C/L OF SPRAY

127mm

(5")

108mm

(4-1/4")

VACUUM

BREAKER

●

C/L (2) 13mm (1/2") DIA. HOLES

ON 203mm (8") CENTERS

CADET

BIDET

❑ 5023.100 For deck-mounted tting

•Vitreouschina

•Flushingrimandverticalcleansingspray

•Integraloverow

•Twoboltcaps

Shown with 7391.723 Hampton Bidet Fitting

with metal cross handles (not included)

Nominal Dimensions:

654 x 381 x 368mm

(25-3/4" x 15" x 14-1/2")

Compliance Certications -

Meets or Exceeds the Following Specications:

•ASMEA112.19.2MforVitreousChinaFixtures

Revised 5/12

American Standard Cadet 5023.100 Features & Dimensions

American Standard Cadet 5023.100 Features & Dimensions

American Standard Cadet 5023.100 Features & Dimensions

Related papers

Other documents