American Standard Cadet 5023.100 User manual

Brand: American Standard

Model: Cadet 5023.100

Type: User manual

CADET™ BIDET

VITREOUS CHINA

To Be Specied:

❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Silver

❏ Fawn Beige ❏ Black

❏ Bidet Fitting*:

❏ Fitting Finish:

❏ Trap:

❏ Supplies with Stops:

* See faucet section for additional models available

NOTES:

DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES ARE

SUGGESTED.

“P” TRAP AND FITTINGS NOT FURNISHED WITH BIDET AND MUST

BE ORDERED SEPARATELY. BIDET FITTING HAS TRANSFER VALVE

FEATURE.

PROVISIONS MUST BE MADE FOR THE INSTALLATION OF TRAP IN

FLOOR.

● REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH BIDET

AND FITTING FOR ADDITIONAL INFORMATION.

IMPORTANT: Dimensions of xtures are nominal and may vary within the

range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No

responsibility is assumed for use of superseded or voided leaet.

654mm

(25-3/4)

368mm

(14-1/2)

FINISHED

FLOOR

203mm

(8)

FINISHED

WALL

64mm

(2-1/2)

C/L (2) 13mm (1/2) DIA. HOLES

ON 191mm (7-1/2) CENTERS

1-1/4 O.D. TAILPIECE

SUPPLIES

AS REQ'D

229mm

(9)

COUPLING NUT

ON FITTING

133mm

(5-1/4)

102mm

(4)

102mm

(4)

381 mm

(15)

121mm

(4-3/4)

159mm

(6-1/4)

64mm

(2-1/2)

MIN.

64mm

(2-1/2)

MIN.

C/L HOT & COLD SUPPLY INLETS

C/L OF OUTLET

C/L OF SPRAY

127mm

(5)

108mm

(4-1/4)

VACUUM

BREAKER

●

CADET™ BIDET

❑ 5023.100 For deck-mounted tting

• Vitreous china

• Flushing rim and vertical cleansing spray

• Integral overow

• Two bolt caps

Shown with 7391.723 Hampton Bidet Fitting

with metal cross handles (not included)

Nominal Dimensions:

654 x 381 x 368mm

(25-3/4" x 15" x 14-1/2")

Compliance Certications -

Meets or Exceeds the Following Specications:

• ASME A112.19.2M for Vitreous China Fixtures

Revised 2/08

American Standard Cadet 5023.100 User manual

American Standard Cadet 5023.100 User manual

American Standard Cadet 5023.100 User manual

Related papers

Other documents