2. American Standard
  3. Traditional Bidet 5065.010

American Standard Traditional Bidet 5065.010, 5065.040 User manual

  • Hello! I am an AI chatbot trained to assist you with the American Standard Traditional Bidet 5065.010 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
K5
© 2008 AS America Inc.
TRADITIONAL BIDET
VITREOUS CHINA
TRADITIONAL BIDET
❑ 5065.040 For deck-mounted tting (illustrated)
• Vitreous china
• Flushing rim and vertical cleansing spray
• Design matched to Reminiscence and
Eneld toilets
• Two bolt caps
• Integral overow
Shown with 8391.000 Amarilis bidet tting with
0000.452 Jasmine metal cross handles
(not included)
❑ 5065.010 For over-the-rim tting
• Vitreous china
• Punched for single hole, over-the-rim tting,
less ushing rim and spray
• Design matched to Reminiscence and
Eneld toilets
• Integral overow
• Two bolt caps
Nominal Dimensions:
600 x 406 x 394mm
(26" x 16" x 15-1/2")
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures
Revised 2/08
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Silver
❏ Fawn Beige ❏ Black
❏ Bidet Fitting*:
❏ Fitting Finish:
❏ Trap:
❏ Supplies with Stops:
* See faucet section for additional models available
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES ARE SUGGESTED.
▲ WALL OUTLET INSTALLATION REQUIRES:
- A TRUE 1-1/4" BODIED “P” TRAP,; DO NOT USE A UNIVERSAL 1-1/4 X
1-1/2" TRAP.
- WALL OUTLET INSTALLATION.
- DRAIN TAILPIECE MUST BE CUT TO 1-1/2" LENGTH FOR WALL
OUTLET CONNECTION.
■ THRU-FLOOR OUTLET INSTALLATION (ALTERNATE).
“P” TRAP AND FITTINGS NOT FURNISHED WITH BIDET AND MUST BE
ORDERED SEPARATELY. BIDET FITTING HAS TRANSFER VALVE FEATURE.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided leaet.
660mm
(26)
413mm
(16-1/4)
*
76mm (3)
76mm (3)
102mm
(4)
178mm
(7)
140mm
(5-1/2)
394mm
(15-1/2)
178mm
(7)
3/8 FLEX C.W.T.
SUPPLIES FROM
FITTING
1-1/4 O.D. TAILPIECE
(FOR THRU FLOOR
TRAPPING ONLY)
1-1/4 O.D. TAILPIECE
(FOR WALL DRAIN
OUTLET ONLY)
1-1/4 O.D. WASTE OUTLET
3/8 N.P.T.
SUPPLIES
C/L OF BIDET
406mm
(16)
FOOT
OUTLINE
OFFSET
WASTE
C/L
268mm
(10-1/2)
127mm
(5)
76mm
(3) MIN.
29mm
(1-1/8)
286mm
(11-1/4)
VIEW "A" - "A" (WALL SUPPLIES/OUTLET DETAIL)
29mm (1-1/8) OFFSET
"A"
"A"
FINISHED
WALL
FINISHED
FLOOR
FINISHED
FLOOR
1-3/4 DIA.
DRAIN OUTLET
165mm
(6-1/2)
OVERFLOW
10mm (3/8) DIA.
MTG. HOLES (2) ON
178mm (7) CTRS
203mm
(8)
SPRAY
102mm
(4)
/