2. BD
  3. CSampler

BD CSampler Installation guide

  • Hello! I am an AI chatbot trained to assist you with the BD CSampler Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1. ShutdowntheBDAccuriC6.
2. UnscrewtheBDAccuriC6SIPcollar,removethesamplestageandinstalltheLow-ProleBDCSamplerSIPcollar(Figures
1-3).Thelow-proleBDCSamplerSIPcollarensuresthatcollisionsdonotoccurduringoperationoftheBDCSampler.
Figure1
Figure2 Figure3
BD CSampler™ Installation Guide
BD CSampler Accessory Kit
Shipping Contents
• BDCSamplerModule
• BDCSamplerMat
• MountingBolts(3)
• InstallationandRemovalTool
• BDCSamplerSIPCollar
• BDCSamplerSoftwareCD
(notshown)
• 24-tuberack(notshown)
Install and validate the BD Accuri
™
C6 Flow Cytometer
with 6- and 8-peak beads prior to installing the BD
CSampler.InspecttheBDCSamplerAccessoryKitcontentstoensuredeliveryofallcomponents.
BDCSamplerAccessoryKit
BDCSampler
Module
Mat
Tool
BDCSampler
SIPCollar
Bolts
WARNING Failuretoshut
downtheBDAccuriC6duringBD
CSamplerinstallationcouldresultin
damagetoeitherorbothelectronic
modules.
Low-ProleBDCSampler
SIPcollar
BDC6SIPcollar
www.AccuriCytometers.comForResearchUseOnly.Notforuseindiagnosticprocedures.Class1LaserProduct7820020Rev-3
BD CSampler™ Installation Guide
5. AlignthefrontoftheBDCSamplersothattheholesonthemodulearelinedupwiththethreethreadedholesintheBD
AccuriC6.HoldthemodulewithonehandandscrewinthefrontrightmountingbolttosecuretheBDCSamplertotheBD
AccuriC6,tighteningwiththetoolprovided(Figure6).
6. Screwintheothertwomountingbolts.WARNINGDonotovertighten(Figure7).
Figure7
Figure8
Figure9
Figure10
Figure4 Figure5
Figure6
Tab
Holes
8. Placethematinposition(Figure10).WARNINGFailuretokeepthematclearof
plates,tubesoranyothermaterialsmayresultindamagetotheBDCSampler.
9. InstallBDCSamplersoftware.
10. TurnontheBDAccuriC6.
11. Runvalidationbeadstoensurecorrectoperation.RefertoBDAccuriC6Software
UserGuide,Chapter1.
3. OpenthelidoftheBDAccuriC6andlocatetheholesusedtomounttheBDCSampler(Figure4).
4. HoldtheBDCSamplermodulewithbothhandsandlocatethetabintheslotonthebackoftheBDAccuriC6(Figure5).
7. ConnectthecabletothesocketatthebackoftheBDAccuriC6andswitchontheBDAccuriC6.TheBDCSamplerwillauto-
maticallyalignitselfandthenremaininthehomeposition(Figure8-9).
www.AccuriCytometers.comForResearchUseOnly.Notforuseindiagnosticprocedures.Class1LaserProduct7820020Rev-3
/