TANDBERG Network Router 6213 User manual

Type
User manual

This manual is also suitable for

TANDBERG Network Router 6213 is a multi-function gateway that provides a range of connectivity options for small and medium-sized businesses. With its four ISDN PRI interfaces, the 6213 can be used to connect to ISDN networks, providing voice and data services. Additionally, the 6213 has two Ethernet/LAN interfaces, allowing it to be connected to a local area network (LAN). This makes it possible to share resources such as files, printers, and Internet access across the network. The 6213 also has a built-in RS-232 serial port, which can be used to connect to a PC or other serial device.

TANDBERG Network Router 6213 is a multi-function gateway that provides a range of connectivity options for small and medium-sized businesses. With its four ISDN PRI interfaces, the 6213 can be used to connect to ISDN networks, providing voice and data services. Additionally, the 6213 has two Ethernet/LAN interfaces, allowing it to be connected to a local area network (LAN). This makes it possible to share resources such as files, printers, and Internet access across the network. The 6213 also has a built-in RS-232 serial port, which can be used to connect to a PC or other serial device.

D13180 Rev. 01
RS 232
PRI 4
PRI 3
PRI 2
PRI 1
LAN 1
Power
LAN 1 LAN 2
P
R
I 1 P
R
I 2
P
R
I 3
P
R
I 4
R
S
2
3
2
o
I
GW
Installation
Unpacking
Four ISDN Cables
Ethernet/LAN Cable
Power Cable
Serial Cable (RS 232)
Screwdriver
Accessories
Connecting Cables
Bracket Mounting
User Manual (on CD)
Gateway
GW
1. Connect the RS232 cable between the gateway and a PC and then switch on the gateway.
2. Start a terminal program on the PC and configure it to: 9600, 8, 1, None.
3a. To assign a static IP-address, type ‘ipassign static’ and ‘ipaddress <static IP-address>’.
3b. To assign an IP Subnetmask, type ‘ipaddress subnetmask <subnetmask>’.
3c. To assign an IP Gateway address, type ‘ipaddress gateway <gateway IP-address>’.
4. Restart the gateway.
Front Panel
Rear Panel
Configuration
TIP
DHCP ASSIGNED IP-ADDRESSES ARE SUPPORTED BY THE TANDBERG GATEWAY (FACTORY DEFAULT).
5. Start a WEB browser and enter the IP-address of the gateway. Default password: ‘TANDBERG’.
6. To configure the gateway for ISDN dial in, enter PRI numbers and dial in number(s). For details,
see the ‘PRI Configuration’ and the ‘ISDN Dial in configuration’ section in the User Manual.
7. To configure the gateway for IP dial in, enter H.323 services and register the gateway to a
gatekeeper. For details, see ‘H.323 Services’ and ‘H.323 Configuration’ in the User Manual.
I
o
LAN 1 LAN 2 PRI 1 PRI 2 PRI 3 PRI 4 RS 232
G
reen:
Layer 1 O
K
Red:
D-Channel Down
Red:
Layer 1 Red Alarm
Yellow
: Layer 1 Yellow Alarm
G
reen:
Layer 1 O
K
Red:
D-Channel Down
Red:
Layer 1 Red Alarm
Yellow
: Layer 1 Yellow Alarm
G
reen:
Layer 1 O
K
Red:
D-Channel Down
Red:
Layer 1 Red Alarm
Yellow
: Layer 1 Yellow Alarm
G
reen:
Layer 1 O
K
Red:
D-Channel Down
Red:
Layer 1 Red Alarm
Yellow
: Layer 1 Yellow Alarm
Green:
Tx
G
reen:
Rx
Green:
Tx
G
reen:
Rx
Green:
Not in use
G
reen:
Pow
er on
G
reen:
Not in use
Green:
Not in use
GW
  • Page 1 1
  • Page 2 2

TANDBERG Network Router 6213 User manual

Type
User manual
This manual is also suitable for

TANDBERG Network Router 6213 is a multi-function gateway that provides a range of connectivity options for small and medium-sized businesses. With its four ISDN PRI interfaces, the 6213 can be used to connect to ISDN networks, providing voice and data services. Additionally, the 6213 has two Ethernet/LAN interfaces, allowing it to be connected to a local area network (LAN). This makes it possible to share resources such as files, printers, and Internet access across the network. The 6213 also has a built-in RS-232 serial port, which can be used to connect to a PC or other serial device.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI