2. Legrand
  3. Satellite Surge Protector, IS-0285

Legrand Satellite Surge Protector, IS-0285 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Legrand Satellite Surge Protector, IS-0285 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
INSTRUCTION/INSTALLATION SHEET
SATELLITE SURGE SUPPRESSOR IS-0285 REV.O
1. Introduction
On-Q Home offers a Satellite Surge Suppressor, P/N
364746-01, (see Figure 1), which protects the home’s
satellite products from voltage spikes. It can be mounted on
the On-Q Home RF Coax Conditioning Module, P/N
364679-01, or placed in-line on a coaxial satellite feed.
2. Description
The On-Q Home Satellite Surge Suppressor features non-
degrading performance over time, low (65V) clamping
voltage, 500 Ampere surge capability and no voltage
overshoot. Its response time is 1 nano-second and it is self
resetting. Both ends of the Satellite Surge Suppressor c
female “F” style connectors. One female end can be
unscrewed to expose a male “F” style connector.
ontain
Figure 1
RF Coax Conditioning
Module
Specifications:
Frequency Range……………5 – 2150 MHz Current Suppression………..500 amps (2x10 usec)
Response Time……………..1 nsec Insertion Loss……………….1 dB max
Firing Voltage………………65 Volts Return Loss………………… >20dB
RFI Shielding………………120 dB
Satellite Surge Suppressor
3. Installation
Note: If applicable, refer to IS-0232 for specific installation instructions concerning the RF Coax Conditioning Module.
A. Secure the Satellite Surge Suppressor to the RF Coax Conditioning Module mounting tab using the provided retaining
hex nut, if applicable (as shown in Figure 1).
B. Attach satellite feed cable to the Satellite Surge Suppressor.
C. Connect other end of Satellite Surge Suppressor to the satellite inputs on the 2x6 Enhanced Video Module, P/N 363468-02,
3x8 Enhanced Video Module, P/N 363469-02, Digital Satellite Multi Switch, P/N 364228-01, Advanced 5x8 4 LNB
Multiswitch, P/N 364701-01, or the DBS Upgrade Kit, P/N 364484-02.
Note: Plan installation such that cable bends are
not less than 2 inch radii for RG6 Quad Shield Coaxial Cable. We
recommend the use of On-Q Home Mini Coax Jumper cables between modules, P/N 364597-xx.
Page 1 of 1
301 Fulling Mill Road, Suite G ©Copyright 2004 by OnQ Technologies, Inc All Rights Reserved.
Middletown, PA 17057 www.onqhome.com
(800)-321-2343
Innovations in Home Living.
/