Extron XTP SR HDMI User manual

XTP SR HDMI
Extron
Brand
Extron
Model
XTP SR HDMI
Category
Video switches
Type
User manual
User Guide
XTP SR HDMI
XTP Systems
XTP HDMI Scaling Receiver
68-2007-01 Rev. H
01
19
Safety Instructions
Safety Instructions • English
WARNING: This symbol, ,when used on the product, is
intended to alert the user of the presence of uninsulated dangerous
voltage within the product’s enclosure that may present a risk of electric
shock.
ATTENTION: This symbol, , when used on the product, is intended
to alert the user of important operating and maintenance (servicing)
instructions in the literature provided with the equipment.
For information on safety guidelines, regulatory compliances, EMI/EMF
compatibility, accessibility, and related topics, see the Extron Safety and
Regulatory Compliance Guide, part number 68-290-01, on the Extron
website, www.extron.com.
Sicherheitsanweisungen • Deutsch
WARNUNG: Dieses Symbol auf dem Produkt soll den Benutzer
darauf aufmerksam machen, dass im Inneren des Gehäuses dieses
Produktes gefährliche Spannungen herrschen, die nicht isoliert sind und
die einen elektrischen Schlag verursachen können.
VORSICHT: Dieses Symbol auf dem Produkt soll dem Benutzer in
der im Lieferumfang enthaltenen Dokumentation besonders wichtige
Hinweise zur Bedienung und Wartung (Instandhaltung) geben.
Weitere Informationen über die Sicherheitsrichtlinien, Produkthandhabung,
EMI/EMF-Kompatibilität, Zugänglichkeit und verwandte Themen finden Sie in
den Extron-Richtlinien für Sicherheit und Handhabung (Artikelnummer
68-290-01) auf der Extron-Website, www.extron.com.
Instrucciones de seguridad • Español
ADVERTENCIA: Este símbolo, , cuando se utiliza en el producto,
avisa al usuario de la presencia de voltaje peligroso sin aislar dentro del
producto, lo que puede representar un riesgo de descarga eléctrica.
ATENCIÓN: Este símbolo, , cuando se utiliza en el producto, avisa
al usuario de la presencia de importantes instrucciones de uso y
mantenimiento recogidas en la documentación proporcionada con el
equipo.
Para obtener información sobre directrices de seguridad, cumplimiento
de normativas, compatibilidad electromagnética, accesibilidad y temas
relacionados, consulte la Guía de cumplimiento de normativas y seguridad
de Extron, referencia 68-290-01, en el sitio Web de Extron, www.extron.com.
Instructions de sécurité • Français
AVERTISSEMENT : Ce pictogramme, , lorsqu’il est utilisé sur le
produit, signale à l’utilisateur la présence à l’intérieur du boîtier du
produit d’une tension électrique dangereuse susceptible de provoquer
un choc électrique.
ATTENTION : Ce pictogramme, , lorsqu’il est utilisé sur le produit,
signale à l’utilisateur des instructions d’utilisation ou de maintenance
importantes qui se trouvent dans la documentation fournie avec le
matériel.
Pour en savoir plus sur les règles de sécurité, la conformité à la
réglementation, la compatibilité EMI/EMF, l’accessibilité, et autres sujets
connexes, lisez les informations de sécurité et de conformité Extron, réf.
68-290-01, sur le site Extron, www.extron.com.
Istruzioni di sicurezza • Italiano
AVVERTENZA: Il simbolo, , se usato sul prodotto, serve ad
avvertire l’utente della presenza di tensione non isolata pericolosa
all’interno del contenitore del prodotto che può costituire un rischio di
scosse elettriche.
ATTENTZIONE: Il simbolo, , se usato sul prodotto, serve ad
avvertire l’utente della presenza di importanti istruzioni di funzionamento
e manutenzione nella documentazione fornita con l’apparecchio.
Per informazioni su parametri di sicurezza, conformità alle normative,
compatibilità EMI/EMF, accessibilità e argomenti simili, fare riferimento
alla Guida alla conformità normativa e di sicurezza di Extron, cod. articolo
68-290-01, sul sito web di Extron, www.extron.com.
Instrukcje bezpieczeństwa • Polska
OSTRZEŻENIE: Ten symbol, , gdy używany na produkt, ma na celu
poinformować użytkownika o obecności izolowanego i niebezpiecznego
napięcia wewnątrz obudowy produktu, który może stanowić zagrożenie
porażenia prądem elektrycznym.
UWAGI: Ten symbol, , gdy używany na produkt, jest przeznaczony do
ostrzegania użytkownika ważne operacyjne oraz instrukcje konserwacji
(obsługi) w literaturze, wyposażone w sprzęt.
Informacji na temat wytycznych w sprawie bezpieczeństwa, regulacji
wzajemnej zgodności, zgodność EMI/EMF, dostępności i Tematy pokrewne,
zobacz Extron bezpieczeństwa i regulacyjnego zgodności przewodnik, część
numer 68-290-01, na stronie internetowej Extron, www.extron.com.
Инструкция по технике безопасности • Русский
ПРЕДУПРЕЖДЕНИЕ: Данный символ, , если указан
на продукте, предупреждает пользователя о наличии
неизолированного опасного напряжения внутри корпуса
продукта, которое может привести к поражению электрическим
током.
ВНИМАНИЕ: Данный символ, , если указан на продукте,
предупреждает пользователя о наличии важных инструкций
по эксплуатации и обслуживанию в руководстве,
прилагаемом к данному оборудованию.
Для получения информации о правилах техники безопасности,
соблюдении нормативных требований, электромагнитной
совместимости (ЭМП/ЭДС), возможности доступа и других
вопросах см. руководство по безопасности и соблюдению
нормативных требований Extron на сайте Extron: ,
www.extron.com, номер по каталогу - 68-290-01.
安全说明 • 简体中文
警告： 产品上的这个标志意在警告用户该产品机壳内有暴露的危险 电压，
有触电危险。
注意： 产品上的这个标志意在提示用户设备随附的用户手册中有
重要的操作和维护(维修）说明。
关于我们产品的安全指南、遵循的规范、EMI/EMF 的兼容性、无障碍
使用的特性等相关内容，敬请访问 Extron 网站 , www.extron.com，参见
Extron 安全规范指南，产品编号 68-290-01。
안전 지침 • 한국어
경고: 이 기호 가 제품에 사용될 경우, 제품의 인클로저 내에 있는
접지되지 않은 위험한 전류로 인해 사용자가 감전될 위험이 있음을
경고합니다.
주의: 이 기호 가 제품에 사용될 경우, 장비와 함께 제공된 책자에 나와
있는 주요 운영 및 유지보수(정비) 지침을 경고합니다.
안전 가이드라인, 규제 준수, EMI/EMF 호환성, 접근성, 그리고 관련 항목에
대한 자세한 내용은 Extron 웹 사이트(www.extron.com)의 Extron 안전 및
규제 준수 안내서, 68-290-01 조항을 참조하십시오.
安全記事 • 繁體中文
警告: 若產品上使用此符號，是為了提醒使用者，產品機殼內存在著
可能會導致觸電之風險的未絕緣危險電壓。
注意 若產品上使用此符號，是為了提醒使用者，設備隨附的用戶手冊中有
重要的操作和維護（維修）説明。
有關安全性指導方針、法規遵守、EMI/EMF 相容性、存取範圍和相關主題的詳細資
訊，請瀏覽 Extron 網站：www.extron.com，然後參閱《Extron 安全性與法規
遵守手冊》，準則編號 68-290-01。
安全上のご注意 • 日本語
警告: この記号 が製品上に表示されている場合は、筐体内に絶縁されて
いない高電圧が流れ、感電の危険があることを示しています。
注意:この記号 が製品上に表示されている場合は、本機の取扱説明書に
記載されている重要な操作と保守(整備)の指示についてユーザーの注意
を喚起するものです。
安全上のご注意、法規厳守、EMI/EMF適合性、その他の関連項目に
つ い て は 、エ ク スト ロ ン の ウ ェブ サ イト www.extron.com よ り 『 Extron Safety
and Regulatory Compliance Guide』 ( P/N 68-290-01) をご覧ください。
Copyright
© 2013-201
9 Extron Electronics. All rights reserved. www.extron.com
Trademarks
All trademarks mentioned in this guide are the properties of their respective owners.
The following registered trademarks (
®
), registered service marks (
SM
), and trademarks (
TM
) are the property of RGBSystems, Inc. or
ExtronElectronics (see the current list of trademarks on the Terms of Use page at www.extron.com):
Registered Trademarks
(
®
)
Extron, Cable Cubby, ControlScript, CrossPoint, DTP, eBUS, EDID Manager, EDID Minder, Flat Field, FlexOS, Glitch Free. Global
Configurator, GlobalScripter, GlobalViewer, Hideaway, HyperLane, IPIntercom, IPLink, KeyMinder, LinkLicense, LockIt, MediaLink,
MediaPort, NetPA, PlenumVault, PoleVault, PowerCage, PURE3, Quantum, Show Me, SoundField, SpeedMount, SpeedSwitch,
StudioStation, SystemINTEGRATOR, TeamWork, TouchLink, V-Lock, VideoLounge, VN-Matrix, VoiceLift, WallVault, WindoWall, XTP,
XTPSystems, and ZipClip
Registered Service Mark
(SM)
: S3 Service Support Solutions
Trademarks
(
™
)
AAP, AFL (Accu-RateFrameLock), ADSP(Advanced Digital Sync Processing), Auto-Image, CableCover, CDRS(ClassD Ripple
Suppression), Codec Connect, DDSP(Digital Display Sync Processing), DMI (DynamicMotionInterpolation), DriverConfigurator,
DSPConfigurator, DSVP(Digital Sync Validation Processing), eLink, EQIP, Everlast, FastBite, FOX, FOXBOX, IP Intercom HelpDesk,
MAAP, MicroDigital, Opti-Torque, PendantConnect, ProDSP, QS-FPC(QuickSwitch Front Panel Controller), RoomAgent, Scope-Trigger,
ShareLink, SIS, SimpleInstructionSet, Skew-Free, SpeedNav, Triple-Action Switching, True4K, Vector™ 4K , WebShare, XTRA, and
ZipCaddy
FCC Class A Notice
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part15 of the FCC rules. The ClassA limits provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause interference. This interference must be corrected at the expense of the user.
ATTENTION: The Twisted Pair Extension technology works with unshielded twisted
pair (UTP) or shielded twisted pair (STP) cables; but to ensure FCC Class A and CE
compliance, STP cables and STP Connectors are required.
For more information on safety guidelines, regulatory compliances, EMI/EMF
compatibility, accessibility, and related topics, see the “Extron Safety and Regulatory
Compliance Guide” on the Extron website.
Conventions Used in this Guide
Notifications
The following notifications are used in this guide:
WARNING: Potential risk of severe injury or death.
AVERTISSEMENT : Risque potentiel de blessure grave ou de mort.
ATTENTION:
• Risk of property damage.
• Risque de dommages matériels.
NOTE: A note draws attention to important information.
TIP: A tip provides a suggestion to make working with the application easier.
Software Commands
Commands are written in the fonts shown here:
^AR Merge Scene,,Op1 scene 1,1 ^B 51 ^W^C
[01] R 0004 00300 00400 00800 00600 [02] 35 [17] [03]
EX!*X1&*X2)*X2#*X2!CE}
NOTE: For commands and examples of computer or device responses mentioned
in this guide, the character “0” is used for the number zero and “O” represents the
capital letter “o.”
Computer responses and directory paths that do not have variables are written in the font
shown here:
Reply from 208.132.180.48: bytes=32 times=2ms TTL=32
C:\Program Files\Extron
Variables are written in slanted form as shown here:
ping xxx.xxx.xxx.xxx —t
SOH R Data STX Command ETB ETX
Selectable items, such as menu names, menu options, buttons, tabs, and field names are
written in the font shown here:
From the File menu, select New.
Click the OK button.
Specifications Availability
Product specifications are available on the Extron website, www.extron.com.
Extron Glossary of Terms
A glossary of terms is available at http://www.extron.com/technology/glossary.aspx.
xiiXTP SR HDMI Scaling Receiver • Contents
Contents
Introduction ...............................................1
Guide Overview ................................................... 1
XTP SR HDMI Scaling Receiver Description ......... 1
System Compatibility ........................................... 2
Features .............................................................. 2
Installation .................................................4
Rear Panel Connectors ........................................ 4
Connection Details .............................................. 7
HDMI Connection ............................................ 7
TP Cable Termination and
Recommendations ......................................... 8
RS-232 and IR Over XTP Communication ..... 10
Power Connection ......................................... 11
Operation .................................................14
Front Panel Features and Indicators ................... 14
Rear Panel HDMI Audio Switch ......................... 15
Audio Output Overview ...................................... 15
On-Screen Display Menu System ...................... 15
Menu Navigation Using Front Panel
Controls ........................................................ 16
Menu Overview .............................................. 16
Image Reset Submenu .................................. 17
Picture Controls Submenu ............................. 17
User Presets Submenu .................................. 18
Input Configuration Submenu ........................ 19
Output Configuration Submenu ..................... 19
Advanced Configuration Submenu ................ 21
Front Panel Lockout Mode (Executive Mode) ..... 22
Reset Mode ....................................................... 22
SIS Configuration and Control .................23
Host Device Connection .................................... 23
SIS Overview ..................................................... 23
Host-to-Device and Device-to-Host
Communication ............................................ 23
Device-Initiated Message ............................... 23
Error Responses ............................................ 24
Using Command and Response Tables
for SIS Commands ....................................... 24
Symbol Definitions ......................................... 25
Command and Response Tables for SIS
Commands ...................................................... 26
Picture Adjustment Commands ..................... 26
Output Configuration Commands .................. 28
Audio Configuration Commands .................... 29
Preset Commands ......................................... 29
Advanced Configuration Commands ............. 30
XTP System Configuration Software ........32
Software Installation........................................... 32
Software Download Center Page ................... 32
Software Product Page .................................. 33
Software Operation............................................ 34
Connections .................................................. 34
Menu Bar ...................................................... 35
Device Settings .............................................. 38
Reference Information ............................. 47
Mounting ........................................................... 47
Tabletop Mounting ......................................... 47
Furniture Mounting......................................... 47
Rack Mounting .............................................. 47
XTP SR HDMI Scaling Receiver • Introduction 1
Introduction
This section contains general information about this guide and the Extron XTP SR HDMI
Scaling Receiver. Topics in this section include:
• Guide Overview
• XTP SR HDMI Scaling Receiver Description
• System Compatibility
• Features
Guide Overview
This guide provides installation, operation, control, and reference information for the
XTP SR HDMI scaling receiver. In this guide, the terms “scaling receiver” and
“XTP SR HDMI” are used interchangeably to refer to the XTP SR HDMI scaling receiver.
XTP SR HDMI Scaling Receiver Description
The Extron XTP SR HDMI receives video, audio, bidirectional RS-232 and IR, and Ethernet
signals over a single twisted pair cable. It is HDCP-compliant and supports 1080p/60 Deep
Color, 1920x1200 signals, and embedded HD lossless audio formats. It works with Extron
XTP devices in matrix, or point-to-point applications for signal distribution and long-distance
transmission (up to 330 feet) between remote endpoints, using shielded twisted pair cable.
It can be powered locally or remotely through an Extron XTP Power Injector or XTP matrix
switcher (see Power Connection on page 11).
This device can be controlled through the on-screen display (OSD) menu (see On-Screen
Display Menu System on page 15), Extron Simple Instruction Set (SIS) commands (see
SIS Configuration and Control on page 23), or the XTP System Configuration Software
(see XTP System Configuration Software on page 32).
XTP SR HDMI Scaling Receiver • Introduction 2
The following diagram shows one way the XTP SR HDMI can be integrated in an XTP
point-to-point application. The scaling receiver can also be used with an XTP matrix
switcher (see the XTP matrix switcher user guide for more details on matrix applications).
HD
CP
SIGNAL
AUTO
SWIT
CH
X
T
P
T USW 1
03
CON
FIG
1
2
3
1
2
3
STATUS
MODE
NORMAL
AU
T
O
XTP
HD
CP
SIGNAL
A
UDIO
HDMI
HBR
S/PDIF
BITSTR
EAM
ANALO
G
LPC
M
XTP SR HDMI
MEN
U ENTER
AD
JUST
C
ONFIG
AD
J
XTP
ST
XTP
HDCP
SIGNAL
AUDIO
HDMI
HBR
S/PDIF
BITSTREAM
ANALOG
LPCM
XTP SR HDMI
MENU ENTER
ADJUST
CONFIG
ADJ
XTP
ST
Extron
Extron
Cable Cubby
TouchLink
Control
Ethernet
VGA
Cable
VGA
Cable
HDMI
Cable
DVI-HDMI
Cable
HDMI
Cable
DVI
Cable
Audio
Cable
Audio
Cable
XTP
Cable (330')
HDMI
Cable
Projector
Extron
XTP T USW 103
XTP Transmitter
Extron
XTP SR HDMI
XTP Scaling
Receiver
Ethernet
Figure 1. Typical XTP SR HDMI Point-to-Point Application
System Compatibility
The XTP SR HDMI is compatible with XTP systems, but the maximum video resolution may
be limited with different XTP devices. See the table below for maximum video resolutions
and refresh rates for various XTP systems.
Output
Non-4K 4K Fiber 4K PLUS
Input
Analog 1920x1200 @ 60 Hz 1920x1200 @ 60 Hz 1920x1200 @ 60 Hz
Non-4K Digital 2048x1080 @ 60 Hz 2048x1080 @ 60 Hz 2048x1080 @ 60 Hz
4K Fiber 2048x1080 @ 60 Hz 4096x2160 @ 24 Hz 4096x2160 @ 24 Hz
4K PLUS 2048x1080 @ 60 Hz 4096x2160 @ 24 Hz 4096x2160 @ 60 Hz
Features
• Reliable cable infrastructure — Provides high reliability and maximum performance
on an economical and easily installed cable infrastructure.
• Support for computer-video to 1920x1200, including HDTV 1080p/60 Deep
Color and 2K signals — Maintains superior image quality at the highest resolutions.
XTP SR HDMI Scaling Receiver • Introduction 3
• Shielded twisted pair cable compatibility — Optimized for use with common
shielded twisted pair cable types. XTP systems fully support a maximum transmission
distance of 330 feet (100 meters) for all compatible resolutions when used with shielded
twisted pair cable. Shielded twisted pair cabling with solid center conductor sizes of
24 AWG or better is recommended for optimal performance.
• Bidirectional RS-232 and IR insertion — Allows a remote display to be controlled
without the need for additional cabling through bidirectional RS-232 control and IR
signals inserted into the XTP output.
• HDMI specification features — Support data rates up to 6.75 Gbps, Deep Color up
to 12-bit, and HD lossless audio formats.
• HDCP compliance — Ensures display of content-protected media and interoperability
with other HDCP-compliant devices.
• EDID Minder — Automatically manages EDID communication between connected
devices. It ensures that all sources power up properly and reliably outputs content for
display.
• Key Minder — Authenticates and maintains continuous HDCP encryption between
input and output devices to ensure quick and reliable switching in professional AV
environments, while enabling simultaneous distribution of a single source signal to one
or more displays.
• Ethernet extension — Centralized 10/100Base-T Ethernet communication can be
implemented via an Ethernet pass-through port to reduce the amount of independent
network drops required within a system.
• Remote power capability — Allows the XTP SR HDMI to be powered by an XTP
CrossPoint Matrix Switcher or XTP Power Injectors to simplify integration.
• Multiple embedded audio formats — Provides reliable operation with HDMI sources,
compatible with a broad range of multi-channel audio signals.
• HDMI audio de-embedding with analog stereo and digital S/PDIF audio outputs
— Digital HDMI audio is made available as a balanced or unbalanced analog stereo
signal on captive screw connectors or an S/PDIF connector.
• Contact closure device control — Enables control of room functions such as
projector lifts, screen operations, and other environmental controls.
• Aspect ratio control — Controls the aspect ratio of the video output to provide a full
screen output or to preserve the original aspect ratio of the input signal.
• Image freeze control — Freezes a live image through RS-232 or USB control.
• Internal test patterns — Include five test patterns for calibration and setup.
• XTP compatibility — Provides a completely integrated solution for multiple digital and
analog formats through XTP integrated system products. XTP is a flexible, reliable signal
switching and distribution system.
• Front panel security lockout — Allows security lockout of front panel buttons.
• UL 2043 plenum rated — Meets UL 2043 for smoke and heat release for installation
within a plenum airspace above a drop ceiling (power supply excluded).
Above-the-ceiling placement conceals the scaling receiver to prevent theft, and is
convenient for installing equipment when space inside the room is limited.
XTP SR HDMI Scaling Receiver • Installation 4
Installation
This section contains installation procedures for the XTP SR HDMI and wiring details. Topics
in this section include:
• Rear Panel Connectors
• Connection Details
The XTP SR HDMI can be placed on a tabletop or mounted in a rack or under a desk (see
Mounting on page 47).
Rear Panel Connectors
LAN
SIG LINK
XTP IN
POWER
12V
HDMI
1.0 A MAX
Rx GTx
RS-232 IR
RxTx
−+−+
LR
1
2
OVER XTP
AUDIO
OFF
ON
S/PDIF
RESET
RS-232
Tx Rx G
REMOTERELAYS
OUTPUTS
AUDIO
IABC DEFG
H
A
XTP input connector (see page 4)
B
LAN connector (see page 5)
C
RS-232 and IR Over XTP connector
(see page 5)
D
HDMI output connector (see page 5)
E
Analog audio output connector
(see page 6)
F
S/PDIF audio output connector
(see page 6)
G
Relay connectors (see page 6)
H
Remote RS-232 connector
(see page 6)
I
Power connector and LED
(see page 6)
Figure 2. XTP SR HDMI Rear Panel Connectors
A
XTP input connector — Connect a twisted pair cable to the RJ-45 connector labeled
XTP IN on the XTP SR HDMI and the XTP output port on another XTP device to pass
all signals (see TP Cable Termination and Recommendations on page 8). This
cable carries the following signals:
• Digital video
• Digital audio
• Bidirectional RS-232 and IR commands
• Remote power
• Ethernet communication
• System communication
Signal LED indicator — Lights green when the XTP SR HDMI receives an
active XTP input signal from a compatible transmitter or matrix switcher.
Link LED indicator — Lights yellow when a valid XTP link is established.
SignalLink
XTP SR HDMI Scaling Receiver • Installation 5
ATTENTION:
• Do not connect this connector to a computer data or telecommunications
network.
• Ne connectez pas ce connecteur à un réseau de données informatiques ou à
un réseau de télécommunications.
• XTP remote power is intended for indoor use only. No part of the network that
uses XTP remote power should be routed outdoors (see Remote power on
page 13).
• XTP à distance est destiné à une utilisation en intérieur seulement. Aucune
partie du réseau qui utilise l’alimentation XTP à distance ne peut être routée en
extérieur (voir Remote power à la page 13).
B
LAN connector — Connect a control device or device to be controlled to the RJ-45
connector labeled LAN (see figure 2,
B
on the previous page) for 10/100Base-T
Ethernet communication through this pass-through port. LEDs on the connector
indicate link and activity status.
C
RS-232 Over XTP port — To pass bidirectional serial signals between
XTP-compatible devices, connect a control device to the 5-pole captive
screw connector (see figure 2,
C
on the previous page). The port includes
only the 3 poles labeled “RS-232.”
IR Over XTP port — To transmit and receive IR signals (up to 56 kHz),
connect a control device to the 5-pole captive screw connector. This port
includes the 2 poles labeled “IR” and shares the ground pole with the
RS-232 port.
NOTE: RS-232 and IR data can be transmitted simultaneously (see RS-232 and IR
Over XTP Communication on page 10 for wiring details).
D
HDMI output connector — Connect a digital video display to the female HDMI
connector (see figure 2,
D
on the previous page). See Rear Panel HDMI Audio
Switch on page 15 to mute or unmute embedded audio output. It supports HDMI or
DVI (with an appropriate adapter) signals.
NOTES:
• The maximum cable length is 15 feet (4.6 meters).
• Use an Extron LockIt Cable Lacing Bracket to secure the HDMI connector to
the device (see HDMI Connection on page 7).
IR
Tx Rx G Tx Rx
RS-232
IR
Tx Rx G Tx Rx
RS-232
XTP SR HDMI Scaling Receiver • Installation 6
E
Analog audio output connector — Connect a balanced or unbalanced, stereo or
mono audio output device to the 3.5 mm, 5-pole captive screw connector (see
figure 2,
E
on page 4) for analog audio output (see figure 3 for wiring details).
NOTE: If the device is receiving 2-channel LPCM embedded audio on the HDMI
input signal, it is extracted and converted to a stereo analog signal.
Tip
Ring
Tip
Ring
ves
Tip
No Ground Here
Tip
Sleeves
LR
LR
Figure 3. Audio Output Wiring
ATTENTION:
• For unbalanced audio, connect the sleeves to the contact ground. Do not
connect the sleeves to the negative (-) contacts.
• Pour l’audio asymétrique, connectez les manchons au contact au sol. Ne pas
connecter les manchons aux contacts négatifs (–).
F
S/PDIF audio output connector — Connect an audio device to the female orange
RCA connector (see figure 2,
F
on page 4) for digital S/PDIF audio output (see
Audio Output Overview on page 15 for supported audio formats on the S/PDIF
output). The type of audio present on this output is dictated by the following:
• The audio format selected on the source material or device.
• The source device automatically outputting an audio format through EDID.
G
Relay connectors — Connect equipment that can be controlled via momentary or
latching contact, such as projector screens or lifts, to the normally open relays (see
figure 2,
G
on page 4).
ATTENTION:
• Do not exceed 24 V at 1.0 A for each port.
• Ne pas dépasser 24volts à 1,0A pour chaque port.
H
Remote RS-232 connector — Connect a host device to the 3.5 mm, 3-pole captive
screw connector (see figure 2,
H
on page 4) for serial control of the scaling
receiver.
I
Power connector and LED — Connect the external 12 V, 1.0 A power supply to the
2-pole captive screw connector (see figure 2,
I
on page 4). The Power LED lights
to indicate the device is receiving power.
NOTE: The XTP SR HDMI can also be powered remotely (see Power Connection
on page 11).
XTP SR HDMI Scaling Receiver • Installation 7
Connection Details
HDMI Connection
To secure the HDMI cable to the HDMI input connector, use an Extron LockIt Cable Lacing
Bracket and a tie wrap.
3
1
2
3
4
5
Figure 4. Installing the LockIt Cable Lacing Bracket
1. Plug the HDMI cable into the panel connection (see figure 4,
1
).
2. Loosen the HDMI connection mounting screw from the panel (
2
) enough to allow the
LockIt to be placed over it. The screw does not have to be removed.
3. Place the LockIt on the screw and against the HDMI connector (
3
), and then tighten
the screw to secure the bracket.
4. Loosely place the included tie wrap around the HDMI connector and the LockIt (
4
).
5. While holding the connector securely against the cable lacing bracket, use pliers or
similar tools to tighten the tie wrap, then remove any excess length (
5
).
ATTENTION:
• Connect and pull the tie wraps until they are secure. Do not overtighten.
• Connectez et tirez les serre-câbles jusqu’à ce qu’ils soient sécurisés. Ne pas
trop serrer.
XTP SR HDMI Scaling Receiver • Installation 8
TP Cable Termination and Recommendations
Use the following pin configurations for twisted pair cables.
12345678
RJ-45
Connector
Inser
t Twisted
Pair Wires
Pins:
Pin
1
2
3
4
5
6
7
8
Wire color
White-green
Green
White-orange
Blue
White-blue
Orange
White-brown
Brown
Wire color
T568A T568B
White-orange
Orange
White-green
Blue
White-blue
Green
White-brown
Brown
TIA/EIA-T568B
Pin Wire Color
1 White-orange
2 Orange
3 White-green
4 Blue
5 White-blue
6 Green
7 White-brown
8 Brown
Figure 5. Twisted Pair Cable Termination
Supported cables
The XTP SR HDMI is compatible with shielded twisted pair (F/UTP, SF/UTP, and S/FTP) and
unshielded twisted pair (U/UTP) cables.
ATTENTION:
• Do not use Extron UTP23SF-4 Enhanced Skew-Free AV UTP cable or STP201
cable to link the XTP products.
• N’utilisez pas le câble AV Skew-Free UTP version améliorée UTP23SF d’Extron ou
le câble STP201 pour relier les produits XTP.
• To ensure FCC Class A and CE compliance, STP cables and STP connectors are
required.
• Afin de s’assurer de la compatibilité entre FCC Classe A et CE, les câbles STP et
les connecteurs STP sont nécessaires.
XTP SR HDMI Scaling Receiver • Installation 9
Cable recommendations
Extron recommends using the following practices for XTP communication to achieve full
transmission distances up to 330 feet (100 meters) and reduce transmission errors.
• Use the following Extron XTP DTP 24 SF/UTP cables and connectors for the best
performance:
• XTP DTP 24/1000 Non-Plenum 1000’ (305 m) spool 22-236-03
• XTP DTP 24P/1000 Plenum 1000’ (305 m) spool 22-235-03
• XTP DTP 24 Plug Package of 10 101-005-02
• If not using XTP DTP 24 cable, at a minimum, Extron recommends 24 AWG, solid
conductor, STP cable with a minimum bandwidth of 400 MHz.
• Terminate cables with shielded connectors to the TIA/EIA-T568B standard (see figure 5
on the previous page).
• Limit the use of more than two pass-through points, which may include patch points,
punch down connectors, couplers, and power injectors. If these pass-through points
are required, use shielded couplers and punch down connectors.
NOTE: When using STP cable in bundles or conduits, consider the following:
• Do not exceed 40% fill capacity in conduits.
• Do not comb the cable for the first 20 m, where cables are straightened, aligned,
and secured in tight bundles.
• Loosely place cables and limit the use of tie wraps or hook-and-loop fasteners.
• Separate twisted pair cables from AC power cables.
XTP SR HDMI Scaling Receiver • Installation 10
RS-232 and IR Over XTP Communication
The RS-232 and IR Over XTP connector is for pass-through transmission of serial signals,
such as projector control signals, and infrared data. To pass bidirectional serial command
signals between XTP-compatible devices, connect a control device to the three poles
(Tx, Rx, and G) under “RS-232” of the 5-pole captive screw connector. To transmit and
receive IR signals, connect a control device to the three poles (G, Tx, and Rx) under “IR.”
The ground (G) pole is shared.
NOTE: RS-232 and IR data can be transmitted or received simultaneously (see figure 6
below for wiring considerations).
Tx/Rx
Pins
RxTx
RS-232 IR
RxTx
TxRx
RxTx
IR Device
RS-232 De
vice
G
G
G
Figure 6. Wiring the RS-232 and IR Over XTP Connector
ATTENTION: The length of the exposed wires in the stripping process is important.
ATTENTION : La longueur des câbles exposés est importante lorsque l’on entreprend
de les dénuder.
• The ideal length is 3/16 inch (5 mm).
• La longueur idéale est de 5mm (3/16inches).
• If the exposed portion is longer, the wires may touch, causing a short circuit
between them.
• S’ils sont un peu plus longs, les câbles exposés pourraient se toucher et provoquer
un court circuit.
• If the exposed wires are shorter, they can be easily pulled out, even if tightly
fastened by the captive screws.
• S’ils sont un peu plus courts, ils pourraient sortir, même s’ils sont attachés par les
vis captives.
XTP SR HDMI Scaling Receiver • Installation 11
Power Connection
Apply power to the scaling receiver locally with the provided power supply (if necessary,
see figure 7 for wiring considerations) or remotely (through the XTP connector) with a power
injector or a matrix switcher.
Local power
SECTION A–A
AA
Power Supply
Output Cord
2-Pole Captive Screw
Connector
Ridges
Smooth
Tie
Wrap
3/16”
(5 mm) Max.
Figure 7. Power Wiring
The receiver can be powered by a local power supply. See the notifications on the next
page for local power considerations.
XTP SR HDMI Scaling Receiver • Installation 12
ATTENTION:
• This product is intended for use with a UL Listed power source marked “Class 2”
or “LPS” rated 12 VDC, 1.0 A minimum, 48 VDC (PoE), minimum 0.35 A, or an
Extron UL Listed XTP remote power source. Always use a power supply supplied
by or specified by Extron. Use of an unauthorized power supply voids all regulatory
compliance certification and may cause damage to the supply and the unit.
• Ce produit est destiné à une utilisation avec une source d’alimentation certifiée UL
de classe 2 ou LPS et calibrée à 12 Vcc, 1,0 A minimum, 48 Vcc (PoE),
0,35 A minimum, ou une source d’alimentation délocalisée XTP Extron certifiée UL.
Utilisez toujours une source d’alimentation fournie par Extron. L’utilisation d’une
source d’alimentation non autorisée annule toute conformité réglementaire et peut
endommager la source d’alimentation ainsi que l’unité.
• Unless otherwise stated, the AC/DC adapters are not suitable for use in air handling
spaces or in wall cavities. The installation must always be in accordance with the
applicable provisions of National Electrical Code ANSI/NFPA 70, article 725 and
the Canadian Electrical Code part 1, section 16. The power supply shall not be
permanently fixed to a building structure or similar structure.
• Sauf mention contraire, les adaptateurs AC/DC ne sont pas appropriés pour
une utilisation dans les espaces d’aération ou dans les cavités murales. Cette
installation doit toujours être en accord avec les mesures qui s’applique au National
Electrical Code ANSI/NFPA 70, article 725, et au Canadian Electrical Code,
partie 1, section 16. La source d’alimentation ne devra pas être fixée de façon
permanente à une structure de bâtiment ou à une structure similaire.
• Power supply voltage polarity is critical. Incorrect voltage polarity can damage the
power supply and the unit. The ridges on the side of the cord identify the power
cord negative lead.
• La polarité de la source d’alimentation est primordiale. Une polarité incorrecte
pourrait endommager la source d’alimentation et l’unité. Les stries sur le côté du
cordon permettent de repérer le pôle négatif du cordon d’alimentation.
• The length of the exposed (stripped) copper wires is important. The ideal length is
3/16 inch (5 mm).
• La longueur des câbles exposés est primordiale lorsque l’on entreprend de les
dénuder. La longueur idéale est de 5 mm (3/16 inch).
TIP: Do not tin the stripped power supply leads. Tinned wires are not as secure in the
captive screw connectors and could be pulled out.
XTP SR HDMI Scaling Receiver • Installation 13
Remote power
The XTP SR HDMI can be powered remotely through an XTP Power Injector or through an
XTP matrix switcher.
ATTENTION:
• XTP remote power is intended for indoor use only. No part of the network that uses
XTP remote power should be routed outdoors.
• XTP à distance est destiné à une utilisation en intérieur seulement. Aucune partie
du réseau qui utilise l’alimentation XTP à distance ne peut être routée en extérieur.
Power injector
To power the XTP SR HDMI remotely with an XTP Power Injector, power a connected
transmitter locally (see Local power on page 11) and connect an XTP Power Injector to
the XTP cable run along the XTP ports (see the XTP Power Injector User Guide at
www.extron.com for more installation information).
POWER
12V
HDMI
0.7A MAX
Rx GTx
RS-232 IR
RxTx
−+
−+
LR
LOOP THRU
RESET
AUDIO
OFF
ON
AUDIO
XTP T HDMI
LAN
SIG LINK
XTP OUT
INPUTS
OVER XTP
LAN
SIG LINK
XTP IN
POWER
12V
HDMI
1A MAX
Rx GTx
RS-232 IR
RxTx
−+−+
LR
1
2
OVER XTP
AUDIO
OFF
ON
S/PDIF
RESET
RS-232
Tx Rx G
REMOTERELAYS
OUTPUTS
AUDIO
XTP
PWR
XTP PWR
100-240V
50/60 Hz
---A MAX
Power
Extron
XTP SR HDMI
XTP Receiver
Extron
XTP T HDMI
XTP Transmitter
Extron
XTP PI 100
XTP Power
Injector
Shielded Twisted Pair
Cable
REMOTE
POWER
12V Local Power
Supply
Figure 8. Typical Point-to-Point Application with Remote Power
NOTE: The power injector provides remote power up to 330 feet (100 m) with a
shielded twisted pair cable with 24 AWG wire.
XTP matrix switcher
XTP matrix switchers have a fixed amount of power available to provide remote power to
connected XTP devices (see the appropriate XTP matrix switcher user guide at
www.extron.com for more details). To manage available power from the XTP matrix
switcher, use the XTP System Configuration Software with the matrix switcher.
XTP SR HDMI Scaling Receiver • Operation 14
Operation
This section contains information for front panel operation and configuration of the
XTP SR HDMI and configuration through the On-Screen Display (OSD) menu. Topics in this
section include:
• Front Panel Features and Indicators
• Rear Panel HDMI Audio Switch
• Audio Output Overview
• On-Screen Display Menu System
• Front Panel Lockout Mode (Executive Mode)
• Reset Mode
Front Panel Features and Indicators
XTP
HDCP
SIGNAL
AUDIO
HDMI
HBR
S/PDIF
BITSTREAM
ANALOG
LPCM
XTP SR HDMI
MENU ENTER
ADJUST
CONFIG
ADJ
X
X
X
XTP
U
ST
CD EF GAB
Figure 9. XTP SR HDMI Front Panel
A
Power LED indicators — Lights when power is applied to the unit. There are two
Power LED indicators, one on the front panel and one on the left side of the rear panel.
B
Configuration port — If desired, connect a host device to the front panel USB mini-B
port for configuring the scaling receiver.
C
XTP indicators:
• Signal LED indicator — Lights when an active XTP input signal is received.
• HDCP LED indicator — Lights when the received input signal is encrypted.
D
Audio indicators:
• HBR LED indicator — Lights when the audio input is high bit rate audio.
• Bitstream LED indicator — Lights when the embedded audio signal format is a
Dolby
®
Digital, DTS, or 2-Ch Dolby.
• LPCM LED indicator — Lights when the embedded audio signal is LPCM-2Ch.
• HDMI LED indicator — Lights when the HDMI audio output is enabled.
• S/PDIF LED indicator — Lights when the S/PDIF audio output is enabled.
• Analog LED indicator — Lights when the analog audio output is enabled.
E
Menu button — Press this button to navigate the OSD menu or enable or disable front
panel lockout mode (see Front Panel Lockout Mode (Executive Mode) on
page 22).
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54

Extron XTP SR HDMI User manual

XTP SR HDMI
Extron
Brand
Extron
Model
XTP SR HDMI
Category
Video switches
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents