Extron electronics XTP FT HD 4K User manual

Type
User manual
User Guide
XTP FT HD 4K
XTP Systems
XTP Fiber Optic Transmitter
68-2201-01 Rev. F
03 19
Safety Instructions
Safety Instructions • English
WARNING: This symbol, , when used on the product, is intended to
alert the user of the presence of uninsulated dangerous voltage within the
product’s enclosure that may present a risk of electric shock.
ATTENTION: This symbol, , when used on the product, is intended
to alert the user of important operating and maintenance (servicing)
instructions in the literature provided with the equipment.
For information on safety guidelines, regulatory compliances, EMI/EMF
compatibility, accessibility, and related topics, see the Extron Safety and
Regulatory Compliance Guide, part number 68-290-01, on the Extron
website, www.extron.com.
Sicherheitsanweisungen • Deutsch
WARNUNG: Dieses Symbol auf dem Produkt soll den Benutzer darauf
aufmerksam machen, dass im Inneren des Gehäuses dieses Produktes
gefährliche Spannungen herrschen, die nicht isoliert sind und die einen
elektrischen Schlag verursachen können.
VORSICHT: Dieses Symbol auf dem Produkt soll dem Benutzer in
der im Lieferumfang enthaltenen Dokumentation besonders wichtige
Hinweise zur Bedienung und Wartung (Instandhaltung) geben.
Weitere Informationen über die Sicherheitsrichtlinien, Produkthandhabung,
EMI/EMF-Kompatibilität, Zugänglichkeit und verwandte Themen finden Sie in
den Extron-Richtlinien für Sicherheit und Handhabung (Artikelnummer
68-290-01) auf der Extron-Website, www.extron.com.
Instrucciones de seguridad • Español
ADVERTENCIA: Este símbolo, , cuando se utiliza en el producto,
avisa al usuario de la presencia de voltaje peligroso sin aislar dentro del
producto, lo que puede representar un riesgo de descarga eléctrica.
ATENCIÓN: Este símbolo, , cuando se utiliza en el producto, avisa
al usuario de la presencia de importantes instrucciones de uso y
mantenimiento recogidas en la documentación proporcionada con el
equipo.
Para obtener información sobre directrices de seguridad, cumplimiento
de normativas, compatibilidad electromagnética, accesibilidad y temas
relacionados, consulte la Guía de cumplimiento de normativas y seguridad
de Extron, referencia 68-290-01, en el sitio Web de Extron, www.extron.com.
Instructions de sécurité • Français
AVERTISSEMENT : Ce pictogramme, , lorsqu’il est utilisé sur le
produit, signale à l’utilisateur la présence à l’intérieur du boîtier du produit
d’une tension électrique dangereuse susceptible de provoquer un choc
électrique.
ATTENTION : Ce pictogramme, , lorsqu’il est utilisé sur le produit,
signale à l’utilisateur des instructions d’utilisation ou de maintenance
importantes qui se trouvent dans la documentation fournie avec le
matériel.
Pour en savoir plus sur les règles de sécurité, la conformité à la
réglementation, la compatibilité EMI/EMF, l’accessibilité, et autres sujets
connexes, lisez les informations de sécurité et de conformité Extron, réf.
68-290-01, sur le site Extron, www.extron.com.
Istruzioni di sicurezza • Italiano
AVVERTENZA: Il simbolo, , se usato sul prodotto, serve ad avvertire
l’utente della presenza di tensione non isolata pericolosa all’interno del
contenitore del prodotto che può costituire un rischio di scosse elettriche.
ATTENTZIONE: Il simbolo, , se usato sul prodotto, serve ad avvertire
l’utente della presenza di importanti istruzioni di funzionamento e
manutenzione nella documentazione fornita con l’apparecchio.
Per informazioni su parametri di sicurezza, conformità alle normative,
compatibilità EMI/EMF, accessibilità e argomenti simili, fare riferimento
alla Guida alla conformità normativa e di sicurezza di Extron, cod. articolo
68-290-01, sul sito web di Extron, www.extron.com.
Instrukcje bezpieczeństwa • Polska
OSTRZEŻENIE: Ten symbol, , gdy używany na produkt, ma na celu
poinformować użytkownika o obecności izolowanego i niebezpiecznego
napięcia wewnątrz obudowy produktu, który może stanowić zagrożenie
porażenia prądem elektrycznym.
UWAGI: Ten symbol, , gdy używany na produkt, jest przeznaczony do
ostrzegania użytkownika ważne operacyjne oraz instrukcje konserwacji
(obsługi) w literaturze, wyposażone w sprzęt.
Informacji na temat wytycznych w sprawie bezpieczeństwa, regulacji wzajemnej
zgodności, zgodność EMI/EMF, dostępności i Tematy pokrewne, zobacz Extron
bezpieczeństwa i regulacyjnego zgodności przewodnik, część numer 68-290-
01, na stronie internetowej Extron, www.extron.com.
Инструкция по технике безопасности Русский
ПРЕДУПРЕЖДЕНИЕ: Данный символ, , если указан
на продукте, предупреждает пользователя о наличии
неизолированного опасного напряжения внутри корпуса
продукта, которое может привести к поражению электрическим
током.
ВНИМАНИЕ: Данный символ, , если указан на продукте,
предупреждает пользователя о наличии важных инструкций
по эксплуатации и обслуживанию в руководстве,
прилагаемом к данному оборудованию.
Для получения информации о правилах техники безопасности,
соблюдении нормативных требований, электромагнитной
совместимости (ЭМП/ЭДС), возможности доступа и других
вопросах см. руководство по безопасности и соблюдению
нормативных требований Extron на сайте Extron: ,
www.extron.com, номер по каталогу - 68-290-01.
安全说明 简体中文
警告 产品上的这个标志意在警告用户该产品机壳内有暴露的危险 电压,
险。
注意 产品上的这个标志意在提示用户设备随附的用户手册中有
重要的操作和维护(维说明
关于我们产品的安全指南、遵循的规范、EMI/EMF 的兼容性、无障碍
使用的特性等相关内容,敬请访问 Extron 网站 , www.extron.com,参见
Extron 安全规范指南,产品编号 68-290-01
안전 지침 • 한국어
경고: 이 기호 가 제품에 사용될 경우, 제품의 인클로저 내에 있는
접지되지 않은 위험한 전류로 인해 사용자가 감전될 위험이 있음을
경고합니다.
주의: 이 기호 가 제품에 사용될 경우, 장비와 함께 제공된 책자에 나와
있는 주요 운영 및 유지보수(정비) 지침을 경고합니다.
안전 가이드라인, 규제 준수, EMI/EMF 호환성, 접근성, 그리고 관련 항목에
대한 자세한 내용은 Extron 웹 사이트(www.extron.com)의 Extron 안전 및
규제 준수 안내서, 68-290-01 조항을 참조하십시오.
安全記事 • 繁體中文
警告: 若產品上使用此符號是為了提醒使用者產品機殼內存
可能會導致觸電之風險的未絕緣危險電壓
注意 產品上使用此符號,是為提醒使用設備隨附的用戶手冊中
重要的操作和維(維修説明
有關安全性指導方針法規遵守EMI/EMF 相容存取範圍和相主題的詳細資
訊,請瀏覽 Extron 網站www.extron.com然後參《Extron 安全性與法規
守手冊準則編號 68-290-01。
安全上の注意 日本語
警告: この 製品上に表示されている場合は筐体内に絶縁され
いない高電圧が流れ、電の危険があるていま
意:この 品上に表されている場合は、の取説明書に
されている重作と保()についてユザー
を喚起するものです
安全上の注意、法規厳守、EMI/EMF適合性、その他の関連項
スト イト www.extron.com Extron Safety
and Regulatory Compliance Guide』 ( P/N 68-290-01)ご覧ださい。
Copyright
© 2015-2019 Extron Electronics. All rights reserved. www.extron.com
Trademarks
All trademarks mentioned in this guide are the properties of their respective owners.
The following registered trademarks (
®
), registered service marks (
SM
), and trademarks (
TM
) are the property of RGBSystems, Inc. or
ExtronElectronics (see the current list of trademarks on the Terms of Use page at www.extron.com):
Registered Trademarks
(
®
)
Extron, Cable Cubby, ControlScript, CrossPoint, DTP, eBUS, EDID Manager, EDID Minder, Flat Field, FlexOS, Global Configurator,
GlobalScripter, GlobalViewer, Hideaway, HyperLane, IPIntercom, IPLink, KeyMinder, LinkLicense, LockIt, MediaLink, MediaPort, NetPA,
PlenumVault, PoleVault, PowerCage, PURE3, Quantum, Show Me, SoundField, SpeedMount, SpeedSwitch, SystemINTEGRATOR,
TeamWork, TouchLink, V-Lock, VideoLounge, VN-Matrix, VoiceLift, WallVault, WindoWall, XTP, XTPSystems, and ZipClip
Registered Service Mark
(SM)
: S3 Service Support Solutions
Trademarks
(
)
AAP, AFL (Accu-RateFrameLock), ADSP(Advanced Digital Sync Processing), Auto-Image, CableCover, CDRS(ClassD Ripple
Suppression), Codec Connect, DDSP(Digital Display Sync Processing), DMI (DynamicMotionInterpolation), DriverConfigurator,
DSPConfigurator, DSVP(Digital Sync Validation Processing), eLink, EQIP, Everlast, FastBite, FOX, FOXBOX, IP Intercom HelpDesk,
MAAP, MicroDigital, Opti-Torque, PendantConnect, ProDSP, QS-FPC(QuickSwitch Front Panel Controller), Room Agent, Scope-Trigger,
ShareLink, SIS, SimpleInstructionSet, Skew-Free, SpeedNav, StudioStation, Triple-Action Switching, True4K, Vector™ 4K , WebShare,
XTRA, and ZipCaddy
FCC Class A Notice
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part15 of the FCC rules. The ClassA limits provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause interference. This interference must be corrected at the expense of the user.
Class 1 Laser Product
Any service to this product must be carried out by Extron Electronics and its qualified
service personnel.
CAUTION: Using controls, making adjustments, or performing procedures in a manner
other than what is specified herein may result in hazardous radiation exposure.
NOTE: For more information on safety guidelines, regulatory compliances, EMI/EMF
compatibility, accessibility, and related topics, see the “Extron Safety and
Regulatory Compliance Guide” on the Extron website.
Produit laser de classe1
Si ce produit a besoin d’un quelconque entretient, celui-ci doit être fait par
ExtronElectronics et son personnel qualifié.
ATTENTION : L’utilisation de commandes, la réalisation de réglages, ou l’exécution de
procédures de manière contraire aux dispositions établies dans le présent document,
présente un risque d’exposition dangereuse aux radiations.
Remarque: Pour plus d'informations sur les directives de sécurité, les conformités de
régulation, la compatibilité EMI/EMF, l'accessibilité, et les sujets en lien, consultez le
«Informations de sécurité et de conformité Extron» sur le site internet d'Extron.
Conventions Used in this Guide
Notifications
The following notifications are used in this guide:
WARNING: Potential risk of severe injury or death.
AVERTISSEMENT : Risque potentiel de blessure grave ou de mort.
CAUTION: Risk of minor personal injury.
ATTENTION : Risque de blessuremineure.
ATTENTION:
Risk of property damage.
Risque de dommages matériels.
NOTE: A note draws attention to important information.
TIP: A tip provides a suggestion to make working with the application easier.
Software Commands
Commands are written in the fonts shown here:
^AR Merge Scene,,0p1 scene 1,1 ^B 51 ^W^C.0
[01] R 0004 00300 00400 00800 00600 [02] 35 [17] [03]
E X! *X1&* X2)* X2#* X2! CE}
NOTE: For commands and examples of computer or device responses used in this
guide, the character “0” is used for the number zero and “O” is the capital letter
“o.”
Computer responses and directory paths that do not have variables are written in the font
shown here:
Reply from 208.132.180.48: bytes=32 times=2ms TTL=32
C:\Program Files\Extron
Variables are written in slanted form as shown here:
ping xxx.xxx.xxx.xxx —t
SOH R Data STX Command ETB ETX
Selectable items, such as menu names, menu options, buttons, tabs, and field names are
written in the font shown here:
From the File menu, select New.
Click the OK button.
Specifications Availability
Product specifications are available on the Extron website, www.extron.com.
Extron Glossary of Terms
A glossary of terms is available at http://www.extron.com/technology/glossary.aspx.
xiiXTP FT HD 4K Fiber Transmitter • Contents
Contents
Introduction............................................................ 1
Guide Overview .................................................. 1
Product Descriptions .......................................... 1
System Compatibility ...................................... 2
Cable Transmission ......................................... 2
Control Methods ............................................. 3
Features ............................................................. 3
XTP Interconnection Features ......................... 3
Video Features ................................................ 3
Audio Features ............................................... 3
Control Features ............................................. 4
General Features ............................................ 4
Installation .............................................................. 5
Rear Panel Connectors ....................................... 5
Transmitter inputs ........................................... 5
Transmitter XTP interconnection .................... 6
Transmitter power ........................................... 6
Connection Details ............................................. 7
HDMI Connection ........................................... 7
RS-232 and IR Communication ...................... 8
Power Connection .......................................... 8
Operation .............................................................. 10
Transmitter Front Panel Features ...................... 10
HDMI Audio Switch .......................................... 11
EDID ................................................................. 11
Audio Output Overview ..................................... 11
Reset Modes .................................................... 12
SIS Configuration and Control ........................ 13
Host Device Connection ................................... 13
SIS Overview .................................................... 13
Host and Device Communication .................. 13
Error Responses ........................................... 13
Using the Command and Response Tables for
SIS Commands ........................................... 14
Symbol Definitions ........................................ 14
Command and Response Tables ...................... 15
Audio Configuration Commands ................... 15
EDID Commands .......................................... 16
Advanced Configuration Commands ............ 16
Device Commands ....................................... 17
Configuration Software ..................................... 18
Software Installation.......................................... 18
Software Download Center Page .................. 18
Software Product Page ................................. 19
Software Connection ........................................ 20
Software Operation........................................... 21
Menu Bar ..................................................... 21
Transmitter Configuration .............................. 24
Reference Information ...................................... 28
Mounting .......................................................... 28
Tabletop Mounting ........................................ 28
Furniture Mounting........................................ 28
Rack Mounting ............................................. 28
Firmware Download .......................................... 29
XTP FT HD 4K Fiber Transmitter • Contents xiii
XTP FT HD 4K Fiber Transmitter • Introduction 1
Introduction
This section contains general information about this guide and the Extron XTP FT HD 4K
Fiber Optic Transmitter. Topics in this section include:
Guide Overview
Product Descriptions
Features
Guide Overview
This guide contains installation, operation, control, and reference information for the
XTP FT HD 4K fiber optic transmitter.
NOTE: See an XTP matrix switcher user guide at www.extron.com for matrix
applications.
In this guide, the terms “XTP FT HD 4K” and “transmitter” are used interchangeably to refer
to the XTP FT HD 4K fiber optic transmitter.
Product Descriptions
The XTP FT HD 4K sends video, audio, bidirectional RS-232 and IR, and Ethernet signals
over a fiber optic cable. It extends digital video signals (up to 4096x2160 @ 24 Hz) with
deep color support up to 500 m (1,640 feet) using a multimode OM4 fiber cable or up to
10 km (6.2 mi) with a singlemode fiber cable.
The following diagram shows one way the XTP FT HD 4K can be integrated in an XTP
point-to-point application.
POWER
12V
1.0A MAX
XTP FR HD 4K
HDMI
S/PDIF
AUDIOAUDIO
SIGLINK
LAN
RS-232 IR
L
Tx Rx Tx Rx
RESET
G
R12ON
OFF
XTP IN
OVER XTP
OUTPUTS
RELAYS
POWER
12V
1.0A MAX
XTP FT HD 4K
HDMI
AUDIO
AUDIO
SIGLINK LAN
RS-232 IR
L
Tx Rx Tx Rx
RESET
G
R
ON
OFF
LOOP THRU
XTP OUTOVER XTPINPUTS
HDMI
Extron
XTP SFR HD 4K
XTP Scaling Receiver
4K Display
HDMI
POWER
12V
--A MAX
HDMI
S/PDIF
AUDIOAUDIO
SIGLINK
LAN
RS-232 RS-232IR
L
Tx Rx Tx Rx
RESET
G
R12ON
OFF
XTP IN
OVER XTP
OUTPUTS
RELAYS
Tx Rx G
REMOTE
MODEL 80
FLAT PANEL
PC
Ext
ron
XT
P FT HD 4K
XTP Transmitter
Fiber
Figure 1. Typical Point-to-Point Application
XTP FT HD 4K Fiber Transmitter • Introduction 2
WARNING: Potential risk of severe injury. The XTP FT HD 4K outputs continuous
invisible light, which may be harmful to the eyes; use with caution.
AVERTISSEMENT : Risque potentiel de blessure grave ou de mort. Le
XTP FT HD 4K émet une lumière invisible en continu qui peut être dangereux pour les
yeux, à utiliser avec précaution.
Do not look into the rear panel fiber optic cable connectors or into the fiber optic
cables themselves.
Ne regardez pas dans les connecteurs de câble fibre optique sur le panneau arrière
ou dans les câbles fibre optique eux-mêmes.
Plug the attached dust caps into the optical transceivers when the fiber cable is
unplugged.
Branchez les protections contre la poussière dans l’ensemble émetteur/récepteur
lorsque le câble fibre optique est débranché.
System Compatibility
The XTP FT HD 4K is compatible with XTP systems, but the maximum video resolution may
be limited with different XTP devices. See the table below for maximum video resolutions
and refresh rates for various inputs and outputs.
Maximum Resolution and Refresh Rates for XTP Systems
Output
Non-4K 4K Fiber 4K Twisted
Pair
4K PLUS
Input
Analog 1920x1200
@ 60 Hz
1920x1200
@ 60 Hz
1920x1200
@ 60 Hz
1920x1200
@ 60 Hz
Non-4K Digital 2048x1080
@ 60 Hz
2048x1080
@ 60 Hz
2048x1080
@ 60 Hz
2048x1080
@ 60 Hz
4K Fiber 2048x1080
@ 60 Hz
4096x2160
@ 24 Hz
4096x2160
@ 24 Hz
4096x2160
@ 24 Hz
4K Twisted Pair 2048x1080
@ 60 Hz
4096x2160
@ 24 Hz
4096x2160
@ 30 Hz
4096x2160
@ 30 Hz
4K PLUS 2048x1080
@ 60 Hz
4096x2160
@ 24 Hz
4096x2160
@ 30 Hz
4096x2160
@ 60 Hz
Cable Transmission
The device is further categorized by the type of fiber optic cable, multimode (MM) or
singlemode (SM), which defines the effective range of transmission:
Multimode — Long distance, up to 500 m (1,640 feet) depending on the fiber cable
Singlemode — Very long distance, up to 10 km (6.21 miles)
NOTES:
The multimode and singlemode models are physically and functionally identical with
the exception of the effective range of transmission.
Different modes are not compatible with each other.
A color-coded sticker identifies the type of SFP module: orange for multimode and
yellow for singlemode.
XTP FT HD 4K Fiber Transmitter • Introduction 3
Control Methods
To directly control the device, use one of the following methods:
Simple Instruction Set (SIS) commands (see SIS Configuration and Control on
page 13)
XTP System Configuration Software (see Configuration Software no page 18)
Certain features can also be controlled through an XTP matrix switcher (see the XTP matrix
switcher user guide at www.extron.com).
NOTE: If the XTP FT HD 4K is connected to an XTP matrix switcher, configure it through
the XTP matrix switcher (se the XTP matrix switcher user guide for SIS command or
the XTP System Configuration Help File for software details).
Features
XTP Interconnection Features
Reliable cable infrastructure — Transmits video, audio, bidirectional
RS-232 and IR, and Ethernet over a fiber optic cable.
Fiber optic cable compatibility — Supports maximum performance over long
distances.
Bidirectional RS-232 and IR insertion for AV control — Allows remote AV devices
to be controlled without the need for additional cabling.
Ethernet extension — Reduces independent network drops required within a system
with centralized 10/100 Ethernet communication.
Signal and link status LED indicators for XTP ports — Provides a means for
validating signal flow and operation from transmitter to receiver, allowing quick
identification of connectivity issues.
Video Features
Computer and video resolutions — Supports up to 4K (4096x2160 @ 24 Hz) at
4:4:4 color sampling over one fiber cable.
HDMI specification features — Include data rates up to 10.2 Gbps, Deep Color up
to 12-bit, 3D, and HD lossless audio formats.
HDCP compliance — Ensures display of content-protected media and interoperability
with other HDCP-compliant devices.
HDMI loop-through with selectable audio control — Features an active HDMI
output with support for embedded audio for connection to a local monitor.
Audio Features
Multiple embedded audio formats — Supports a broad range of multi-channel audio
signals, providing reliable operation with HDMI sources.
Selectable analog stereo audio input embedding — Supports balanced or
unbalanced audio for extended transmission by embedding stereo audio into the signal
stream. This feature enables direct connection of separate stereo audio signals from a
laptop, Blu-ray Disc™ player, or other device.
Audio input gain and attenuation adjustment — Sets the level of gain or
attenuation, eliminating noticeable volume differences when switching between sources.
XTP FT HD 4K Fiber Transmitter • Introduction 4
Control Features
Front panel USB configuration port — Provides convenient access for setup,
configuration, and firmware updates.
Extron XTP System Configuration Software compatibility — Allows for easy setup
and commissioning.
General Features
XTP compatibility — Provides a flexible signal switching and distribution solution that
is completely integrated, ensuring reliable routing of multiple digital and analog formats.
EDID Minder — Automatically manages EDID communication between connected
devices. It ensures that all sources power up properly and reliably outputs content for
display.
Key Minder — Authenticates and maintains continuous HDCP encryption between
input and output devices to ensure quick and reliable switching in professional AV
environments, while enabling simultaneous distribution of a single source signal to one
or more displays.
HDCP visual confirmation — Provides a green signal when encrypted content is
sent to a non-compliant display, providing immediate visual confirmation that protected
content cannot be viewed on the display.
EDID and HDCP transmission support — Actively buffers DDC channels, allowing
continuous communication between source and display.
Internal color bars test pattern — Helps with setup and calibration.
User-selectable HDCP authorization — Allows individual inputs to appear HDCP
compliant or non-HDCP compliant to the connected source, which is beneficial if the
source automatically encrypts all content when connected to an
HDCP-compliant device. Protected material is not passed in non-HDCP mode.
LED indicators — Provide visual indication of signal presence, HDCP, selected audio
input format, audio signal clipping, and power.
Lockit HDMI cable lacing brackets — Secure HDMI cables to the HDMI connectors.
1" (2.5 cm) high, half rack width metal enclosure — Allows for discreet placement
and concealment.
Highly reliable, energy-efficient external universal power supply included
Provides worldwide power compatibility, with high demonstrated reliability and low
power consumption for reduced operating costs.
XTP FT HD 4K Fiber Transmitter • Installation 5
Installation
This section contains the installation procedures and operation methods for the
XTP FT HD 4K. Topics in this section include:
Rear Panel Connectors
Connection Details
Rear Panel Connectors
A
HDMI input connector
B
HDMI loop-through connector
C
Analog audio input connector
D
RS-232 and IR Over XTP connector
(see next page)
E
XTP output connector (see next
page)
F
LAN connector (see next page)
G
Power connector and LED (see next
page)
Figure 2. XTP FT HD 4K Rear Panel Connectors
Transmitter inputs
NOTES:
For HDMI cables, the maximum cable length is 15 feet (4.6 meters).
Use Extron LockIt Cable Lacing Brackets to secure HDMI connectors to the device
(see HDMI Connection on page 7).
A
HDMI input connector — Connect a digital video source device to the HDMI input
connector. It accepts HDMI, DVI (with an appropriate adapter), or dual mode DisplayPort
video sources.
B
HDMI loop-through connector — Connect a digital video display to the HDMI
loop-through connector for a local display of the HDMI input (see HDMI Audio Switch
on page 11 to select local audio output options). A display that is not HDCP-compliant
displays a green screen when HDCP encrypted content is sent to it.
C
Analog audio input connector — Connect an audio source to the 5-pole captive screw
connectors. Wire the connector as shown in figure 3.
Unbalanced Audio Input
Balanced Audio Input
Tip
Ring
Tip
Ring
Slee
ves
Tip
Sleeve
Sleeve
Tip
LR
LR
Do not tin the wires!
Figure 3. Audio Input Wiring
POWER
12V
1.0 A MAX
XTP FT HD 4K
HDMI
AUDIO
AUDIO
SIG LINK LAN
RS-232 IR
L
Tx Rx Tx Rx
RESET
G
R
ON
OFF
LOOP THRU
XTP OUTOVER XTPINPUTS
ABCD EFG
XTP FT HD 4K Fiber Transmitter • Installation 6
Transmitter XTP interconnection
D
RS-232 Over XTP connector To pass bidirectional serial or other control signals
between XTP-compatible devices, connect a control device to the 5-pole captive screw
connector. The connector includes only the two poles labeled “RS-232” and shares the
ground pole with the IR poles.
IR Over XTP connector — To transmit and receive IR signals (up to 56 kHz), connect
a control device to the 5-pole captive screw connector. This port includes the two poles
labeled “IR” and shares the ground pole with the RS-232 poles.
NOTE: RS-232 and IR data can be transmitted simultaneously (see RS-232 and IR
Communication on page 8 for wiring details).
E
XTP output connector — Connect an XTP fiber receiver or matrix switcher to the XTP
fiber output connector.
WARNING: Potential risk of severe injury. The XTP FT HD 4K outputs
continuous invisible light, which may be harmful to the eyes; use with caution.
AVERTISSEMENT : Risque potentiel de blessure grave ou de mort. Le
XTP FT HD 4K émet une lumière invisible en continu qui peut être dangereux pour
les yeux, à utiliser avec précaution.
Do not look into the rear panel fiber optic cable connectors or into the fiber
optic cables themselves.
Ne regardez pas dans les connecteurs de câble fibre optique sur le panneau
arrière ou dans les câbles fibre optique eux-mêmes.
Plug the attached dust caps into the optical transceivers when the fiber cable is
unplugged.
Branchez les protections contre la poussière dans l’ensemble
émetteur/récepteur lorsque le câble fibre optique est débranché.
NOTE: Ensure the proper fiber optic cable is used. Typically, singlemode fiber optic
cable has a yellow jacket and multimode fiber optic cable has an orange or aqua
jacket.
F
LAN connector — Connect a control device or device to be controlled to the
pass-through LAN connector for 10/100Base-T Ethernet communication. LEDs on the
connector indicate link and activity status.
Transmitter power
G
Power connector and LED — Connect the external 12 V, 1.5 A power supply to the
2-pole captive screw connector. For wiring considerations, see Power Connection on
page 8. The Power LED lights to indicate the device is receiving power.
XTP FT HD 4K Fiber Transmitter • Installation 7
Connection Details
HDMI Connection
To secure the HDMI cable to the HDMI input connector, use an Extron LockIt Cable Lacing
Bracket and a tie wrap.
3
1
2
3
4
5
Figure 4. Installing the LockIt Cable Lacing Bracket
1. Plug the HDMI cable into the panel connection (see figure 4,
1
).
2. Loosen the HDMI connection mounting screw from the panel (
2
) enough to allow the
LockIt to be placed over it. The screw does not have to be removed.
3. Place the LockIt on the screw and against the HDMI connector (
3
), and then tighten
the screw to secure the bracket.
4. Loosely place the included tie wrap around the HDMI connector and the LockIt (
4
).
5. While holding the connector securely against the cable lacing bracket, use pliers or
similar tools to tighten the tie wrap, then remove any excess length (
5
).
ATTENTION:
Connect and pull the tie wraps until they are secure. Do not overtighten.
Connectez et tirez les serre-câbles jusqu’à ce qu’ils soient sécurisés. Ne pas
trop serrer.
XTP FT HD 4K Fiber Transmitter • Installation 8
RS-232 and IR Communication
The RS-232 and IR Over XTP connector is for pass-through transmission of serial signals,
such as projector control signals, and infrared data. To pass bidirectional serial command
signals between XTP-compatible devices, connect a control device to the three poles
(Tx, Rx, and G) under “RS-232” of the 5-pole captive screw connector. To transmit and
receive IR signals, connect a control device to the three poles (G, Tx, and Rx) under “IR.”
The ground (G) pole is shared.
NOTE: RS-232 and IR data can be transmitted or received simultaneously (see figure 5
for wiring considerations).
Tx/Rx
Pins
RxTx
RS-232 IR
RxTx
TxRx
RxTx
IR Device
RS-232 Device
G
G
G
Figure 5. RS-232 and IR Over XTP Connector Wiring Configuration
ATTENTION: The length of the exposed wires in the stripping process is important.
ATTENTION : La longueur des câbles exposés est importante lorsque l’on entreprend de
les dénuder.
The ideal length is 3/16 inch (5 mm).
La longueur idéale est de 5mm (3/16inches).
Any longer and the exposed wires may touch, causing a short circuit between them.
S’ils sont un peu plus longs, les câbles exposés pourraient se toucher et provoquer
un court circuit.
Any shorter and the wires can be easily pulled out even if tightly fastened by the
captive screws.
S’ils sont un peu plus courts, ils pourraient sortir, même s’ils sont attachés par les vis
captives.
Power Connection
Apply power to the transmitter locally with the provided power supply (if necessary, see
figure 6 for wiring considerations).
Power Supply
Output Cord
Captive Screw
Connector
SECTION A–A
Ridges
Smooth
AA
Tie Wrap
3
5
Figure 6. Power Wiring
See the notifications on the next page for other considerations.
XTP FT HD 4K Fiber Transmitter • Installation 9
WARNING: The wires must be kept separate while the power supply is plugged in.
Remove power before wiring.
AVERTISSEMENT : Les deux cordons d’alimentation doivent être tenus à l’écart l’un
de l’autre quand l’alimentation est branchée. Couper l’alimentation avant de faire
l’installation électrique.
ATTENTION:
This product is intended to be supplied by a UL Listed Power Unit marked
“Class 2” or “LPS,” rated 12 VDC, 1.0 A minimum. Always use a power supply
supplied by or specified by Extron. Use of an unauthorized power supply voids all
regulatory compliance certification and may cause damage to the supply and the
unit.
Ce produit est destiné à une utilisation avec une source d’alimentation listéeUL
avec l’appellation «Classe2» ou «LPS» et normée 12Vcc, 1,0A minimum.
Utilisez toujours une source d’alimentation fournie par Extron. L’utilisation d’une
source d’alimentation non autorisée annule toute conformité réglementaire et peut
endommager la source d’alimentation ainsi que l’unité.
Unless otherwise stated, the AC/DC adapters are not suitable for use in air handling
spaces or in wall cavities. The installation must always be in accordance with the
applicable provisions of National Electrical Code ANSI/NFPA 70, article 725 and
the Canadian Electrical Code part 1, section 16. The power supply shall not be
permanently fixed to a building structure or similar structure.
Sauf mention contraire, les adaptateurs AC/DC ne sont pas appropriés pour
une utilisation dans les espaces d’aération ou dans les cavités murales. Cette
installation doit toujours être en accord avec les mesures qui s’applique au National
Electrical Code ANSI/NFPA70, article725, et au Canadian Electrical Code,
partie1, section16. La source d’alimentation ne devra pas être fixée de façon
permanente à une structure de bâtiment ou à une structure similaire.
Power supply voltage polarity is critical. Incorrect voltage polarity can damage the
power supply and the unit. The ridges on the side of the cord identify the power
cord negative lead.
La polarité de la source d’alimentation est primordiale. Une polarité incorrecte
pourrait endommager la source d’alimentation et l’unité. Les stries sur le côté du
cordon permettent de repérer le pôle négatif du cordon d’alimentation.
The length of the exposed (stripped) copper wires is important. The ideal length is
3/16 inch (5 mm).
La longueur des câbles exposés est primordiale lorsque l’on entreprend de les
dénuder. La longueur idéale est de 5 mm (3/16 inch).
TIP: Do not tin the stripped power supply leads. Tinned wires are not as secure in the
captive screw connectors and could be pulled out.
XTP FT HD 4K Fiber Transmitter • Operation 10
Operation
After all transmitters and their connected devices are powered up, the system is fully
operational. If any problems are encountered, verify that the cables are routed and
connected properly. If problems persist, call the Extron S3 Sales & Technical Support Hotline
(see the contact numbers on the last page of this guide for the nearest Extron office).
This section contains information about the local operation of the XTP FT HD 4K as well as
the operational indicators. Topics in this section include the following:
Transmitter Front Panel Features
HDMI Audio Switch
EDID
Audio Output Overview
Reset Modes
Transmitter Front Panel Features
Figure 7. XTP FT HD 4K Front Panel Features
A
Power LED indicator — Lights when power is applied to the device from the power
supply. There are two Power LED indicators, one on the front panel and one on the rear
panel (see figure 2,
G
on page 5).
B
Configuration connector — Connect a host device to the female USB mini-B
connector to configure the connected transmitter or update firmware.
C
Input LED indicators
Signal — Lights when an active video signal is detected from the source.
HDMI Audio — Lights when the HDMI audio input is selected.
HDCP — Lights when the input signal is encrypted.
Analog Audio — Lights when the analog audio input is selected.
Audio Signal Clip — Lights when the analog audio input signal remains above
-3 dBFS. The LED remains lit for 200 milliseconds after the signal falls below
-3 dBFS.
XTP FT HD 4K
AUDIO SIGNAL CLIP
HDMI AUDIO
ANALOG AUDIO
SIGNAL
INPUT
Extron
HDCP
CONFIG
AB C
XTP FT HD 4K Fiber Transmitter • Operation 11
HDMI Audio Switch
The rear panel HDMI audio switches mute or unmute the embedded audio on the related
HDMI connector (see figure 2,
B
on page 5). The audio switch affects the audio on the
HDMI loop-thru connector. The LED next to the switch lights when HDMI audio is enabled.
Hold the HDMI audio switch up until the LED lights (about 1 second) to enable
embedded audio on the associated HDMI connector.
Hold the HDMI audio switch down (until the LED turns off (about 1 second) to disable
embedded audio on the associated HDMI connector.
The switch returns to the middle position after it has been released so the device can
continue to be controlled through SIS commands.
EDID
The XTP FT HD 4K can record and save EDID in a user memory location on the transmitter.
EDID can come from the loop-through display on the transmitter. For EDID management,
use the XTP System Configuration Software (see EDID Minder on page 26).
NOTE: In matrix applications, EDID on the transmitter is assigned by the matrix switcher
using the XTP System Configuration Software.
Audio Output Overview
By default, the XTP FT HD 4K prioritizes embedded digital audio over analog audio to send
over the XTP communication. Use SIS commands (see SIS Configuration and Control on
page 13) or the XTP System Configuration Software (see Configuration Software on page
18) to manually select the audio input.
NOTES:
To pass analog audio without video to a display connected to the HDMI output
connector on a connected receiver, the transmitter sends a black video signal to
simulate one of the following video signals:
720p @ 50 Hz
720p @ 60 Hz (default)
1080p @ 60 Hz
To set the black video signal, see the Black video signal SIS commands on
page 15 or Transmitter device settings on page 24.
XTP FT HD 4K Fiber Transmitter • Operation 12
Reset Modes
Use the recessed Reset button (see figure 8,
A
) on the rear panel of the transmitter to
return the device to default settings or to restore factory-shipped firmware.
POWER
12V
1.0A MAX
XTP FT HD 4K
HDMI
AUDIO
AUDIO
SIG LINK LAN
RS-232 IR
L
Tx Rx Tx Rx
RESET
G
R
ON
OFF
LOOP THRU
XTP OUTOVER XTPINPUTS
POWER
12V
--A MAX
XTP FR HD 4K
HDMI
S/PDIF
AUDIOAUDIO
SIG LINK
LAN
RS-232 IR
L
Tx Rx Tx Rx
RESET
G
R12ON
OFF
XTP IN
OVER XTP
OUTPUTS
RELAYS
XTP FT HD 4K
XTP FR HD 4K
A
Figure 8. Reset Button
Rest Mode Summary
Mode Activation Result Purpose/Notes
Factory
Firmware
Reset
(mode 1)
Press and hold the recessed
Reset button while applying power
to the device.
NOTE: After this reset, update
the device with the latest
firmware version. Do not
operate the device with the
firmware version that results
from this mode reset.
The device reverts to the factory
default firmware for a single power
cycle.
NOTE: If this reset was
performed by mistake or
is no longer desired, cycle
power to the device again to
restore the firmware version
running prior to the reset.
Use this reset to return
the firmware to the factory
version temporarily if an
incompatibility issue arises
with the current firmware.
User
Settings
Reset
(mode 5)
Hold down the Reset button until
the Power LED blinks three times
(over approximately 9 seconds).
Then, press the Reset button
again momentarily (<1 second).
The device reverts user settings to
the factory default values (firmware
excluded).
All user configurations reset to
default values including real-time
adjustments.
The front panel Power LED
blinks four times in quick
succession during the reset.
Use this reset to restart with
the default configuration.
This is equivalent to the
ZXXX SIS command (see the
Reset mode SIS command
on page 17).
XTP FT HD 4K Fiber Transmitter • SIS Configuration and Control 13
SIS Configuration
and Control
This section contains SIS communication details and SIS commands and responses when
the host device is connected directly to an XTP FT HD 4K. Topics in this section include the
following:
Host Device Connection
SIS Overview
Command and Response Table
Host Device Connection
Use a connected computer running the Extron DataViewer utility to send and receive SIS
commands and responses. To connect directly to an XTP FT HD 4K, connect the computer
to the front panel USB configuration connector (see figure 7,
B
on page 10).
SIS Overview
Host and Device Communication
SIS commands consist of one or more characters per field. No special characters are
required to begin or end a command sequence. When the XTP FT HD 4K determines that
a command is valid, it executes the command and sends a response to the host device.
All responses from the transmitter to the host device end with a carriage return and a line
feed (CR/LF = ]), which signals the end of the response character string. A string is one or
more characters.
Error Responses
If the transmitter determines a command is invalid or contains invalid parameters, it returns
an error response to the host. The following error codes may apply to either device:
E01 = Invalid input number E14 = Not valid for this configuration
E10 = Invalid command E17 = Invalid command for signal type
E12 = Invalid port number E22 = Busy
E13 = Invalid parameter
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37

Extron electronics XTP FT HD 4K User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI