User Guide
XTP T USW 103
XTP Systems
Three Input Switcher
with an Integrated XTP Transmitter
68-2292-01 Rev. H
01 1
9
Safety Instructions
Safety Instructions • English
WARNING: This symbol, ,when used on the product, is
intended to alert the user of the presence of uninsulated dangerous
voltage within the product’s enclosure that may present a risk of electric
shock.
ATTENTION: This symbol, , when used on the product, is intended
to alert the user of important operating and maintenance (servicing)
instructions in the literature provided with the equipment.
For information on safety guidelines, regulatory compliances, EMI/EMF
compatibility, accessibility, and related topics, see the Extron Safety and
Regulatory Compliance Guide, part number 68-290-01, on the Extron
website, www.extron.com.
Sicherheitsanweisungen • Deutsch
WARNUNG: Dieses Symbol auf dem Produkt soll den Benutzer
darauf aufmerksam machen, dass im Inneren des Gehäuses dieses
Produktes gefährliche Spannungen herrschen, die nicht isoliert sind und
die einen elektrischen Schlag verursachen können.
VORSICHT: Dieses Symbol auf dem Produkt soll dem Benutzer in
der im Lieferumfang enthaltenen Dokumentation besonders wichtige
Hinweise zur Bedienung und Wartung (Instandhaltung) geben.
Weitere Informationen über die Sicherheitsrichtlinien, Produkthandhabung,
EMI/EMF-Kompatibilität, Zugänglichkeit und verwandte Themen finden Sie in
den Extron-Richtlinien für Sicherheit und Handhabung (Artikelnummer
68-290-01) auf der Extron-Website, www.extron.com.
Instrucciones de seguridad • Español
ADVERTENCIA: Este símbolo, , cuando se utiliza en el producto,
avisa al usuario de la presencia de voltaje peligroso sin aislar dentro del
producto, lo que puede representar un riesgo de descarga eléctrica.
ATENCIÓN: Este símbolo, , cuando se utiliza en el producto, avisa
al usuario de la presencia de importantes instrucciones de uso y
mantenimiento recogidas en la documentación proporcionada con el
equipo.
Para obtener información sobre directrices de seguridad, cumplimiento
de normativas, compatibilidad electromagnética, accesibilidad y temas
relacionados, consulte la Guía de cumplimiento de normativas y seguridad
de Extron, referencia 68-290-01, en el sitio Web de Extron, www.extron.com.
Instructions de sécurité • Français
AVERTISSEMENT : Ce pictogramme, , lorsqu’il est utilisé sur le
produit, signale à l’utilisateur la présence à l’intérieur du boîtier du
produit d’une tension électrique dangereuse susceptible de provoquer
un choc électrique.
ATTENTION : Ce pictogramme, , lorsqu’il est utilisé sur le produit,
signale à l’utilisateur des instructions d’utilisation ou de maintenance
importantes qui se trouvent dans la documentation fournie avec le
matériel.
Pour en savoir plus sur les règles de sécurité, la conformité à la
réglementation, la compatibilité EMI/EMF, l’accessibilité, et autres sujets
connexes, lisez les informations de sécurité et de conformité Extron, réf.
68-290-01, sur le site Extron, www.extron.com.
Istruzioni di sicurezza • Italiano
AVVERTENZA: Il simbolo, , se usato sul prodotto, serve ad
avvertire l’utente della presenza di tensione non isolata pericolosa
all’interno del contenitore del prodotto che può costituire un rischio di
scosse elettriche.
ATTENTZIONE: Il simbolo, , se usato sul prodotto, serve ad
avvertire l’utente della presenza di importanti istruzioni di funzionamento
e manutenzione nella documentazione fornita con l’apparecchio.
Per informazioni su parametri di sicurezza, conformità alle normative,
compatibilità EMI/EMF, accessibilità e argomenti simili, fare riferimento
alla Guida alla conformità normativa e di sicurezza di Extron, cod. articolo
68-290-01, sul sito web di Extron, www.extron.com.
Instrukcje bezpieczeństwa • Polska
OSTRZEŻENIE: Ten symbol, , gdy używany na produkt, ma na celu
poinformować użytkownika o obecności izolowanego i niebezpiecznego
napięcia wewnątrz obudowy produktu, który może stanowić zagrożenie
porażenia prądem elektrycznym.
UWAGI: Ten symbol, , gdy używany na produkt, jest przeznaczony do
ostrzegania użytkownika ważne operacyjne oraz instrukcje konserwacji
(obsługi) w literaturze, wyposażone w sprzęt.
Informacji na temat wytycznych w sprawie bezpieczeństwa, regulacji
wzajemnej zgodności, zgodność EMI/EMF, dostępności i Tematy pokrewne,
zobacz Extron bezpieczeństwa i regulacyjnego zgodności przewodnik, część
numer 68-290-01, na stronie internetowej Extron, www.extron.com.
Инструкция по технике безопасности • Русский
ПРЕДУПРЕЖДЕНИЕ: Данный символ, , если указан
на продукте, предупреждает пользователя о наличии
неизолированного опасного напряжения внутри корпуса
продукта, которое может привести к поражению электрическим
током.
ВНИМАНИЕ: Данный символ, , если указан на продукте,
предупреждает пользователя о наличии важных инструкций
по эксплуатации и обслуживанию в руководстве,
прилагаемом к данному оборудованию.
Для получения информации о правилах техники безопасности,
соблюдении нормативных требований, электромагнитной
совместимости (ЭМП/ЭДС), возможности доступа и других
вопросах см. руководство по безопасности и соблюдению
нормативных требований Extron на сайте Extron: ,
www.extron.com, номер по каталогу - 68-290-01.
安全说明 • 简体中文
警告： 产品上的这个标志意在警告用户该产品机壳内有暴露的危险 电压，
有触电危险。
注意： 产品上的这个标志意在提示用户设备随附的用户手册中有
重要的操作和维护(维修）说明。
关于我们产品的安全指南、遵循的规范、EMI/EMF 的兼容性、无障碍
使用的特性等相关内容，敬请访问 Extron 网站 , www.extron.com，参见
Extron 安全规范指南，产品编号 68-290-01。
안전 지침 • 한국어
경고: 이 기호 가 제품에 사용될 경우, 제품의 인클로저 내에 있는
접지되지 않은 위험한 전류로 인해 사용자가 감전될 위험이 있음을
경고합니다.
주의: 이 기호 가 제품에 사용될 경우, 장비와 함께 제공된 책자에 나와
있는 주요 운영 및 유지보수(정비) 지침을 경고합니다.
안전 가이드라인, 규제 준수, EMI/EMF 호환성, 접근성, 그리고 관련 항목에
대한 자세한 내용은 Extron 웹 사이트(www.extron.com)의 Extron 안전 및
규제 준수 안내서, 68-290-01 조항을 참조하십시오.
安全記事 • 繁體中文
警告: 若產品上使用此符號，是為了提醒使用者，產品機殼內存在著
可能會導致觸電之風險的未絕緣危險電壓。
注意 若產品上使用此符號，是為了提醒使用者，設備隨附的用戶手冊中有
重要的操作和維護（維修）説明。
有關安全性指導方針、法規遵守、EMI/EMF 相容性、存取範圍和相關主題的詳細資
訊，請瀏覽 Extron 網站：www.extron.com，然後參閱《Extron 安全性與法規
遵守手冊》，準則編號 68-290-01。
安全上のご注意 • 日本語
警告: この記号 が製品上に表示されている場合は、筐体内に絶縁されて
いない高電圧が流れ、感電の危険があることを示しています。
注意:この記号 が製品上に表示されている場合は、本機の取扱説明書に
記載されている重要な操作と保守(整備)の指示についてユーザーの注意
を喚起するものです。
安全上のご注意、法規厳守、EMI/EMF適合性、その他の関連項目に
つ い て は 、エ ク スト ロ ン の ウ ェブ サ イト www.extron.com よ り 『 Extron Safety
and Regulatory Compliance Guide』 ( P/N 68-290-01) をご覧ください。
Copyright
© 2013-2019 Extron Electronics. All rights reserved. www.extron.com
Trademarks
All trademarks mentioned in this guide are the properties of their respective owners.
The following registered trademarks (
®
), registered service marks (
SM
), and trademarks (
TM
) are the property of RGBSystems, Inc. or
ExtronElectronics (see the current list of trademarks on the Terms of Use page at www.extron.com):
Registered Trademarks
(
®
)
Extron, Cable Cubby, ControlScript, CrossPoint, DTP, eBUS, EDID Manager, EDID Minder, Flat Field, FlexOS, Global Configurator,
GlobalScripter, GlobalViewer, Hideaway, HyperLane, IPIntercom, IPLink, KeyMinder, LinkLicense, LockIt, MediaLink, MediaPort, NetPA,
PlenumVault, PoleVault, PowerCage, PURE3, Quantum, Show Me, SoundField, SpeedMount, SpeedSwitch, SystemINTEGRATOR,
TeamWork, TouchLink, V-Lock, VideoLounge, VN-Matrix, VoiceLift, WallVault, WindoWall, XTP, XTPSystems, and ZipClip
Registered Service Mark
(SM)
: S3 Service Support Solutions
Trademarks
(
™
)
AAP, AFL (Accu-RateFrameLock), ADSP(Advanced Digital Sync Processing), Auto-Image, CableCover, CDRS(ClassD Ripple
Suppression), Codec Connect, DDSP(Digital Display Sync Processing), DMI (DynamicMotionInterpolation), DriverConfigurator,
DSPConfigurator, DSVP(Digital Sync Validation Processing), eLink, EQIP, Everlast, FastBite, FOX, FOXBOX, IP Intercom HelpDesk,
MAAP, MicroDigital, Opti-Torque, PendantConnect, ProDSP, QS-FPC(QuickSwitch Front Panel Controller), Room Agent,
Scope-Trigger, ShareLink, SIS, SimpleInstructionSet, Skew-Free, SpeedNav, StudioStation, Triple-Action Switching, True4K,
Vector™ 4K , WebShare, XTRA, and ZipCaddy
FCC Class A Notice
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part15 of the FCC rules. The ClassA limits provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause interference. This interference must be corrected at the expense of the user.
ATTENTION: The Twisted Pair Extension technology works with unshielded twisted
pair (UTP) or shielded twisted pair (STP) cables; but to ensure FCC Class A and CE
compliance, STP cables and STP Connectors are required.
For more information on safety guidelines, regulatory compliances, EMI/EMF
compatibility, accessibility, and related topics, see the “Extron Safety and Regulatory
Compliance Guide” on the Extron website.
Conventions Used in this Guide
Notifications
The following notifications are used in this guide:
WARNING: Potential risk of severe injury or death.
AVERTISSEMENT : Risque potentiel de blessure grave ou de mort.
ATTENTION:
• Risk of property damage.
• Risque de dommages matériels.
NOTE: A note draws attention to important information.
TIP: A tip provides a suggestion to make working with the application easier.
Software Commands
Commands are written in the fonts shown here:
^AR Merge Scene,,0p1 scene 1,1 ^B 51 ^W^C.0
[01] R 0004 00300 00400 00800 00600 [02] 35 [17] [03]
E X! *X1&* X2)* X2#* X2! CE}
NOTE: For commands and examples of computer or device responses used in this
guide, the character “0” is used for the number zero and “O” is the capital letter
“o.”
Computer responses and directory paths that do not have variables are written in the font
shown here:
Reply from 208.132.180.48: bytes=32 times=2ms TTL=32
C:\Program Files\Extron
Variables are written in slanted form as shown here:
ping xxx.xxx.xxx.xxx —t
SOH R Data STX Command ETB ETX
Selectable items, such as menu names, menu options, buttons, tabs, and field names are
written in the font shown here:
From the File menu, select New.
Click the OK button.
Specifications Availability
Product specifications are available on the Extron website, www.extron.com.
Extron Glossary of Terms
A glossary of terms is available at http://www.extron.com/technology/glossary.aspx.
xXTP T USW 103 Switcher • Contents
Contents
Introduction ...............................................1
Guide Overview ................................................... 1
XTP T USW 103 Switcher Description ................. 1
System Compatibility ........................................... 2
Features .............................................................. 2
Installation .................................................4
Rear Panel Connectors ........................................ 4
Connection Details .............................................. 7
HDMI Connection ............................................ 7
TP Cable Termination and
Recommendations ......................................... 8
Contact Closure Communication ..................... 9
RS-232 and IR Over XTP Communication ..... 10
Power Connection ......................................... 11
Operation .................................................14
Front Panel Features .......................................... 14
Front Panel Operation ........................................ 15
Input Selection ............................................... 15
Front Panel Lockout Mode
(Executive Mode) .......................................... 15
Auto Switch Mode ......................................... 15
Normal Switch Mode ..................................... 15
EDID .................................................................. 16
Reset Mode ....................................................... 16
SIS Configuration and Control .................17
Host Device Connection .................................... 17
SIS Overview ..................................................... 17
Host-to-Device and Device-to-Host
Communication ............................................ 17
Device-Initiated Message ............................... 17
Error Responses ............................................ 18
Using Command and Response Tables
for SIS Commands ....................................... 18
Symbol Definitions ......................................... 18
Command and Response Tables for SIS
Commands ...................................................... 19
Input Commands ........................................... 19
Audio Configuration Commands .................... 19
Picture Adjustment Commands
(Analog Only) ................................................ 20
Preset Commands ......................................... 20
EDID Commands ........................................... 21
Advanced Configuration Commands ............. 21
XTP System Configuration Software ........23
Software Installation........................................... 23
Software Download Center Page ................... 23
Software Product Page .................................. 24
Software Operation............................................ 25
Connections .................................................. 25
Menu Bar ...................................................... 26
Device Settings .............................................. 29
EDID Minder .................................................. 35
Reference Information ............................. 37
Mounting ........................................................... 37
Tabletop Mounting ......................................... 37
Furniture Mounting......................................... 37
Rack Mounting .............................................. 37
XTP T USW 103 Switcher • Contents xi
XTP T USW 103 Switcher • Introduction 1
Introduction
This section contains general information about this guide and the Extron XTP T USW 103
Switcher. Topics in this section include:
• Guide Overview
• XTP T USW 103 Switcher Description
• Features
Guide Overview
This guide provides installation, operation, control, and reference information for the
XTP T USW 103 Switcher. In this guide, the terms “switcher” and “XTP T USW 103” are
used interchangeably to refer to the XTP T USW 103 Switcher.
XTP T USW 103 Switcher Description
The Extron XTP T USW 103 is a three input universal switcher with an integrated XTP
transmitter that sends HDMI or digitized analog video, audio, bidirectional RS-232 and IR,
and Ethernet up to 330 feet (100 meters) over a single shielded twisted pair cable (STP). It is
HDCP compliant, and supports 1080p @ 60 Hz Deep Color and 1920x1200 signals. The
XTP T USW 103 works with XTP Systems for signal distribution and long-distance
transmission between remote endpoints.
It can be powered locally or remotely through an Extron XTP Power Injector or XTP matrix
switcher (see Power Connection on page 11).
To configure and control the XTP T USW 103 locally, connect a computer to the USB
configuration port and either enter Extron Simple Instruction Set (SIS) commands (see SIS
Configuration and Control on page 17) or use the Extron XTP System Configuration
Software (see XTP System Configuration Software on page 23).
XTP T USW 103 Switcher • Introduction 2
The following diagram shows one way the XTP T USW 103 can be integrated in an XTP
point-to-point application. The switcher can also be used with an XTP matrix switcher
(see the XTP matrix switcher user guide for more details on matrix applications and
configuration).
X
TP T USW 103
C
O
NF
I
G
MO
DE
N
ORMA
L
Extron
XTP T USW 103
Extron
XTP SR HDMI
VGA
Cable
VGA
Cable
HDMI
Cable
DVI-HDMI
Cable
HDMI
Cable
DVI
Cable
Audio
Cable
Audio
Cable
XTP
Cable (330')
HDMI
Cable
E
xtron
XTP T USW 103
Audi
o
C
able
HDCP
SIGNAL
AUTO
SWITCH
XTP T USW 103
CONFIG
1
2
3
1
2
3
STATUS
MODE
NORMAL
AUTO
X
TP T USW 103
C
O
NF
I
G
MO
DE
N
ORMA
L
E
xtro
n
XTP SR HDM
I
XTP
HDCP
SIGNAL
AUDIO
HDMI
HBR
S/PDIF
BITSTREAM
ANALOG
LPCM
XTP SR HDMI
MENU ENTER
ADJUST
CONFIG
ADJ
X
TP
ST
Projector
XTP
HDC
P
SIGNAL
AUDIO
HDMI
HB
R
S/
PDIF
BITSTREA
M
ANA
L
OG
LPCM
XTP SR HD
MI
MENU EN
TER
AD
JUST
CONFI
G
AD
JU
XTP
ST
Extron
Cable Cubby
C
onference Ta ble
Figure 1. Typical XTP T USW 103 Point-to-Point Application
System Compatibility
The XTP T USW 103 is compatible with XTP systems, but the maximum video resolution
may be limited with different XTP devices (see the table below for maximum video
resolutions and refresh rates for various XTP systems).
Output
Non-4K 4K Fiber 4K PLUS
Input
Analog 1920x1200 @ 60 Hz 1920x1200 @ 60 Hz 1920x1200 @ 60 Hz
Non-4K Digital 2048x1080 @ 60 Hz 2048x1080 @ 60 Hz 2048x1080 @ 60 Hz
4K Fiber 2048x1080 @ 60 Hz 4096x2160 @ 24 Hz 4096x2160 @ 24 Hz
4K PLUS 2048x1080 @ 60 Hz 4096x2160 @ 24 Hz 4096x2160 @ 60 Hz
Features
• Reliable cable infrastructure — Provides high reliability and maximum performance
on an economical and easily installed cable infrastructure.
• Support for Computer-video to 1920x1200, including HDTV 1080p/60 —
Maintains superior image quality at the highest resolutions.
• Shielded twisted pair cable compatibility — Optimized for use with common
shielded twisted pair cable types. XTP systems fully support a maximum transmission
distance of 330 feet (100 meters) for all compatible resolutions when used with shielded
twisted pair cable. Shielded twisted pair cabling with solid center conductor sizes of 24
AWG or better is recommended for optimal performance.
• Bidirectional RS-232 and IR insertion — Allows a remote display to be controlled
without the need for additional cabling through bidirectional RS-232 control and IR
signals inserted into the XTP output.
XTP T USW 103 Switcher • Introduction 3
• Digital conversion of analog input signals — Analog signals are digitized, ensuring
that a reliable, high quality digital video signal is sent to the output destination.
• Auto-input switching — Can be set to automatically switch to the highest or lowest
priority input with an active video signal for simplified operation.
• HDMI specification features — Support data rates up to 6.75 Gbps, Deep Color up
to 12-bit, 3D, and HD lossless audio formats.
• User-selectable HDCP authorization — Allows individual inputs to appear HDCP
compliant or non-HDCP compliant to the connected source, which is beneficial if the
source automatically encrypts all content when connected to an HDCP-compliant
device. Protected material is not passed in non-HDCP mode.
• EDID Minder — Automatically manages EDID communication between connected
devices. It ensures that all sources power up properly and reliably outputs content for
display.
• Key Minder — Authenticates and maintains continuous HDCP encryption between
input and output devices to ensure quick and reliable switching in professional AV
environments, while enabling simultaneous distribution of a single source signal to one
or more displays.
• Multiple embedded audio formats — Provides reliable operation with HDMI sources,
compatible with a broad range of multi-channel audio signals.
• Selectable analog stereo audio input embedding — Supports unbalanced audio
for extended transmission. This feature enables direct connection of separate stereo
audio signals from a laptop, Blu-ray Disc™ player, or other device.
• Audio input gain and attenuation — Allows the level of gain or attenuation to be set,
eliminating noticeable volume differences when switching between sources.
• Ethernet extension — Centralized 10/100Base-T Ethernet communication can be
implemented via an Ethernet pass-through port to reduce the amount of independent
network drops required within a system.
• Remote power capability — Allows the XTP T USW 103 to be powered by an XTP
CrossPoint Matrix Switcher or XTP Power Injectors to simplify integration.
• Internal test patterns — Include five test patterns for calibration and setup.
• RS-232 control — Features an RS-232 serial port for control and configuration.
• Contact closure remote control availability
• XTP system compatibility — Provides a completely integrated solution for multiple
digital and analog formats through XTP integrated system products. XTP is a flexible,
reliable signal switching and distribution system.
• UL 2043 plenum rated — Meets UL 2043 for smoke and heat release for installation
within a plenum airspace above a drop ceiling - power supply excluded. Above-the-
ceiling placement conceals the device to prevent theft, and is convenient for installing
equipment when space inside the room is limited.
XTP T USW 103 Switcher • Installation 4
Installation
This section contains installation procedures for the XTP T USW 103 and wiring details.
Topics in this section include:
• Rear Panel Connectors
• Connection Details
The XTP T USW 103 can be placed on a tabletop or mounted in a rack or under a desk (see
Mounting on page 37).
Rear Panel Connectors
POWER
12V
2
1.0 A MAX
G
1
SIG LINK
LAN
AUDIO
RGB HDMI HDMI
CONTACT
Rx GGTx
RS-232 IR
RxTx
RS-232
Tx Rx
3
123
R
OVER XTP REMOTE
INPUTS
XTP OUT
A
BI
C
DE
FG
H
A
Analog audio input connector
(page 4)
B
Analog video input connector, input 1
(page 5)
C
HDMI input connectors, inputs 2 and 3
(page 5)
D
XTP output connector (page 6)
E
LAN connector (page 6)
F
RS-232 and IR Over XTP connector
(page 6)
G
Contact closure connector (page 6)
H
Remote RS-232 connector (page 7)
I
Power connector and LED (page 7)
Figure 2. XTP T USW 103 Rear Panel Connectors
A
Analog audio input connector — Connect an analog stereo audio source to the
3.5 mm tip-ring-sleeve (TRS) jack.
Tip (+)
Sleeve ( )
Sleeve ( )
Ring (
-
)
Tip (+)
Audio Plugs.eps
RCA Connector
3.5 mm Stereo Plug Connector
(balanced)
Sleeve ( )
Ring (R)
Tip (L)
3.5 mm Stereo Plug Connector
(unbalanced)
Figure 3. Wiring for the Analog Audio Connector
XTP T USW 103 Switcher • Installation 5
By default, audio input is selected automatically (see Audio input selection SIS
commands on page 19 to manually select audio inputs). When input 2 or 3 is
selected with automatic audio input selections, the switcher prioritizes embedded digital
audio. The table below shows the audio format that is sent over the XTP connection
when a specific audio format is not specified.
Selected
Video Input
HDMI Embedded
Audio Present
Analog Audio
Present
Audio Sent Over XTP
VGA N/A Yes Analog audio
VGA N/A No No audio
HDMI Yes No HDMI embedded audio
HDMI Yes Yes HDMI embedded audio
HDMI No Yes Analog audio
HDMI No No No audio
B
Analog video input connector — Connect a video source to the 15-pin HD
connector, labeled input 1 (see figure 2,
B
on the previous page). It accepts RGBHV
video signals.
C
HDMI input connectors — Connect a digital video source device to either or both
female HDMI connectors, labeled inputs 2 and 3 (see figure 2,
C
on the previous
page). They accept HDMI, DVI (with an appropriate adapter), or dual mode DisplayPort
video sources.
NOTES:
• For HDMI cables, the maximum cable length is 15 feet (4.6 meters).
• Use Extron LockIt Cable Lacing Brackets to secure HDMI connectors to the
device (see HDMI Connection on page 7).
XTP T USW 103 Switcher • Installation 6
D
XTP output connector — Connect a twisted pair cable to the RJ-45 connector
labeled XTP OUT on the XTP T USW 103 (see figure 2,
D
on page 4) and the XTP
input connector on another XTP device to pass all signals (see TP Cable Termination
and Recommendations on page 8). This cable carries the following signals:
• Digital video
• Digital audio
• Bidirectional RS-232 and IR commands
• Remote power
• Ethernet communication
• System communication
Signal LED indicator — Lights green when the XTP T USW 103
outputs a video signal or a test pattern.
Link LED indicator — Lights yellow when XTP devices are connected
and communication is established.
ATTENTION:
• Do not connect this connector to a computer data or telecommunications
network.
• Ne connectez pas ce connecteur à un réseau de données informatiques ou à
un réseau de télécommunications.
• XTP remote power is intended for indoor use only. No part of the network that
uses XTP remote power should be routed outdoors (see Remote power on
page 13).
• XTP à distance est destiné à une utilisation en intérieur seulement. Aucune
partie du réseau qui utilise l’alimentation XTP à distance ne peut être routée en
extérieur (voir Remote power à la page 13).
E
LAN connector — Connect a control device or device to be controlled to the RJ-45
connector labeled LAN (see figure 2,
E
on page 4) for 10/100Base-T Ethernet
communication through this pass-through port. LEDs on the connector indicate link and
activity status.
F
RS-232 Over XTP port — To pass bidirectional serial signals between
XTP-compatible devices, connect a control device to the 5-pole captive
screw connector (see figure 2,
F
on page 4). The port includes the
3 poles labeled “RS-232.”
IR Over XTP port — To transmit and receive IR signals (up to 56 kHz),
connect a control device to the 5-pole captive screw connector (see
figure 2,
F
on page 4). This port includes the 2 poles labeled “IR” and
shares the ground pole with the RS-232 port.
NOTE: RS-232 and IR data can be transmitted simultaneously (see RS-232 and IR
Over XTP Communication on page 10 for wiring details).
G
Contact closure connector — Connect an Extron KP 6 Keypad Remote Control or
similar device to the 3.5 mm, 4-pole captive screw connector (see figure 2,
G
on
page 4). The first three ports are used for selecting inputs 1 through 3 when
momentarily shorted to the ground port (see Contact Closure Communication on
page 9 for wiring considerations).
Signa
l
Link
IR
Tx Rx G Tx Rx
RS-232
IR
Tx Rx G Tx Rx
RS-232
XTP T USW 103 Switcher • Installation 7
H
Remote RS-232 connector — Connect a host device to the 3.5 mm, 3-pole captive
screw connector (see figure 2,
H
on page 4) for serial control of the switcher.
Do not tin the wires!
Controlling
Device
Ground (G)
Receive (Rx)
Transmit (Tx)
Ground (G)
Receive (Rx)
Transmit (Tx)
Bidirectional
Tx Rx G
RS-232
Figure 4. Remote RS-232 Wiring
I
Power connector and LED — Connect the external 12 V, 1.0 A power supply to
the 2-pole captive screw connector (see figure 2,
I
on page 4). For wiring
considerations, see Power Connection on page 11. The Power LED lights to
indicate the device is receiving power.
NOTE: The XTP T USW 103 can also be powered remotely (see Remote power
on page 13).
Connection Details
HDMI Connection
To secure the HDMI cable to the HDMI input connector, use an Extron LockIt Cable Lacing
Bracket and a tie wrap.
3
1
2
3
4
5
Figure 5. Installing the LockIt Cable Lacing Bracket
1. Plug the HDMI cable into the panel connection (see figure 5,
1
).
2. Loosen the HDMI connection mounting screw from the panel (
2
) enough to allow the
LockIt to be placed over it. The screw does not have to be removed.
3. Place the LockIt on the screw and against the HDMI connector (
3
), and then tighten
the screw to secure the bracket.
4. Loosely place the included tie wrap around the HDMI connector and the LockIt (
4
).
5. While holding the connector securely against the cable lacing bracket, use pliers or
similar tools to tighten the tie wrap, then remove any excess length (
5
).
ATTENTION:
• Connect and pull the tie wraps until they are secure. Do not overtighten.
• Connectez et tirez les serre-câbles jusqu’à ce qu’ils soient sécurisés. Ne pas
trop serrer.
XTP T USW 103 Switcher • Installation 8
TP Cable Termination and Recommendations
Use the following pin configurations for twisted pair cables.
12345678
RJ-45
Connector
Inser
t Twisted
Pair Wires
Pins:
Pin
1
2
3
4
5
6
7
8
Wire color
White-green
Green
White-orange
Blue
White-blue
Orange
White-brown
Brown
Wire color
T568A T568B
White-orange
Orange
White-green
Blue
White-blue
Green
White-brown
Brown
TIA/EIA-T568B
Pin Wire Color
1 White-orange
2 Orange
3 White-green
4 Blue
5 White-blue
6 Green
7 White-brown
8 Brown
Figure 6. Twisted Pair Cable Termination
Supported cables
The XTP T USW 103 is compatible with shielded twisted pair (F/UTP, SF/UTP, and S/FTP)
and unshielded twisted pair (U/UTP) cables.
ATTENTION:
• Do not use Extron UTP23SF-4 Enhanced Skew-Free AV UTP cable or STP201
cable to link the XTP products.
• N’utilisez pas le câble AV Skew-Free UTP version améliorée UTP23SF d’Extron ou
le câble STP201 pour relier les produits XTP.
• To ensure FCC Class A and CE compliance, STP cables and STP connectors are
required.
• Afin de s’assurer de la compatibilité entre FCC Classe A et CE, les câbles STP et
les connecteurs STP sont nécessaires.
XTP T USW 103 Switcher • Installation 9
Cable recommendations
Extron recommends using the following practices for XTP communication to achieve full
transmission distances up to 330 feet (100 meters) and reduce transmission errors.
• Use the following Extron XTP DTP 24 SF/UTP cables and connectors for the best
performance:
• XTP DTP 24/1000 Non-Plenum 1000’ (305 m) spool 22-236-03
• XTP DTP 24P/1000 Plenum 1000’ (305 m) spool 22-235-03
• XTP DTP 24 Plug Package of 10 101-005-02
• If not using XTP DTP 24 cable, at a minimum, Extron recommends 24 AWG, solid
conductor, STP cable with a minimum bandwidth of 400 MHz.
• Terminate cables with shielded connectors to the TIA/EIA-T568B standard (see figure 6
on the previous page).
• Limit the use of more than two pass-through points, which may include patch points,
punch down connectors, couplers, and power injectors. If these pass-through points
are required, use shielded couplers and punch down connectors.
NOTE: When using STP cable in bundles or conduits, consider the following:
• Do not exceed 40% fill capacity in conduits.
• Do not comb the cable for the first 20 m, where cables are straightened, aligned,
and secured in tight bundles.
• Loosely place cables and limit the use of tie wraps or hook-and-loop fasteners.
• Separate twisted pair cables from AC power cables.
Contact Closure Communication
Each port senses an external switch or contact closure. Use these ports to select an input
on the switcher from a contact closure device. Wire the connector as shown in figure 7.
CONTACT
123G
Ground
Wire Nut
Device 3
Device 2
Device 1
(Switches,
relays, or
similar items)
Switch
1
2
3
G
Heat
Shrink
Over
Shield
Wires
Figure 7. Wiring the Contact Closure Connector
XTP T USW 103 Switcher • Installation 10
RS-232 and IR Over XTP Communication
The RS-232 and IR Over XTP connector is for pass-through transmission of serial signals,
such as projector control signals, and infrared data. To pass bidirectional serial command
signals between XTP-compatible devices, connect a control device to the three poles
(Tx, Rx, and G) under “RS-232” of the 5-pole captive screw connector. To transmit and
receive IR signals, connect a control device to the three poles (G, Tx, and Rx) under “IR.”
The ground (G) pole is shared.
NOTE: RS-232 and IR data can be transmitted or received simultaneously (see figure 8
below for wiring considerations).
Tx/Rx
Pins
RxTx
RS-232
RxTx
TxRx
RxTx
Custom
IR Device
RS-232 Device
G
G
G
IR
Figure 8. Wiring the RS-232 and IR Over XTP Connector
ATTENTION:
• The length of the exposed wires in the stripping process is important.
• La longueur des câbles exposés est importante lorsque l’on entreprend de les
dénuder.
• The ideal length is 3/16 inch (5 mm).
• La longueur idéale est de 5mm (3/16inches).
• Any longer and the exposed wires may touch, causing a short circuit between
them.
• S’ils sont un peu plus longs, les câbles exposés pourraient se toucher et provoquer
un court circuit.
• Any shorter and the wires can be easily pulled out even if tightly fastened by the
captive screws.
• S’ils sont un peu plus courts, ils pourraient sortir, même s’ils sont attachés par les
vis captives.
XTP T USW 103 Switcher • Installation 11
Power Connection
Apply power to the switcher locally with the provided power supply (if necessary, see
figure 9 for wiring considerations) or remotely (through the XTP connector) with a power
injector or a matrix switcher.
Local power
SECTION A–A
AA
Power Supply
Output Cord
2-Pole Captive Screw
Connector
Ridges
Smooth
Tie
Wrap
3/16”
(5 mm) Max.
Figure 9. Power Wiring
The switcher can be powered by a local power supply (see the notifications on the next
page for local power considerations).
XTP T USW 103 Switcher • Installation 12
WARNING: Electric shock hazard. The two power cord wires must be kept separate
while the power supply is plugged in. Remove power before wiring.
AVERTISSEMENT : Risque de choc électrique grave. Les deux cordons
d’alimentation doivent être tenus à l’écart l’un de l’autre quand l’alimentation est
branchée. Couper l’alimentation avant de faire l’installation électrique.
ATTENTION:
• If not provided with a power supply, this product is intended for use with a UL
Listed power source marked “Class 2” or “LPS” rated 12 VDC, 1.0 A minimum,
48 VDC (PoE), minimum 0.35 A, or an Extron UL Listed XTP remote power
source. Always use a power supply supplied by or specified by Extron. Use of an
unauthorized power supply voids all regulatory compliance certification and may
cause damage to the supply and the unit.
• Si le produit n’est pas fourni avec une source d’alimentation, il doit être utilisé
avec une source d’alimentation certifiée UL de classe 2 ou LPS avec une tension
nominale de 12 Vcc, 1 A minimum, 48 Vcc (PoE), 0,35 A minimum, ou une source
d’alimentation à distance XTP Extron certifiée UL. Utilisez toujours une source
d’alimentation fournie par Extron. L’utilisation d’une source d’alimentation non
autorisée annule toute conformité réglementaire et peut endommager la source
d’alimentation ainsi que l’unité.
• Unless otherwise stated, the AC/DC adapters are not suitable for use in air handling
spaces or in wall cavities. The installation must always be in accordance with the
applicable provisions of National Electrical Code ANSI/NFPA 70, article 725 and
the Canadian Electrical Code part 1, section 16. The power supply shall not be
permanently fixed to a building structure or similar structure.
• Sauf mention contraire, les adaptateurs AC/DC ne sont pas appropriés pour
une utilisation dans les espaces d’aération ou dans les cavités murales. Cette
installation doit toujours être en accord avec les mesures qui s’applique au National
Electrical Code ANSI/NFPA 70, article 725, et au Canadian Electrical Code,
partie 1, section 16. La source d’alimentation ne devra pas être fixée de façon
permanente à une structure de bâtiment ou à une structure similaire.
• Power supply voltage polarity is critical. Incorrect voltage polarity can damage the
power supply and the unit. The ridges on the side of the cord identify the power
cord negative lead.
• La polarité de la source d’alimentation est primordiale. Une polarité incorrecte
pourrait endommager la source d’alimentation et l’unité. Les stries sur le côté du
cordon permettent de repérer le pôle négatif du cordon d’alimentation.
• The length of the exposed (stripped) copper wires is important. The ideal length is
3/16 inch (5 mm).
• La longueur des câbles exposés est primordiale lorsque l’on entreprend de les
dénuder. La longueur idéale est de 5 mm (3/16 inch).
TIP: Do not tin the stripped power supply leads. Tinned wires are not as secure in the
captive screw connectors and could be pulled out.
XTP T USW 103 Switcher • Installation 13
Remote power
The XTP T USW 103 can be powered remotely through an XTP Power Injector or through
an XTP matrix switcher.
ATTENTION:
• XTP remote power is intended for indoor use only. No part of the network that uses
XTP remote power should be routed outdoors.
• XTP à distance est destiné à une utilisation en intérieur seulement. Aucune partie
du réseau qui utilise l’alimentation XTP à distance ne peut être routée en extérieur.
Power injector
To power the XTP T USW 103 remotely with an XTP Power Injector, power a connected
receiver locally (see Local power on page 11) and connect an XTP Power Injector to the
XTP cable run along the XTP ports (see the XTP Power Injector User Guide at
www.extron.com for more installation information).
POWER
12V
2
1.0 A MAX
G
1
SIG LINK
XTP OUT
LAN
AUDIO
RGB HDMI HDMI
CONTACT
Rx GGTx
RS-232 IR
RxTx
RS-232
Tx Rx
3
1 2 3
R
OVER XTP REMOTE
INPUTS
LAN
SIG LINK
XTP IN
POWER
12V
HDMI
1A MAX
Rx GTx
RS-232 IR
RxTx
−+−+
LR
1
2
OVER XTP
AUDIO
OFF
ON
S/PDIF
RESET
XTP R HDMI
RELAYS
OUTPUTS
AUDIO
XTP
PWR
XTP PWR
100-240V
50/60 Hz
---A MAX
Power
Extron
XTP R HDMI
XTP Receiver
Extron
XTP PI 100
XTP Power
Injector
Shielded Twisted
Pair Cable
Remote
Power
12V Local Power
Supply
Extron
XTP T USW 103
XTP Transmitter
Figure 10. Typical Point-to-Point Application with Remote Power
NOTE: The power injector provides remote power up to 330 feet with a shielded twisted
pair cable with 24 AWG wire.
XTP matrix switcher
XTP matrix switchers have a fixed amount of power available to provide remote power to
connected XTP devices (see the XTP matrix switcher user guide at www.extron.com for
more details). To manage available power from the XTP matrix switcher, use the XTP System
Configuration Software with the matrix switcher.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
