American Pro Decor 5APD10655 Installation guide

Type
Installation guide

American Pro Decor 5APD10655 is a hardware kit for sliding single wood doors. It is made of 304 grade stainless steel and includes all the necessary components for installing a sliding door, including a 78-3/4" rail, door roller hardware, end brackets, center brackets, bolts, screws, floor anchors, a routed floor guide, door stops, and an adjustable installation wrench. The kit is designed for standard 16" U.S. stud spacing, but the adjustable mounting brackets allow for any variation.

The 5APD10655 is easy to install and can be mounted into solid wood studs or wall blocking.

American Pro Decor 5APD10655 is a hardware kit for sliding single wood doors. It is made of 304 grade stainless steel and includes all the necessary components for installing a sliding door, including a 78-3/4" rail, door roller hardware, end brackets, center brackets, bolts, screws, floor anchors, a routed floor guide, door stops, and an adjustable installation wrench. The kit is designed for standard 16" U.S. stud spacing, but the adjustable mounting brackets allow for any variation.

The 5APD10655 is easy to install and can be mounted into solid wood studs or wall blocking.

• Plumb Line
• Pencil
• Phillips Head Screwdriver
• 10mm Drill Bit
• 5.5mm Drill Bit
• Level
• Tape Measure
• Power Drill
A
B C D
E
F G
H
I
J
K
A
78-3/4" Rail x1
B
Door Roller Hardware x2
C
End Bracket x2
D
Center Bracket x2
E
ST4.8x50 Bolt x4
F
ST5.5x32 Screw x3
G
Floor Anchor x3
H
Routed Floor Guide x1
I
Door Stops x2
J
Adjustable Installation Wrench x1
K
4mm/8mm Allen Keys x1
MODEL No.
5APD10655
American Pro Decor assumes no liability for improper installation.
INSTALLATION MANUAL
TOOLS REQUIRED INCLUDED IN KIT
HARDWARE KIT
FOR SLIDING SINGLE WOOD DOORS
304 Grade Stainless Steel
Wall Blocking
1. To obtain maximum weight capacity, all fasteners
must be mounted into solid wood studs or wall
blocking or mounted to a header board.
2. Adjustable mounting brackets allow for standard
16" U.S. stud spacing, or any variation.
Suggested wall bracket spacing.
Brackets must be secured into wall blocking.
Attach rail to wall as shown.
NOTES
Find the centerline of the track. Using a level, mark
a horizontal line twice the door width long. Mark the
bracket screw locations into the wall blocking.
Attach the wall portion of the brackets as shown.
Consult a structural engineer if you have questions
about what type of wall blocking is required.
American Pro Decor assumes no liability for improper installation.
1. Remove the anti-rise pin and drill holes centered in door thickness. The door should be routed at this time.
2. Mount the rolling straps to the door and position the door on the rail.
Adjust the stops accordingly. Tighten the set screw with
sufcient force to drive the set screw into the bar after
making the nal adjustment.
Plumb the door and mark the positions of the oor
guides. Mount the oor guides to the oor.
American Pro Decor assumes no liability for improper installation.
Adjust the door stops accordingly. Tighten the set screw
with sufcient force to drive the set screw into the bar
after making the nal adjustment.
Reattach the anti-rise pin to the door rollers
American Pro Decor assumes no liability for improper installation.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

American Pro Decor 5APD10655 Installation guide

Type
Installation guide

American Pro Decor 5APD10655 is a hardware kit for sliding single wood doors. It is made of 304 grade stainless steel and includes all the necessary components for installing a sliding door, including a 78-3/4" rail, door roller hardware, end brackets, center brackets, bolts, screws, floor anchors, a routed floor guide, door stops, and an adjustable installation wrench. The kit is designed for standard 16" U.S. stud spacing, but the adjustable mounting brackets allow for any variation.

The 5APD10655 is easy to install and can be mounted into solid wood studs or wall blocking.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI