American Pro Decor 5APD10764 Installation guide

American Pro Decor
Brand
American Pro Decor
Model
5APD10764
Type
Installation guide

American Pro Decor 5APD10764

The American Pro Decor 5APD10764 is a hardware kit for sliding double wood doors. It includes all the necessary components to install sliding double wood doors, including rails, brackets, rollers, floor guides, and door stops. The kit is designed for easy installation and can be used with doors up to 68-7/8" wide.

The kit is made from high-quality materials and is designed for durability and long-lasting performance. The rails are made from steel and are powder-coated for resistance to rust and corrosion. The brackets are made from sturdy steel, and the rollers are made from durable nylon. The floor guides are made from aluminum, and the door stops are made from rubber.

American Pro Decor 5APD10764

The American Pro Decor 5APD10764 is a hardware kit for sliding double wood doors. It includes all the necessary components to install sliding double wood doors, including rails, brackets, rollers, floor guides, and door stops. The kit is designed for easy installation and can be used with doors up to 68-7/8" wide.

The kit is made from high-quality materials and is designed for durability and long-lasting performance. The rails are made from steel and are powder-coated for resistance to rust and corrosion. The brackets are made from sturdy steel, and the rollers are made from durable nylon. The floor guides are made from aluminum, and the door stops are made from rubber.

TOOLS REQUIRED
INCLUDED IN KIT
• Plumb Line
• Pencil
• Phillips Head Screwdriver
• Tape Measure
• Power Drill
• 8mm Routing Drill Bit
• 8mm Drill Bit
• 4mm Drill Bit
• Level
A
B C
D E
F
G
H I J K
A
68-7/8" Rail x2
B
Door Roller Hardware x4
C
Center Bracket x5
D
End Bracket x2
E
ST4.8x50 Bolt x7
F
Splicer Hardware x1
G
4mm/6mm Allen Keys x1
H
ST5.5x32 Screws x6
I
Floor Anchors x6
J
Routed Floor Guides x2
K
Door Stop x4
MODEL No.
5APD10764
INSTALLATION MANUAL
HARDWARE KIT
FOR SLIDING DOUBLE WOOD DOORS
American Pro Decor assumes no liability for improper installation.
Wall Blocking
1. To obtain maximum weight capacity, all fasteners
must be mounted into solid wood studs or wall
blocking or mounted to a header board.
2. Adjustable mounting brackets allow for standard
16" U.S. stud spacing, or any variation.
NOTES
Find the centerline of the track. Using a level, mark
a horizontal line twice the door width long. Mark the
bracket screw locations into the wall blocking.
Attach the wall portion of the brackets as shown.
Consult a structural engineer if you have questions
about what type of wall blocking is required.
American Pro Decor assumes no liability for improper installation.
Remove the anti-rise pin using the provide Allen key. Drill holes in the top of the door from the edge
as pictured to accommodate the door rollers.
The bottom of the doors should be routed at
this time in order to accept the oor guide.
Suggested wall bracket spacing.
Brackets must be secured into wall blocking.
Attach rail to wall as shown.
American Pro Decor assumes no liability for improper installation.
Position the doors on the rail.
Plumb the door and mark the positions of the oor guides. Mount the oor guides to the oor.
American Pro Decor assumes no liability for improper installation.
Adjust the door stops accordingly. Tighten the set screw with sufcient force to drive the set screw into the bar
after making the nal adjustment.
Reattach the anti-rise pin to the door rollers.
American Pro Decor assumes no liability for improper installation.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

American Pro Decor 5APD10764 Installation guide

American Pro Decor
Brand
American Pro Decor
Model
5APD10764
Type
Installation guide

American Pro Decor 5APD10764

The American Pro Decor 5APD10764 is a hardware kit for sliding double wood doors. It includes all the necessary components to install sliding double wood doors, including rails, brackets, rollers, floor guides, and door stops. The kit is designed for easy installation and can be used with doors up to 68-7/8" wide.

The kit is made from high-quality materials and is designed for durability and long-lasting performance. The rails are made from steel and are powder-coated for resistance to rust and corrosion. The brackets are made from sturdy steel, and the rollers are made from durable nylon. The floor guides are made from aluminum, and the door stops are made from rubber.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents