Zoeller 1043-0006 is a submersible sensor utility pump designed for temporary water removal tasks. It is not intended for continuous operation and has a design life of 4,500 accumulated hours. The pump can pump water down to 1/8-inch and has a minimum water depth requirement of 1-3/4-inches. It features an automatic shut-off when the water level drops to 1/8-inch and a built-in timer that turns the pump back on every three minutes to check for water. The pump should be used on a hard surface and should not be placed directly on sand, dirt, or mud.
Zoeller 1043-0006 is a submersible sensor utility pump designed for temporary water removal tasks. It is not intended for continuous operation and has a design life of 4,500 accumulated hours. The pump can pump water down to 1/8-inch and has a minimum water depth requirement of 1-3/4-inches. It features an automatic shut-off when the water level drops to 1/8-inch and a built-in timer that turns the pump back on every three minutes to check for water. The pump should be used on a hard surface and should not be placed directly on sand, dirt, or mud.
Zoeller 1043-0006 is a submersible sensor utility pump designed for temporary water removal tasks. It is not intended for continuous operation and has a design life of 4,500 accumulated hours. The pump can pump water down to 1/8-inch and has a minimum water depth requirement of 1-3/4-inches. It features an automatic shut-off when the water level drops to 1/8-inch and a built-in timer that turns the pump back on every three minutes to check for water. The pump should be used on a hard surface and should not be placed directly on sand, dirt, or mud.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI