Semtech EB-3GSRD Evaluation Board User guide

Brand
Semtech
Model
EB-3GSRD Evaluation Board
Type
User guide
EB-3GSRD
User Guide (GS6152 Reclocker, GS3140 Equalizer, GS2989 Cable Driver)
1 of 20
Semtech
EB-3GSRD
User Guide Rev.0
PDS-061104 August 2015
www.semtech.com
EB-3GSRD
User Guide Rev.0
PDS-061104 August 2015
2 of 20
Semtech
www.semtech.com
Revision History
Contents
1. Hardware Components .................................................................................................................................5
1.1 SDI Inputs and Outputs ....................................................................................................................6
1.1.1 GSPI Interface...........................................................................................................................6
1.2 Power Supplies ....................................................................................................................................6
1.3 Jumpers ..................................................................................................................................................7
1.4 Switch Settings ....................................................................................................................................7
1.5 LED Indicators ......................................................................................................................................8
1.6 Optional Connectors .........................................................................................................................8
2. Getting Started .................................................................................................................................................9
2.1 Software Setup Instructions ...........................................................................................................9
3. Schematics ...................................................................................................................................................... 15
4. Board Layout .................................................................................................................................................. 17
5. Bill of Materials............................................................................................................................................... 18
Version ECO PCN Date Changes and / or Modifications
0 027104 — August 2015 New document.
EB-3GSRD
User Guide Rev.0
PDS-061104 August 2015
3 of 20
Semtech
www.semtech.com
General Description
The EB-3GSRD evaluation package is designed to accelerate the evaluation process of
the GS6152 (a multi-rate serial digital Reclocker with 3Gb/s capability), the GS3140 (a
multi-rate Adaptive Cable Equalizer with 3Gb/s capability), and the GS2989 (a multi-rate
Cable Driver with 3Gb/s capability).
It is strongly recommended to read the GS6152 Data Sheet (PDS-060984) before using
this evaluation kit. Additionally, users should be familiar with the GS3140 Data Sheet
(PDS-060939) and the GS2989 Data Sheet (PDS-052133).
Evaluation Kit Contents
• Semtech EB-3GSRD Evaluation Board
• CD containing EB-3GSRD Evaluation Software, Drivers and Collateral
• 6' Micro USB Cable
Overview
Together with the EB-3GSRD Evaluation Board, this document serves as a guide for
evaluating the GS6152, GS3140 and GS2989 devices. This document contains five main
sections:
1. Hardware Components
2. Getting Started
3. Schematics
4. Board Layout
5. Bill of Materials
The figure below shows a block diagram of the features and the functions of the
EB-3GSRD.
The purpose of the EB-3GSRD dual-channel evaluation board is to evaluate the GS6152
3G video Reclocker (RCLK), the GS3140 3G Equalizer (EQ) and the GS2989 3G Cable
Driver (CD).
The GS6152 is designed to automatically recover the embedded clock from a SMPTE ST
424, SMPTE ST 292, or SMPTE ST 259-C compliant digital video signal, and re-time the
incoming video data. The GS3140 is designed to equalize and restore signals received
over 75Ω coaxial cable, and the GS2989 is designed to drive one to two 75Ω coaxial
cables.
The EB-3GSRD also provides access to the GS6152 and GS3140’s internal registers via
GSPI. Communication to the internal registers is provided via a Micro-USB port on the
board and the 3GSRD GUI.
EB-3GSRD
User Guide Rev.0
PDS-061104 August 2015
4 of 20
Semtech
www.semtech.com
Block Diagram of the EB-3GSRD
GS6152
GS3140 GS2989
LEDs
SPI Control
Micro-USB Port
RCLK and CD
Control
BNC
BNC
BNC
SMA
SMA
SMA
SMA
Power Supply
DDI0
DDI1 DDO1/RCO
DDO0
Control Signal Path
SPI Control Path
Main Signal Path
EB-3GSRD
User Guide Rev.0
PDS-061104 August 2015
5 of 20
Semtech
www.semtech.com
1. Hardware Components
Figure 1-1 and Figure 1-2 show the inputs, outputs and power connections for the
EB-3GSRD.
Figure 1-1: EB-3GSRD Evaluation Board—Top View
Figure 1-2: EB-3GSRD Evaluation Board—Bottom View
LOCK Test Point (TP7)
LOS Test Point (TP5)
SDI Input (J1)
DDI_SEL0 Test Point (TP3)
DDO1_DIS Test Point (TP8)
RST Test Point (TP4)
DDI Input (J3)
DDI Input (J4)
Micro-USB
Port (J2)
USB Connection
Indicator (D5)
RCLK/CD
Control Switch
(SW1)
5V External
Power Header
(TP1 & TP2)
DDO/RCO Output (J7)
DDO/RCO Output (J10)
SDO1 Output (J8)
SDO2 Output (J9)
LED Indicators
(D2-D4)
EQ_1.8V External Power Test Point (TP13)
RCLK_1.8V
External Power
Test Point (TP12)
RCLK_2.5V External Power Test Point (TP14)
EQ_1.8V Regulator Power Jumper (JP2)
RCLK_1.8V Regulator Power Jumper (JP1)
RCLK_2.5V Regulator Power Jumper (JP3)
GS6152
3624E3
1350
GS2989
3257E3
1328
GS3140
3701
1403
+2.5V Regulator (U1) +1.8V Regulator (U2)
Communication Circuit
EB-3GSRD
User Guide Rev.0
PDS-061104 August 2015
6 of 20
Semtech
www.semtech.com
1.1 SDI Inputs and Outputs
The EB-3GSRD features one pair of 100Ω differential inputs through SMA connectors, J3
and J4 (DDI, DDI
) and a single-ended 75Ω input through a BNC connector, J1 (SDI). On
the output side, the EB-3GSRD includes a pair of 100Ω differential outputs through SMA
connectors, J7 and J10 (DDO/RCO,DDO
/RCO) and two single-ended 75Ω outputs
through BNC connectors, J8 and J9 (SDO1,SDO2).
1.1.1 GSPI Interface
The EB-3GSRD features a GSPI interface via Micro-USB connection (J2) which is used to
access all of the GS6152 and GS3140 registers. The SPI interface is automatically enabled
when the Micro-USB is connected to a PC and the GUI is installed. The GS6152 and
GS3140 registers will maintain their settings until the board is powered-down, or reset
via the SPI interface.
1.2 Power Supplies
The default power supply for the EB-3GSRD is provided by the Micro-USB while
connected to a PC(+5V). The Equalizer (GS3140) and Reclocker (GS6152) are powered by
+1.8V. The Cable Driver (GS2989) is powered by +2.5V. There are +1.8V and a +2.5V
on-board regulators used to power up these devices.
The board can also be powered-up externally by connecting a +5V power supply to TP1
(EXT5V) and TP2 (GND).
JP1, JP2 and JP3 need to be connected in order to power-up the board using the
on-board regulators.
Note: The power consumption of the RCLK by disconnecting JP1, JP2 and JP3, can be
monitored by removing JP1, JP2 and JP3, and supplying the correct voltages to the test
points detailed in Table 1-1.
EB-3GSRD
User Guide Rev.0
PDS-061104 August 2015
7 of 20
Semtech
www.semtech.com
1.3 Jumpers
1.4 Switch Settings
There is one dip switch control (SW1) populated on the board, with each bit labelled on
the silk screen. The switches configure the operating mode of the Reclocker and Cable
Driver. The signals can be set HIGH by placing the switch into the “ON” position (closed).
Refer to Table 1-2 below for definitions of the switch settings.
Table 1-1: Jumpers
Jumper Position Description
JP1
1.8V for Reclocker (RCLK_1V8) via on-board
power supply.
1.8V for Reclocker (RCLK_1V8) via external
power supply connected to TP12.
JP2
1.8V for Equalizer (EQ_1V8) via on-board
power supply.
1.8V for Equalizer (EQ_1V8) via external
power supply connected to TP13.
JP3
2.5V for Reclocker (RCLK_2V5) via on-board
power supply.
2.5V for Reclocker (RCLK_2V5) via external
power supply connected to TP14.
Note: Removing the jumpers enables the user to monitor the exact power consumption of
the on-board devices via their respective test points.
Table 1-2: SW1 Positions
Switch Position Label Description HIGH (1) LOW (0)
1 DDI_SEL0 RCLK Input select (0) Input DDI1 selected Input DDI0 selected
2 DDO1_DIS RCLK DDO1 Disable DDO1 Mute On DDO1 Mute Off
3 CD_DIS1 CD SDO1 Disable SDO1 Mute On SDO1 Mute Off
4 CD_DIS2 CD SDO2 Disable SDO2 Mute On SDO2 Mute Off
EB-3GSRD
User Guide Rev.0
PDS-061104 August 2015
8 of 20
Semtech
www.semtech.com
1.5 LED Indicators
The EB-3GSRD features LED indicators which correspond to various status parameters of
the EQ, RCLK, and Micro-USB port. Refer to Table 1-3 below for descriptions of the LED
indicators.
1.6 Optional Connectors
The EB-3GSRD board also features additional test points. Table 1-4 below lists the test
points available on the board.
Table 1-3: EB-3GSRD LED Indicators
Board Component Name Description
D2 EQ LOS
GS3140 Loss Of Signal status. Red when the input signal is invalid and
off when the input signal is valid.
D3 RCLK LOS
GS6152 Loss Of Signal status. Red when the input signal is invalid and
off when the input signal is valid.
D4 RCLK LOCK
GS6152 Lock Detect status signal. Green when the PLL is locked and
off when the PLL is not locked.
D5 Micro-USB connection
Green when the Micro-USB is connected. Off when the USB
connection is terminated.
Table 1-4: EB-3GSRD Board Test Points
Board Component Name
TP3 DDI_SEL0
TP8 DDO1_DIS
TP4 RST
TP7 RCLK_LOCK
TP5 RCLK_LOS
EB-3GSRD
User Guide Rev.0
PDS-061104 August 2015
9 of 20
Semtech
www.semtech.com
2. Getting Started
To evaluate the EB-3GSRD, please follow the steps listed below for a quick start-up:
• Install the EB-3GSRD software GUI
• Connect JP1, JP2, and JP3 to power up the board via micro USB or external power
• Connect J1 to an SDI source using a 75Ω coaxial cable of a supported length. Refer
to the GS3140 data sheet (Doc ID: PDS-060939) for details. You can also connect
one pair of 100Ω differential inputs through SMA connectors, J3 and J4 (DDI, DDI
)
• Monitor the SDI output through J8 or J9, or connect J7 and J10 to scope using 50Ω
coaxial cable
• Connect the EB-3GSRD to a computer using micro USB cable
• Start the EB-3GSRD software GUI
• If required, the GS6152 and GS3140 registers can be modified using the provided
GUI
2.1 Software Setup Instructions
Upon execution of the setup file that is contained within the CD, the following window
will appear as shown in Figure 2-1. To install the software you must click next and follow
the steps listed in the setup window.
Figure 2-1: Welcome Screen
EB-3GSRD
User Guide Rev.0
PDS-061104 August 2015
10 of 20
Semtech
www.semtech.com
Click “I accept the agreement” as shown in Figure 2-2 and then click “Next”.
Figure 2-2: License Agreement
Before continuing with the setup, confirm that you meet the system requirements. Click
“Next”.
Figure 2-3: Software Requirements
EB-3GSRD
User Guide Rev.0
PDS-061104 August 2015
11 of 20
Semtech
www.semtech.com
Now, select the destination where you would like the software GUI to be installed. Click
“Next”.
Figure 2-4: Select Destination Location
Next, select the start menu folder. Click “Next”.
Figure 2-5: Select Start Menu
EB-3GSRD
User Guide Rev.0
PDS-061104 August 2015
12 of 20
Semtech
www.semtech.com
Select if you would like to create a desktop icon (see Figure 2-6), and click “Next”.
Figure 2-6: Select Additional Tasks
Click “Install”.
Figure 2-7: Ready to Install
EB-3GSRD
User Guide Rev.0
PDS-061104 August 2015
13 of 20
Semtech
www.semtech.com
Lastly, check “Launch EB-6GSRD” and click “Finish” to complete the installation and
launch the GUI.
Figure 2-8: Finish Installation
Note: This application requires Microsoft .NET Framework 4.0 to be installed. It can be
downloaded from http://msdn.microsoft.com/en-ca/netframework/default.aspx. The
installer can also download the .NET framework automatically during the installation
process if an internet connection on the PC is available.
After finishing the setup, the main panel from the Semtech EB-6GSRD Host Control
Software will appear, as shown in Figure 2-9.
EB-3GSRD
User Guide Rev.0
PDS-061104 August 2015
14 of 20
Semtech
www.semtech.com
Figure 2-9: EB-3GSRD GUI Main Panel
EB-3GSRD
User Guide Rev.0
PDS-061104 August 2015
15 of 20
Semtech
www.semtech.com
3. Schematics
Figure 3-1: EB-3GSRD Board Schematic
DNP
DNP
DNP
DNP
DNP
MALE
DNP
DNP
90Ω DIFF PAIR
POWER LED
USB
EEPROM
DNP
FEMALE
GSPI
DNP
RCLK_2V5
2V5
2V5
SMA
GS6152
10nF
2V5
SMA
10μF
10nF
1MΩ
750Ω
0Ω
4.7μF
4.7μF
RCLK_1V8
RCLK_1V8
4.7μF
10nF
1KΩ
8pF
2.20kΩ
100nF
10kΩ
93C46B-I/SN
5V
4.7μF
0Ω
8pF
NX8045GB
100nF
27.0Ω
27.0Ω
10μF
33nF
3V3
10nF
470Ω
75Ω
BNCRA
4.7μF
BNCRA
10nF
SMTRARCPTUSBBMICRO
75Ω
0Ω
0Ω
6MHz
5V
5V
470Ω
0.35A
GREEN
75Ω
470nF
100nF
5V
10nF
10nF
40 OHM
3V3
100Ω
100nF
5V
1.5kΩ
3V3
3V3
3V3
33Ω
ABM8G
10nF
FT2232D
1kΩ
1V8
EQ_1V8
RCLK_1V8
75Ω
10nF
2V5
27MHz
18pF
10nF
THHDR2X5
10nF
200Ω
3V3
0Ω
100nF
THSKT2X5
0Ω
100nF
1kΩ
0Ω
33Ω
10nF
75Ω
75Ω
2.2nH
10nF
2.2nH
75Ω
4.7nH
6.2nH
3.9nH
75Ω
SMA
10nF
18pF
0Ω
3V3
33Ω
FXL4TD245
3V3
100nF
37.4Ω
GS3140
10nF
75Ω
4.7nH
75Ω
4.7μF
BNCRA
4.7μF
SMA
2.2μF
10μF
4.7μF
1μF
1μF
GS2989
R44
J10
C38
U4
R17
L1
R21
C11
C12
R23
C20
C21
C13
C22
J3
J4
C26
C27
Y2
R42
C40
C34
C39
U8
R45
R46
C48
R52
R47
R48
L5
R49
C47
R51
C49
C43
C44
L3
L4
C45
C46
C50
R50
L6
C36
C41
C42
R35
1kΩ
DNP
R36
1kΩ
DNP
TP5
TP7
TP8
R30
TP3
C9
U3
R16
J2
R18
R19
F1
L2
R24
U5
C17
C16
Y1
R27
R26
R25
R28
R31
C15
C10
C14
C18
R29
C19
C23
C37
R43
TP4
C25
C28
C30
C31
C32
C33
C35
U7
D5
R22
J1
J8
J9
C24
C29
J6
R41
R40
R34
R32
R37
R38
J7
R54
R39
R55
L7
U6
J5
R20
CD_DIS1B
XTAL_BUFF_OUT
XTAL_BUFF_IN
DDO1_DIS
CSB
SCLK
RCLK_SDOUT
SDIN
RCLK_LOCKED
RCLK_LOS
DDI_SEL0
EXT PWR
SCLK
CSB
XTAL_BUFF_OUT
SDOUT
EXT PWR
SDIN
RCLK_SDOUT
SCLK
SDOUT
CSB
EQ_LOS
XTAL_BUFF_IN
CD_DIS2B
5
17
18
15
38
31
5
6
15
11
10
16
8
2
3
7
14
11312
49
1
23
1
2
3
1
2
3
4
2
3
6
7
16
14
12
11
10
9
TAB
1
8
4
13
2
1
3
4
7
6
8
5
3
2
5
4
SH1
SH2
SH3
SH4
SH5
SH6
1
6
15
13
12
11
24
23
22
21
20
19
17
16
45
46
30
29
28
27
40
39
38
37
36
35
33
32
48
2
1
9
18
25
34
41
4
5
10
2647
8
7
3
42
14
31
43
44
12
1
22
2
1
5
4
8
7
11
10
14
15
33
34
30
40
41
3
6
9
12
13
25
26
44
45
27
21
19
20
TAB
42 47 36 28
37
46
23
43 48
29
32 35
39
24
16
2
1
2
1
2
1
12
34
56
78
910
1
2
3
1
2
3
3
4
5
6
14
13
12
11
8
9
2
15
10
7
TAB
1
16
12
34
56
78
9
10
SD/HD*
VEE2
VEE1
VCC2
VCC1
TAB
OSP
EQ_EN
DISABLE2
DISABLE1
RSET
SDO2
SDO2
SDO1
SDO1
DDI
DDI
1
3
5
7
9
2
4
6
8
10
TAB
VCCB
GND
VCCA
T/R1
B0
B1
B2
B3
T/R2
OE
T/R3
A3
A2
A1
A0
T/R0
1
3
5
7
9
2
4
6
8
10
RA
RA
RA
TAB
VEE_CORE_48
VCC_CORE_47
VCO_FILT
VEE_CORE_43
VCC_CORE_42
VEE_DFT
VCC_DFT
VEE_DDO_32
VEE_DDO_35
VEE_DDO_29
VCC_DDO1
VSS_DIG
VDD_DIG
GND_9
GND_6
GND_3
LF-
LF+
DFT_CLKINP
DFT_CLKINN
VCO_DFT_FILT
VCC_DDO0
DDO0P
DDO0N
DDO1P
DDO1N
RST
GPIO3
GPIO2
CS
SCLK
SDOUT
SDIN
XTAL_BUF_OUT
XTAL_CLK_OUT
XTAL_CLK_IN
DDI_SEL1
DDI_SEL0/STROBE
GPIO1
GPIO0
DDI3N
DDI3P
DDI2N
DDI2P
DDI1N
DDI1P
DDI0N
DDI0P
AVCC
AGND
VCC_42
GND_34
VCCIOB
GND_25
GND_18
VCCIOA
GND_9
VCC_3
EECS
TEST
XTOUT
XTIN
PWREN
BDBUS0
BDBUS1
BDBUS2
BDBUS3
BDBUS4
BDBUS5
BDBUS6
BDBUS7
BCBUS0
BCBUS1
BCBUS2
BCBUS3
SI/WUB
ADBUS0
ADBUS1
ADBUS2
ADBUS3
ADBUS4
ADBUS5
ADBUS6
ADBUS7
ACBUS0
ACBUS1
ACBUS2
ACBUS3
SI/WUA
USBDM
USBDP
3V3OUT
RSTOUT
RESET
EEDATA
EESK
SHELL6
SHELL5
SHELL4
SHELL3
ID
SHELL2
SHELL1
GND
D+
D-
VBUS
VCC
VSS
NC_7
ORG
DO
DI
CLK
CS
VCC_D/VCC_IO
VCC_O
VEE_O
VEE_A
VCC_A
INT
CS
SDOUT
DDO
DDO
SCLK
SDIN
AGC
AGC
SDI
SDI
EB-3GSRD
User Guide Rev.0
PDS-061104 August 2015
16 of 20
Semtech
www.semtech.com
Figure 3-2: Power & Controls Schematic
RCLK LOCK SIGNAL
EQ LOS SIGNAL
RCLK LOS SIGNAL
LABEL
LABEL
THHDR1X2
THHDR1X2
1V8
10μF
RCLK_2V5
10μF
10μF
10μF
100nF
4.75kΩ
THHDR1X2
SC4215HSETRT
1.82kΩ
1kΩ
SWDIP4
1kΩ
1V8
1kΩ
2V5
1kΩ
1kΩ
5V
470Ω
RED
2V5
1.82kΩ
100nF
RED
10kΩ
MMBT3904
10K
10μF
10μF
100nF
ADJADJ
10μF
10kΩ
MMBT3904
470Ω
470Ω
100nF
7.32kΩ
MMBT3904
SC4215HSETRT
GREEN
2V5
C51
C52
C53
TP14
JP3
TP13TP12
JP2
JP1
TP10
TP11
TP9
R8
R9
R10
R11
R7
TP2
TP1
R1
Q1
D2
R3
R2
Q2
D3
R4
R5
Q3
D4
R6
C1
C2
SW1
U1
R13 R12
C3
D1
C4
C5
C6
U2
R15 R14
C7
C8
CD_DIS1B
DDO1_DIS
CD_DIS2B
DDI_SEL0
RCLK_LOSEQ_LOS RCLK_LOCKED
EXT PWR
21
21
21
13
2
2
1
1
3
2
21
13
2
21
5
6
7
8
4
3
2
1
63
TAB
4
1
5
8
72
21 63
TAB
4
1
5
8
72
1
1
1
1
1
1
1
C
B
E
C
B
E
C
B
E
1
ON
TAB
GND
VIN
FB
VO
NC-5
NC_4
EN
NC_1
TAB
GND
VIN
FB
VO
NC-5
NC_4
EN
NC_1
EQ_1V8RCLK_1V8
EB-3GSRD
User Guide Rev.0
PDS-061104 August 2015
17 of 20
Semtech
www.semtech.com
4. Board Layout
Figure 4-1: Top Layer
Figure 4-2: Ground 1 Layer
Figure 4-3: Power Layer
Figure 4-4: Inner Route Layer
Figure 4-5: Ground 2 Layer
Figure 4-6: Bottom Layer
EB-3GSRD
User Guide Rev.0
PDS-061104 August 2015
18 of 20
Semtech
www.semtech.com
5. Bill of Materials
Table 5-1: EB-3GSRD Bill of Materials
Quantity Reference Part Description
9
C1, C4, C5, C8, C37, C42, C51, C52,
C53
Capacitor; ceramic 10μF 6.3V 20% X5R 0603
4 C2, C3, C6, C7 Capacitor; ceramic 0.1μF 6.3V 10% X5R 0402
7 C9, C14, C18, C19, C23, C24, C29 Capacitor; ceramic 0.1μF 16V 10% X7R 0402
1 C10 Capacitor; ceramic 10μF 10V X5R 0805
2 C11, C12 Capacitor; ceramic 1.0μF 6.3V 20% X5R 0402
1 C13 Capacitor; ceramic 0.47μF 6.3V 10% X5R 0402
1 C15 Capacitor; ceramic 0.033μF 6.3V 10% X5R 0402
2 C16, C17 Capacitor; ceramic 8pF 50V +/-0.5pF C0G 0402
15
C20, C21, C22, C25, C28, C30, C31,
C32, C33, C36, C41, C43, C44, C45,
C46
Capacitor; ceramic 10000pF 25V 10% X7R 0402
8
C26, C27, C38, C39, C47, C48, C49,
C50
Capacitor; ceramic 4.7μF 6.3V 20% X5R 0402
2 C34, C40 Capacitor; ceramic RF 18pF 50V 5% C0G 0402
1 C35 Capacitor; ceramic 1μF 4V 10% X5R 0402
1 D1 Diode; Schottky 20V 3A SMA
2 D2, D3 LED; 1.6x0.8mm 625nm RED CLR SMD
2 D4, D5 LED; 1.6x0.8mm 568nm GRN CLR SMD
1 F1 Fuse; PTC Reset 6V 0.35A 1206
3 J1, J8, J9 3G/HD RA BNC
1 J2 Connector; RCPT REV Micro-USB Type B
4 J3, J4, J7, J10 SMA Edge Mount Short Signal Pin
1 J5 Connector; Socket extended 10-position 0.100 DL gold
1 J6 Connector; Header 10-position 0.100 DL gold
3 JP1, JP2, JP3 Connector; Header 2-position 0.100 SGL gold
1 L1 Inductor; 6.2nH 700mA 0402
1 L2 Ferrite; 1.5A 40W 0805 SMD
2 L3, L4 Inductor; 2.2nH 300mA 0402
2 L5, L6 Inductor; 4.7nH 300mA 0402
1L7 Resistor; 0.0Ω 1/10W 5% 0402 SMD
EB-3GSRD
User Guide Rev.0
PDS-061104 August 2015
19 of 20
Semtech
www.semtech.com
3 Q1, Q2, Q3 Transistor; GP NPN AMP SOT23-3
4 R1, R3, R5, R16 Resistor; 10.0kΩ 1/16W 1% 0402 SMD
5 R2, R4, R6, R22, R29 Resistor; 470Ω 1/16W 1% 0402 SMD
3 R7, R31, R34 Resistor; 1.00kΩ 1/16W 1% 0402 SMD
5 R8, R9, R10, R11, R43 Resistor; 1.00kΩ 1/16W 1% 0402 SMD
1 R12 Resistor; 7.32kΩ 1/16W 1% 0402 SMD
2 R13, R15 Resistor; 1.82kΩ 1/16W 1% 0402 SMD
1 R14 Resistor; 4.75kΩ 1/16W 1% 0402 SMD
10
R17, R21, R45, R46, R47, R48, R49,
R50, R51, R52
Resistor; 75.0Ω 1/16W 1% 0402 SMD
4 R18, R19, R30, R40 Resistor; 0.0Ω 1/10W 5% 0402 SMD
1 R23 Resistor; 37.4Ω 1/16W 1% 0402 SMD
1 R24 Resistor; 2.20kΩ 1/10W 1% 0402 SMD
2 R25, R26 Resistor; 27.0Ω 1/10W 1% 0402 SMD
1 R27 Resistor; 100Ω 1/16W 1% 0402 SMD
1 R28 Resistor; 1.50kΩ 1/16W 1% 0402 SMD
3 R37, R38, R39 Resistor; 33Ω 1/16W 0.5% 0402 SMD
1 R42 Resistor; 1.00MΩ 1/16W 1% 0402 SMD
1 R44 Resistor; 750Ω 1/16W 1% 0402 SMD
1 SW1 Switch; tape seal 4-position SMD
13
TP1, TP2, TP3, TP4, TP5, TP7, TP8,
TP9, TP10, TP11, TP12, TP13, TP14
Test Point; pad 62mil round pad 39mil finished hole
2 U1, U2 IC; REG LDO ADJ 2A 8-SOIC
1 U3 IC; EEPROM 1kBIT 2MHz 8-SOIC
1 U4
IC; GS3140-INE3 Multi-rate SDI Equalizer with 3Gb/s And
MADI Compatibility
1 U5 IC; USB FS dual UART/FIFO 48-LQFP
1 U6 IC; Translator dual 4-bit 16-DQFN
1 U7 IC; GS6152-INE3 Multi-rate Reclocker
1 U8 IC; GS2989-INE3 Dual-output 3Gb/s Cable Driver
1 Y1 Crystal; 6MHz 8pF 8.0x4.5x1.8mm SMD
1 Y2 Crystal; 27.000MHz 18pF 3.2x2.5x1mm SMD
Table 5-1: EB-3GSRD Bill of Materials (Continued)
Quantity Reference Part Description
IMPORTANT NOTICE
Information relating to this product and the application or design described herein is believed to be reliable, however such information is
provided as a guide only and Semtech assumes no liability for any errors in this document, or for the application or design described herein.
Semtech reserves the right to make changes to the product or this document at any time without notice. Buyers should obtain the latest relevant
information before placing orders and should verify that such information is current and complete. Semtech warrants performance of its
products to the specifications applicable at the time of sale, and all sales are made in accordance with Semtech’s standard terms and conditions
of sale.
SEMTECH PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS,
DEVICES OR SYSTEMS, OR IN NUCLEAR APPLICATIONS IN WHICH THE FAILURE COULD BE REASONABLY EXPECTED TO RESULT IN PERSONAL
INJURY, LOSS OF LIFE OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. INCLUSION OF SEMTECH PRODUCTS IN SUCH APPLICATIONS IS
UNDERSTOOD TO BE UNDERTAKEN SOLELY AT THE CUSTOMER’S OWN RISK. Should a customer purchase or use Semtech products for any such
unauthorized application, the customer shall indemnify and hold Semtech and its officers, employees, subsidiaries, affiliates, and distributors
harmless against all claims, costs damages and attorney fees which could arise.
The Semtech name and logo are registered trademarks of the Semtech Corporation. All other trademarks and trade names mentioned may be
marks and names of Semtech or their respective companies. Semtech reserves the right to make changes to, or discontinue any products
described in this document without further notice. Semtech makes no warranty, representation or guarantee, express or implied, regarding the
suitability of its products for any particular purpose. All rights reserved.
© Semtech 2015
EB-3GSRD
User Guide Rev.0
PDS-061104 August 2015
20 of 20
Semtech
20
Contact Information
Semtech Corporation
200 Flynn Road, Camarillo, CA 93012
Phone: (805) 498-2111, Fax: (805) 498-3804
www.semtech.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Semtech EB-3GSRD Evaluation Board User guide

Brand
Semtech
Model
EB-3GSRD Evaluation Board
Type
User guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents