Dell W-AP134/135 User guide

Hello! I am an AI chatbot trained to assist you with the Dell W-AP134/135 User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

AP-130-MNT-W2

Installation Guide

0511078-03 | August 2013 1

The AP-130-MNT-W2 allows you to mount your 130 Series access point to a flat surface or an electrical gang

box. The AP-130-MNT-W2 can attach to several single and dual gangwall boxes, including US, UK and DIN

standardized models.

Package Contents

 AP-130-MNT-W2 Mounting Bracket

 T8 Torx Security Screw

Installation

1. Begin by attaching the wall mount bracket to the wall as shown in Figure 1.

a. Install any necessary wall anchors. Wall anchors are not included in this kit.

b. Align the screw holes in the mounting bracket with the previously installed anchors or demarcated

screw points.

c. Insert the screws to secure the mounting bracket. Screws are not included in this kit.

Figure 1 Wall Mount Bracket to Wall

If installing this kit on a electrical gang box, you may use a different set of screw holes for mounting. Which screw

holes you use will depend on the electrical gang box in your installation.

AP-130_007

2 AP-130-MNT-W2 | Installation Guide

2. Attach any necessary cables and/or antennas to the AP. Cables can be fed through the opening above the

metal slider on the bracket.

3. Push the metal slider up to allow the AP to connect.

4. While still pushing the metal slider, align the mounting posts on the bracket with the mouting holes

shown in Figure 2.

Figure 2 Align the AP With the Bracket

5. Once the AP is placed on the bracket, release the metal slider to lock the AP in place as shown in Figure

Figure 3 Mounted AP

AP-130_008

AP130_009

AP-130-MNT-W2 | Installation Guide 3

6. (Optional) Attach the T8 Torx security screw, as shown in Figure 4, for additional security.

Figure 4 Security Screw

AP130_010

4 AP-130-MNT-W2 | Installation Guide