ESAB CM 82 Troubleshooting instruction

  • Hello! I am an AI chatbot trained to assist you with the ESAB CM 82 Troubleshooting instruction. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
TECHNICAL
BULLETIN
Date: 11/26/2008
Product: CM 82 By: Jorge Santana
Subject: 230v Input plug
Summary: Units are supplied only with cable
THERMAL DYNAMICS TECHNICAL SUPPORT
Phone: 1-800-752-7622
Fax: 1-603-298-7402
tdc-tech@thermadyne.com
www.thermadyne.com
Form 0007
82 Benning Street
West Lebanon, NH 03784
1-603-298-5711
Fax: 1-800-221-4401
“Exceeding Customer Expectations Through Performance Excellence"
Valued Thermadyne Customer,
This memo is just to inform you that the all Cutmaster 82 230V units are now supplied without the
230v plug:
1-1130-1
Comes with 9' single ph cord. 10/3 AWG
1-1131-1 Comes with 9' single ph cord. 10/3 AWG
1-1132-1 Comes with 9' single ph cord. 10/3 AWG
1-1133-1 Comes with 9' single ph cord. 10/3 AWG
The plug that was previously supplied with the units is perfectly safe to use but it’s being removed
in order to meet a CSA certification.
We are currently looking for a plug that will meet the needs of this product and our customers in different
markets. This change was implemented in late August. We apologize for the inconvenience.
Please do not hesitate to contact us if you have any questions.
For More information Contact:
/