Gigabyte GSmart S1205 User manual

S1205│

1

Device Information

This section introduces you to the hardware of the

device.

No. Items Functions

1 Touch Screen

Display screen. Use

stylus to select items on

screen.

2

Windows Flag

Key

Press to open Start

menu options.

3

Phone Settings

Key

Press to launch phone

settings screen

4 Call Key

Press this key to make

or answer a call.

5 End Key

Press this key to end a

call or to return toToday

screen from any

screen.

6 Confirm Key

Select an icon on

screen, and then, press

this key to activate the

function of that icon.

S1205│

2

7 LED Indicator

The LED indicator

indicates the status of

your device by showing

different colors.

Red: Charging is

activated.

Green: Mobile network

is detected.

Blue: Bluetooth, Wi-Fi,

GPS is activated.

8 Receiver/Speaker

The source of music

and voice.

9 Power Key

Hold down this key for a

few seconds to turn

on/off your device.

10 Micro USB slot

Use USB connector to

synchronize data with

your desktop PC, and

transmit data or charge

the battery. It is also a

handset plug.

11 Headset Plug

You can listen to music

via headset.

S1205│

3

12 Volume Key

Slide this key upwards

or downwards to

adjust volume.

13

Micro SD card

slot

You can insert your

Micro SD card here.

14 Camera Key

Press this key to

launch camera.

15 Camera Lens

The Camera on the

back of the device

supports 3-mega-pixel

photo and high-quality

video.

S1205│

4

No. Items Functions

16 Stylus

There are 2 ways to use your

stylus:

․Tap：Tap a desired item by

your stylus, and then, lift the

stylus from the screen.

․Press：Use your stylus to

hold down on a desired item

until the pop-up menu

appears.

17

Battery

Cover

Remove the battery cover,

and then, install the battery

and insert your SIM card into

the carrier.

Remove the battery cover and

the stylus. Then you can find

the reset button. Press it to

reset your phone.

S1205│

5

Battery

Your device comes with a removable and

rechargeable Lithium Polymer battery. The

standby time and talk time will vary depending on

the local network and individual usage.

Open Battery Cover

Push the battery cover upwards, and then,

remove it.

Charging the Battery

Please make sure that the battery is installed and

fully charged when use your device for the first

time. You may charge the battery in the following

ways:

1. Universal AC Adapter: Plug your AC adapter

into a suitable main power socket, and plug

the connector to the charging slot of your

device. The phone will start charging

automatically.

2. USB Cable: Connect your device and your PC

with the USB cable supplied in your package.

Power On/Off

Press Power On/Off key on the top of the device

to turn on/off the device.

To reduce the power consumption of your device,

you may change the backlight duration and

brightness level.

Tap Start > Settings > Power > Advanced tab, and

Note: Using any battery pack or AC adapter

(charger) not specified/endorsed by GSmart

on this phone may be dangerous and may

invalidate any warranty and approval given to

the device. Unplug the charger from the

power supply when it is not in use.

S1205│

6

then, select the duration of the backlight. This

function helps you save power.

Battery Power

Tap Start > Settings > Power > Battery tab. The

bar indicates the remaining power of the battery.

Sleep Mode

1. Sleep Mode is a power saving mode designed

to reserve the power of the battery. After idling

for a period of time, the device enters Sleep

Mode automatically. You may also manually

enter Sleep mode by pressing Power Key. The

backlight of the screen will turn off and the

device will activate Sleep Mode. When your

device is in Sleep Mode, it will not respond to

any operation or touches on screen and on the

keypad.

2. Press Power Key again to exit Sleep mode.

3. You may adjust time to activate Sleep Mode.

The device will enter Sleep Mode

automatically, when no operation is done

within a period of time.

․Tap Start > Settings > Power > Advanced tab.

․Select your desired time period on “On battery

power” or “On external power”.

․Tap OK to complete this setting.

SIM Card

Before inserting/removing a SIM card, please

make sure that the device is turned off and is not

connected to any power supply.

1. Push the battery cover upwards, and then

remove it.

2. Find the carrier of the SIM card on the upper

section of your phone.

3. Insert the SIM card into the slot. The metal

contacts on the SIM please face down. There

are two slots for two SIM cards. Upper slot is

for SIM1, SIM2 slot is on the underside.

S1205│

7

4. Please always remember to pull down the SIM

card latch for locking your SIM card safely. If

you don’t pull down the SIM card latch, the

device won’t power on and battery cover can’t

be pulled back. The SIM card latch is on the

upper-right corner of the device.

5. Return the battery back to the battery slot, and

then, return the battery cover back onto the

device.

6. Push the battery cover back, and then, you will

hear “click”.

Lock/Unlock

1. Lock the device:

Tap Start > Lock to lock the device. The device

will not respond to touches on screen nor react

to any input on the keypad, when it is locked.

2. Unlock the device:

Slide Lock icon on the screen, and then, the

S1205│

8

device will be unlocked.

Advanced Lock Settings

You can create a personal password to lock your

device.

A strong password must have at least 7

characters that are a combination of uppercase

and lower case letters, numerals, and

punctuations.

1. Tap Start > Settings > Lock

2. To enable this function, select how long your

device must be turned off before the password

is required for using the device. Tap “Prompt if

phone unused for”.

3. Select the type of password you would like to

use: Strong alphanumeric or Simple PIN.

4. Enter the password, and type it again in

Confirm field.

5. On Hint tab, the system provides a hint for the

password in case you forget your password.

This hint may be visible by others.

6. On Display tab, you can change the unlock

display.

7. Tap OK to save the settings.

․If your device is configured to connect to

network, use a strong password to help protect

network security.

․If you forget your password, you must reset the

device. The reset function will erase all files,

data, and programs.

․If you have used ActiveSync to create a backup

file, all of your program data can be restored.

Screen Orientation

You can change the display of the screen. The

Portrait mode allows you to get a better view or a

Note: The Lock/Unlock procedure is based

on the lock display of Windows Default.

S1205│

9

better operation of certain programs on your

device, while Landscape may be optimal for

viewing longer text files.

Tap Start > Settings > System > Screen >

General tab.

1. On General tab, select your desired orientation:

Portrait, Landscape (right-handed), or

Landscape (left-handed).

2. Tap OK, and the screen will be changed

accordingly.

Portrait

S1205│

10

Landscape

Display Information

The main screen displays the following

information:

1. Start Menu

Tap “Start” to open Start Menu. Tap Start >

Today, you can return to Today screen at any

time.

2. Status & Icon Area

Display icons of notifications and the status of

the system. You can tap the icons to get the

details of the functions.

3. Today Screen

On Today screen, this area contains shortcuts

to certain programs and important information

of today. Tap Start > Settings > Today, you can

change the settings of Today screen.

4. Command Area

Depending on different mode, this area

contains different features such as menu

options, Input Method and commands to

create or edit a file.

5. Pop-up Window

It allows you to access an item quickly. Tap the

selected item to perform an action. To cancel

this pop-up window, tap other areas of this

screen.

S1205│

11

Status

This ar

e

You ca

n

setting

s

Stat

u

Typ

e

Batte

Call

s

& Icon Area

e

a shows status and

n

tap the icons to ge

t

s

.

u

s

e

s

Icons

ry

The

p

full.

The

p

low.

P

Batt

e

s

Call

f

Call

o

Data

You

h

Voic

e

alerts of the system

t

the details and the

Descriptions

p

ower of the battery

i

p

ower of the battery

i

P

lease recharge.

e

ry is charging.

f

orward.

o

n hold.

call.

h

ave missed calls.

e

call is active.

S1205│

12

.

i

s

i

s

Signal

No con

n

GPRS i

s

GPRS i

s

Building

GPRS.

Bluetoo

t

Wi-Fi is

network

SIM1 h

a

SIM2 h

a

n

ections

s

in range.

s

connected.

connection to

t

h is activated.

activated; a Wi-Fi

is in range; Wi-Fi

is connected.

a

s strong signal.

a

s strong signal.

SIM1

SIM

2

SIM1

SIM

2

SIM1

SIM

2

Roa

m

Tryin

g

GPS

no service.

2

no service.

has no SIM card.

2

has no SIM card.

phone off.

2

phone off.

m

ing.

g

to connect GPS;

is connected.

S1205│

13

Messag

e

Volume

Quick

Menu

Setting

e

You ha

v

messag

You ha

v

voice m

a

You ha

v

instant

m

System

Phone

v

Ringer i

s

Ringer i

s

Quick

M

help yo

u

frequen

t

v

e one or more new

e(s).

v

e one or more new

a

il(s).

v

e one or more

m

essage(s).

volume.

v

olume.

s

on.

s

off.

M

enu Setting can

u

adjust the

t

ly used settings.

S1205│

14

Specifications

Items Specifications

System Information

Operating

System

Microsoft Windows Mobile 6.5

Professional

Processor MT6516 at 416MHz

Memory ROM 256 MB, RAM 128 MB

Size

Dimensions

(L x W x T)

110.6 x 55 x 13.1 mm

Weight 114.5 g (including Battery)

Battery

Capacity

Li-Poly pack 1300 mAh

Standby time Up to 150 hours (It may vary

depending on the availability

of local networks and

individual usage.)

Talk t i m e

Up to 4 hours (It may vary

depending on the availability

of local networks and

individual usage.)

Display Characteristics

Type

3.2”, 65, 536 WQ

V

GA TFT LCD

touch panel

Resolution 240 x 400 pixels

Band

*GSM/GPRS/EDGE

850/900/1800/1900

Connectivity

Bluetooth Bluetooth 2.1

Wi-Fi IEEE 802.11b/g

CSD Y

Modem dial-up Y

S1205│

15

USB Micro USB 2.0

Image

Format JPEG, GIF, PNG, BMP

Max Size (per) Depends on available RAM

Audio

Format MP3, AMR, AAC, MIDI

Max Size Depends on available RAM

V

ideo

Format 3GP, WMV7/8/9, H.264 D1

Max Size Depends on available RAM

Phonebook

Size Depends on available RAM

Ringtone

Type MP3,

A

AC, AMR

Polyphone 64 polyphonic MIDI file

Digital Camera

Type JPEG, GI

F

, PNG, BMP

Camera 3.0 mega pixels

Video Y

Recording

Message

Windows Live

Messenger

Y

SMS Y

MMS Y

E-mail Y

External Memor

y

Type Micro SD Card

Max Size Maximum to 16 GB

Operating Temperature

Temperature -10 ~45℃℃

S1205│

16

Introduction of Smart Pack

On Today, tap Start > Settings > Personal > Smart

Pack, and select the interface you want.

In interfaces, hold down Confirm Key to switch the

screens of the interfaces to Today.

Live Nature

Main Screen

1. Status & Icon Area

2. Battery

3. Lock/Unlock

4. Time

5. Weather

6. Phone

7. Te xt

8. Call History

9. Smart Pack

Hold d

o

bottom

menu.

Y

menu.

o

wn on one of fou

r

of the main screen

Y

ou can select the i

r

icons located at t

h

to activate the qui

c

cons you want in th

S1205│

17

h

e

c

k

at

Status &

I

Display ic

o

system. Y

o

of the fun

c

Icons

(D

y

I

con Area

o

ns of notifications a

n

o

u can tap some ico

n

c

tions.

Descri

p

GPRS i

s

EDGE i

s

GPRS i

s

EDGE i

s

y

namic)

Data is

c

No GP

R

n

d the status of the

n

s to get the details

p

tions

s

active

s

active

s

used

s

used

c

onnecting

R

S Service

(Dyn

a

(Dyn

a

Getti

n

Roa

m

Activ

e

a

mic)

Activ

e

Activ

e

No

W

is no

t

a

mic)

Wi-Fi

n

g MSN Message

m

ing

e

Sync is connected

e

Sync is connecting

e

Sync is failed

W

i-Fi Service, or Wi-

F

t

connected

is connecting

is connected

S1205│

18

F

i

Bluetoo

t

Getting

d

Bluetoo

t

active;

H

microph

Use the

adapter

the micr

active.)

A2DP H

connect

e

Vibrate

i

Mute

Alarm is

t

h is active

d

ata via Bluetooth

t

h headset is

H

eadset with

one is inserted.

headset (The

is inserted, and

ophone is not

eadset is

e

d.

i

s active

active

GPS

FM

R

Reco

Stop

w

Miss

e

On t

h

Unre

a

Unre

a

Invali

is active

R

adio is active

rder is active

w

atch is active

e

d call

h

e line

a

d SMS/MMS

a

d E-mail

d SIM Card

S1205│

19

Battery

Tap the B

a

the batter

y

left) to swi

t

No SIM

SIM Ca

r

No Pho

n

No Pho

n

Strong

S

The po

w

is full

Chargin

g

0%~10

0

time. 0

%

100%.

a

ttery icon to check

t

y

. Slide the screen

(

t

ch the screens:

card

r

d is locked

n

e Service

n

e Function

S

ignal

w

er of the battery

g

0

%. Carry 10% per

%

, 10%, ~…, 90%,

t

he current power of

(

left to right/right to

S1205│

20

˙On Battery tab, you can check the left power of

the battery. The power of the battery will vary

depending on individual usage.

˙On Advanced tab, you can change the duration

of the backlight.

Time

Tap beside the Time icon to adjust time.

Slide to choose “Year, Hour, Minute, Month, and

Date” for adjusting time.

Tap the Alarm icon to adjust time and alarms:

˙On Time tab, you can adjust time.

˙On Alarms tab, you can adjust alarms.

˙On More tab, you can adjust more settings.

Weather

Tap beside the Weather icon to adjust the

settings of weather.

˙On Forecast tab, you can get the information of

weather about today and this week.

˙On Settings tab, you can select country/area

and city. You can also select Fahrenheit or

Centigrade. Tap to update the information

of weather.

˙On Auto tab, you can adjust the advanced

settings.

Lock/Unlock

1. Lock the device:

Tap the Unlock icon to lock the device. The device

will not respond to touches on screen nor react to

any input on the keypad, when it is locked.

Notes: Before you adjust the settings of

weather, you need to adjust time. The

information of weather can only shows the

information of today and this week.

Page is loading ...

Gigabyte GSmart S1205 User manual

Gigabyte GSmart S1205 User manual

Related papers

Other documents