Gigabyte GSmart S1200 User manual

Brand: Gigabyte

Model: GSmart S1200

Type: User manual

This manual is also suitable for

GSmart S1200 WM6.5

Gigabyte GSmart S1200 is equipped with a 3-megapixel camera, a microSD card slot for expandable storage, and a variety of connectivity options including Bluetooth, Wi-Fi, and USB. It runs on Microsoft Windows Mobile 6.1 Professional operating system and features a 3.1-inch touchscreen display, a call key, an end key, and a confirm key.

Device Information

This section introduces you to the hardware of the

device.

No. Items Functions

1 Touch Screen

Display screen. Use

stylus to select items on

screen.

2 Call Key

Press this key to make

or answer a call.

3 End Key

Press this key to end a

call or to return to

Today screen from any

screen.

4 Confirm Key

Select an icon on

screen, and then, press

this key to activate the

function of that icon.

5 Receiver/Speaker

The source of music

and voice.

6 Light Sensor

Help you change the

backlight automatically.

Front Camera

Lens

Use when making video

calls.

8 LED Indicator

The LED indicator

indicates the status of

your device by showing

different colors.

Green: Mobile network

is detected.

Red: Charging is

activated.

Blue: Bluetooth is

activated.

Orange: Wi-Fi is

activated.

Purple: GPS signal is

detected.

9Power Key

Hold down this key for a

few seconds to turn

on/off your device.

10 Mini USB slot

Use USB connector to

synchronize data with

your desktop PC, and

transmit data or charge

the battery. It is also a

handset plug.

S1200│

11 Side Key

Press this key to

choose items, to

adjust volume, or to

adjust a focal distance

of the camera.

Micro SD card

slot

You can insert your

Micro SD card here.

13 Camera Key

Hold down this key to

launch camera.

14 Stylus

There are 2 ways to

use your stylus:

․Tap：Tap a desired

item by your stylus,

and then, lift the stylus

from the screen.

․Press：Use your

stylus to hold down on

a desired item until the

pop-up menu appears.

No. Items Functions

15 Camera Lens

The CMOS Camera on

the back of the device

supports 3-mega-pixel

photo and high-quality

video.

16 Battery Cover

Remove the battery

cover, and then, install

the battery and insert

your SIM card into the

carrier.

Remove the battery

cover and the stylus.

Then you can find the

S1200│

reset button. Press it to

reset your phone.

Battery

Your device comes with a removable and

rechargeable Lithium Polymer battery. The

standby time and talk time will vary depending on

the local network and individual usage.

Open Battery Cover

Push the battery cover upwards, and then,

remove it.

Charging the Battery

Please make sure that the battery is installed and

fully charged when use your device for the first

time. You may charge the battery in the following

ways:

1. Universal AC Adapter: Plug your AC adapter

into a suitable main power socket, and plug

the connector to the charging slot of your

device. The phone will start charging

automatically.

2. USB Cable: Connect your device and your PC

with the USB cable supplied in your package.

Power on

Hold down Power Key for a few seconds to turn

on the device.

Power off

Hold down Power Key for a few seconds to turn

off the device.

To reduce the power consumption of your device,

you may change the backlight duration and

brightness level.

Tap Start > Settings > System tab > Power >

Advanced tab, and then, select the duration of the

backlight. This function helps you save power.

Battery Power

Tap Start > Settings > System tab > Power >

Battery tab. The bar indicates the remaining

power of the battery.

Note: Using any battery pack or AC adapter

(charger) not specified/endorsed by GSmart

on this phone may be dangerous and may

invalidate any warranty and approval given to

the device. Unplug the charger from the

power supply when it is not in use.

Sleep Mode

1. Sleep Mode is a power-saving mode designed

to reserve the power of the battery. After idling

for a period of time, the device enters Sleep

Mode automatically. You may also manually

enter Sleep mode by pressing Power Key. The

backlight of the screen will turn off and the

device will activate Sleep Mode. When your

device is in Sleep Mode, it will not respond to

any operation or touches on screen and on the

keypad.

2. Press Power Key again to exit Sleep mode.

3. You may adjust time to activate Sleep Mode.

The device will enter Sleep Mode

automatically, when no operation is done

within a period of time.

․Tap Start > Settings > System tab > Power >

Advanced tab.

․Select your desired time period on “On battery

power” or “On external power”.

․Tap OK to complete this setting.

SIM Card

Before inserting/removing a SIM card, please

make sure that the device is turned off and is not

connected to any power supply.

1. Push the battery cover upwards, and then

remove it.

S1200│

2. Find the carrier of the SIM card on the

upper-right corner of your phone.

3. Insert the SIM card into the carrier. The metal

contacts on the SIM face down.

4. Return the battery back to the battery slot, and

then, return the battery cover back onto the

device.

5. Push the battery cover back, and then, you will

hear “click”.

Display Information

The main screen displays the following

information:

1. Start Menu

Tap “Start” to open Start Menu. To return to

Today screen at any time, tap Start > Today.

2. Status & Icon Area

Display icons of notifications and system

status. You can tap the icons to get the details

of the functions.

3. Today Screen

On Today screen, this area contains shortcuts

to certain programs and important information

of today. To change the settings of Today

screen, tap Start > Settings > Personal tab >

Today.

4. Command Area

Depending on different mode, this area

contains different features such as menu

options, Input Method and commands to

create or edit a file.

5. Pop-up Window

It allows you to access an item quickly. Tap the

selected item to perform an action. To cancel

this pop-up window, tap other areas of this

screen.

Start Menu

1. Quick access to certain fixed Microsoft

programs.

2. The most recently used programs.

S1200│

3. Tap “Programs” to enter the Programs menu.

4. Tap “Settings” to enter the Settings menu.

5. Tap “Help” to get detail information about

different features.

Status & Icon Area

This area shows status and alerts of the system.

You can tap the icons to get the details and the

settings.

Status

Types

Icons Descriptions

The power of the

battery is full.

The power of the

battery is low. Please

recharge.

Battery

Battery is charging.

Call forward.

Call on hold.

Calls

Data call.

You have missed calls.

Voice call is active.

HSDPA network is

connected.

3G network is

connected.

GPRS is in range.

GPRS is connected.

Building connection to

GPRS.

Bluetooth is activated.

Connections

Wi-Fi is activated; a

Wi-Fi network is in

range; Wi-Fi network

is connected.

Strong signal.

No signal.

Roaming.

Trying to connect

GPS; GPS is

connected.

GPS Tracking is trying

to connect.

GPS Tracking is

connected.

Trying to detect the

GPS signal of

Location Message.

Signal

The GPS signal of

Location Message is

detected.

You have one or more

new message(s).

Message

You have one or more

new voice mail(s).

S1200│

You have one or more

instant message(s).

System volume.

Phone volume.

Ringer is on.

Volume

Ringer is off.

Quick Menu

Setting

Quick Menu Setting

can help you adjust

the frequently used

settings.

Items Specifications

System Information

Operating

System

Microsoft Windows

Mobile 6.1 Professional

Processor

Qualcomm 7200A at 528

MHz

Memory

ROM 512 MB, RAM 288

Size

Dimensions

(L x W x T)

106 x 52 x 11.4 mm

Weight

102.5 g (including

Battery)

Battery

Capacity

Li-Poly pack 1010 mAh

Standby

time

Up to 150 hours (It may

vary depending on the

availability of local

networks and individual

usage.)

Talk t ime

Up to 4 hours (It may

vary depending on the

availability of local

networks and individual

usage.)

Display Characteristics

Type

3.1”, 65, 536 WVGA TFT

LCD touch panel

Resolution 480 x 800 pixels

Band

*HSUPA/HSDPA

900/2100

*GSM/GPRS/EDGE

850/900/1800/1900

Connectivity

Bluetooth Bluetooth 2.0

Wi-Fi IEEE 802.11b/g

WAP WAP 2.0

CSD Y

Modem

dial-up

USB Mini USB 2.0

Image

Format JPEG, GIF, PNG, BMP

Max Size

(per)

Depends on available

RAM

Audio

Format

MP3, WAV, WMA, AMR,

AAC, MIDI

Max Size

Depends on available

RAM

Video

Format 3GP, MPEG4

Max Size

Depends on available

RAM

Phonebook

Size

Depends on available

RAM

Ringtone

Type MP3, WMA, AMR

Polyphone 128 polyphonic MIDI file

Digital Camera

S1200│

Type JPEG/3GP, MPEG4

Rear

Camera

3.0 mega pixels

Front

Camera

0.3 mega pixels

Auto Focus

(Rear

Camera)

Macro Mode Y

Video

Recording

Message

Windows

Live

Messenger

SMS Y

MMS Y

E-mail Y

External Memory

Type Micro SD Card

Max Size Maximum to 8 GB

Operating Temperature

Temperature -10 ~45℃℃

Introduction of Smart Pack

On Today, tap Start > Settings > Personal tab >

Smart Pack, and select the interface you want.

Live Nature

Hold down Confirm Key to switch the screens of

some interfaces to Today.

Hold down on one of four icons located at the

bottom of the main screen to activate the quick

menu. You can select the icons you want in that

menu.

S1200│

Status & Icon Area

Display icons of notifications and the status of the

system. You can tap some icons to get the details

of the functions.

Icons Descriptions

GPRS is active

HSDPA is active

EDGE is active

3G/UMTS is active

GPRS is used

HSDPA is used

EDGE is used

3G/UMTS is used

(Dynamic)

Data is connecting

No GPRS Service

Getting MSN Message

Roaming

ActiveSync is connected

(Dynamic)

ActiveSync is connecting

ActiveSync is failed

No Wi-Fi Service, or Wi-Fi

is not connected

(Dynamic)

Wi-Fi is connecting

Wi-Fi is connected

Bluetooth is active

Getting data via Bluetooth

Bluetooth headset is active;

Headset with microphone

is inserted.

Use the headset (The

adapter is inserted, and the

microphone is not active.)

Vibrate is active

Mute

Alarm is active

GPS is active

S1200│

FM Radio is active

GPS Tracking is active

Location Message is active

Recorder is active

Stopwatch is active

Missed call

On the line

Unread SMS/MMS

Unread E-mail

Invalid SIM Card

No SIM card

SIM Card is locked

No FM Radio Service

No Phone Function

Strong Signal

The power of the battery is

full

Charging

0%~100%. Carry 10% per

time. 0%, 10%, …~…,

90%, 100%.

Battery

Tap the Battery icon to check the current power of

the battery. Slide the screen (left to right/right to

left) to switch the screens:

․On Battery tab, you can check the left power of

the battery. The power of the battery will vary

depending on individual usage.

․On Advanced tab, you can change the duration

of the backlight.

Time

Tap beside the Time icon to adjust time.

Slide “Year, Hour, Minute, Month, and Date” to

adjust time.

Tap the Alarm icon to adjust time and alarms:

․On Time tab, you can adjust time.

․On Alarms tab, you can adjust alarms.

․On More tab, you can adjust more settings.

Weather

Tap

beside the Weather icon to adjust the

settings of weather.

․On Forecast tab, you can get the information of

weather about today and this week.

․On Settings tab, you can select country/area

and city. You can also select Fahrenheit or

Centigrade. Tap to update the information

of weather.

․On Auto tab, you can adjust the advanced

settings.

Lock/Unlock

1. Lock the device:

Notes: Before you adjust the settings of

weather, you need to adjust time. The

information of weather can only shows the

information of today and this week.

S1200│

Tap the Unlock icon to lock the device. The

device will not respond to touches on screen

nor react to any input on the keypad, when it is

locked.

2. Unlock the device:

Tap “Unlock” on the lower-left corner of the

screen. Then tap “Unlock” button, and the

device is unlocked.

Volume

Press Side Key to launch Volume Menu. Slide the

volume to adjust it.

：Volume on the line

：Phone Volume

The hidden Functions Menu

In order to launch the hidden Functions Menu,

press Confirm Key on the main screen, or slide

the screen from the upper side to the downside. In

order to close the hidden Functions Menu,

re-press Confirm Key, or slide the screen from the

downside to the upper side.

Slide the screen (left to right/right to left) to select

different functions in Functions Menu.

Quick Contacts

1. Tap “Quick Contacts” to activate it.

2. In order to delete and edit contacts, hold down

on a contact to launch

and .

S1200│

3. Select a contact to make a call.

Swap/Delete Functions Menu

In order to launch Swap/Delete Functions Menu,

hold down on an icon in that menu.

Drag the selected icon to swap it, or click to

delete the selected icon. When you delete the

selected icon,

will be added in Functions

Menu.

The hidden Widget Menu

In order to launch the hidden Widget Menu, slide

the main screen from the downside to the upper

side. Tap

to close Widget Menu.

The hidden Widget Menu provides widgets of

MSN, World Clock, Weather, Calendar, Notes,

Clock & Alarms, and Advanced Calculator.

Chinese Painting

Slide the main screen to the other screen.

Phone

In order to switch to Phone screen, slide the main

screen from the right side to the left side. In order

S1200│

to switch to the main screen, slide Phone screen

from the left side to the right side.

My Favorite

In order to switch to My Favorite screen, slide the

main screen from the left side to the right side. In

order to switch to the main screen, slide My

Favorite screen from the right side to the left side.

In My Favorite, hold down on an icon to launch the

icons of “Delete” and “Swap”:

Tap

to delete the icon you select but you

can not delete “New Setting.” Tap

to swap

the icon in Swap screen.

In Swap screen, the defaulted functions are listed

in the first page and the functions which are

added by you are listed in the second page.

The hidden Functions Menu

In order to launch the hidden Functions Menu,

press Confirm Key on the main screen, or slide

the screen from the upper side to the downside. In

order to close the hidden Functions Menu,

re-press Confirm Key on the main screen, or slide

the screen from the downside to the upper side.

You can select Settings and Programs in that

menu.

S1200│

Smart Zone

You can slide the main screen to the other screen.

Tap this icon to show the map of the whole

interface. The black dot indicates where you are.

Tap this icon to move to the main screen. The

direction of the arrow always indicates where the

main screen is.

Windows Media

In order to switch to Windows Media screen, slide

the main screen from the upper-left corner to the

lower-right corner.

Programs

In order to switch to Programs screen, slide the

main screen from the upper side to the downside.

Photo Viewer

In order to switch to Photo Viewer screen, slide

the main screen from the upper-right corner to the

lower-left corner.

My Favorite

In order to switch to My Favorite screen, slide the

main screen from the left side to the right side.

Phone

In order to switch to Phone screen, slide the main

screen from the right side to the left side.

Widget

In order to switch to Widget screen, slide the main

screen from the lower-left corner to the

upper-right corner.

Settings

In order to switch to Settings screen, slide the

main screen from the downside to the upper side.

NF Browser

In order to switch to NF Browser screen, slide the

main screen from the lower-right corner to the

upper-left corner.

S1200│

Smart Touch

Shortcut Bar

Smart Touch Home

When you activate Smart Touch, you can tap

Today icon

to switch to Today.

No. Items Descriptions

Operator/

Signal

Display the name of your

operator system and the

signal.

2 Battery

Display the status of the

battery.

3 Call History

You can check the

records of your phone

calls.

4 Message

You can send and check

messages.

5 E-mail

You can send and check

Outlook E-mail.

Indicator

Bar

Display icons of

notifications and the

status of the system.

Lock/

Unlock

Tap it to lock or unlock

your device.

8 Time/Date Display time and date.

9 Wallpaper

You can slide the screen

(right to left/left to right)

to show the pure

wallpaper, clock,

calendar, and Smart

Album.

Shortcut

Bar

You can slide the

shortcut bar (right to

left/left to right) to show

different functions.

S1200│

Indicator Bar

It displays icons of notifications and the status of

the system.

Icons Descriptions

Sound Off

Vibrate On

Headset Plug in.

Wallpaper

It contains the pure wallpaper, clock, calendar,

and Smart Album. Slide the screen (right to left/left

to right) to switch the four different contents, which

can move in circles.

Clock Calendar Smart Album

Pure Wallpaper

Smart Album

Smart Album is a picture-viewing application.

You can activate it to view the pictures in the

phone and in Micro SD card. Smart Album also

has the function of slide show.

S1200│

Icons Descriptions

Slide show

Next and Previous photos

Activate Photo Viewer

Device Lock/Unlock

1. Lock the device: Tap the Unlock icon

lock your device. The device will not respond

to any actions on the screen, nor react to any

input on the keypad, when it is locked.

2. Unlock the device: Tap Unlock on the lower-left

corner of the screen. Then tap Unlock button,

and the device is unlocked.

Shortcut Bar

The shortcut bar shows the items which are used

frequently. You can add or delete items on the

shortcut bar. See “Add the Items to Shortcut Bar”

and “Delete the Items which are on Shortcut Bar

in Shortcut Manager”.

Tap the Add icon

to review all items in

Shortcut Manager, and then, tap the icon

return to Smart Touch Home.

Return

Add the Items to Shortcut Bar

The shortcut bar contains four items at least. You

tap the Add icon

to review all items in

Shortcut Manager, and then, you can add the

desired items on the shortcut bar; Follow the

steps below:

1. Select the item you want.

2. Hold, and drag the item to the Add icon

S1200│

Delete the Items which are on Shortcut Bar in

Shortcut Manager

1. Tap the dark item which is added on the

shortcut bar already.

2. Hold, and drag it to the Turn-Round icon

Delete the items on Shortcut Bar

1. Select the item you want.

2. Hold, and drag it to the Delete icon

To change positions of items on Shortcut Bar

Hold, and drag the selected item to the wanted

position.

Contacts

1. Slide the right or left side of the screen from

the downside to the upper side to launch

Contacts Menu.

S1200│

2. Slide the right or left side of the screen to

select a set of contacts, and then, select one of

contacts. Besides, you can select the contact

by your contacts’ initial letters on the bar

located at the bottom of the screen.

3. Tap the Return icon to go back to

Smart Touch Home.

If this document is modified, please download the

latest version on GSmart’s official website.

GIGA-BYTE COMMUNICATIONS INC.

B2, No. 207, Sec. 3, Beixin Road,

Xindian, Taipei, 231, Taiwan

+886-2-89132220

www.gigabytecm.com

S1200│

Gigabyte GSmart S1200 User manual

Brand: Gigabyte

Model: GSmart S1200

Type: User manual

This manual is also suitable for

GSmart S1200 WM6.5

Download PDF

report

Gigabyte GSmart S1200 User manual

This manual is also suitable for

Gigabyte GSmart S1200 User manual

Related papers

Other documents