Panduit CJ5E88TBU Installation guide

Category
Wire connectors
Type
Installation guide

This manual is also suitable for

Panduit CJ5E88TBU is a Giga-TX Jack Module designed for high-performance network connectivity. It supports both T568A and T568B wiring schemes, allowing for versatile installation and compatibility with various network setups. The module is capable of terminating PVC or Plenum rated 22-24 AWG solid or stranded IWC cable with a maximum insulated conductor outside diameter of 0.048 inches (1.2 mm). With a minimum of 10 re-termination cycles, it offers reliable and long-lasting connectivity solutions for your networking needs.

Panduit CJ5E88TBU is a Giga-TX Jack Module designed for high-performance network connectivity. It supports both T568A and T568B wiring schemes, allowing for versatile installation and compatibility with various network setups. The module is capable of terminating PVC or Plenum rated 22-24 AWG solid or stranded IWC cable with a maximum insulated conductor outside diameter of 0.048 inches (1.2 mm). With a minimum of 10 re-termination cycles, it offers reliable and long-lasting connectivity solutions for your networking needs.

For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 1 of 2
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2010
PN120J
1"
(25.4mm)
1
TX5e Giga-TX Jack Modules
Part Numbers: CJ588T**, CJ5E88T**, CJD5E88T**
2
T568A
GREEN
1.
ORANGE
WHITE/GREEN
WHITE/ORANGE
T568B
ORANGE
2.
GREEN
WHITE/ORANGE
WHITE/GREEN
BLUE
3.
BLUE
WHITE/BLUE
WHITE/BLUE
BROWN
4.
BROWN
WHITE/BROWN
WHITE/BROWN
1.
2.
3.
4.
1234
3
2
3
1
4
4
T568A
BROWN
1.
BROWN
T568B
WHITE/BROWN
2.
WHITE/BROWN
WHITE/GREEN
3.
WHITE/ORANGE
GREEN
4.
ORANGE
1.
2.
3.
4.
8
6
5
7
T568A
ORANGE
5.
GREEN
T568B
WHITE/ORANGE
6.
WHITE/GREEN
WHITE/BLUE
7.
WHITE/BLUE
BLUE
8.
BLUE
5.
6.
7.
8.
5
9
10
6
T568A
ORANGE
9.
T568B
WHITE/BLUE
10.
GREEN
9.
WHITE/BLUE
10.
7
CWST
** Denotes color.
8
CGJT
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2010
PN120J
E-mail:
Fax:
(708) 444-6993
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
Page 2 of 2
www.panduit.com
8
7
6
5
4
3
2
1
7 8
4 6
5 3
2 1
Brown
White/Brown
Orange
White/Blue
Blue
White/Orange
Green
White/Green
BOTTOM
TOP
8
7
6
5
4
3
2
1
Brown
White/Brown
Green
White/Blue
Blue
White/Green
Orange
White/Orange
BOTTOM
TOP
7 8
4 6
5 3
2 1
T568A
Wiring Sequences
T568B
18
Pin #’s
2
TERMINATION CAP REMOVAL
1
3
Notes:
1. For specified performance, follow ANSI/NECA/BICSI-568-2006 installation guidelines.
2. Jack Modules can terminate PVC or Plenum rated 22-24 AWG solid or stranded IWC cable with 0.048 inch (1.2 mm)
maximum insulated conductor outside diameter.
3. Jack Modules may be re-terminated a minimum of 10 times.
4. For technical and performance information, consult Panduit Technical Support.
As with all Wiring Accessories, the following statements apply:
1. Never install communications wiring during a lightning storm.
2. Never install communications wiring in wet locations unless the jack is specifically designed for use in wet locations.
3. Never touch uninsulated communications wiring or terminals unless the communication line has been disconnected
at the network interface.
4. Use caution when installing or modifying communication wiring.
54
1 / 1

Panduit CJ5E88TBU Installation guide

Category
Wire connectors
Type
Installation guide
This manual is also suitable for

Panduit CJ5E88TBU is a Giga-TX Jack Module designed for high-performance network connectivity. It supports both T568A and T568B wiring schemes, allowing for versatile installation and compatibility with various network setups. The module is capable of terminating PVC or Plenum rated 22-24 AWG solid or stranded IWC cable with a maximum insulated conductor outside diameter of 0.048 inches (1.2 mm). With a minimum of 10 re-termination cycles, it offers reliable and long-lasting connectivity solutions for your networking needs.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Ask the document