Page is loading ...
INSTALLATION INSTRUCTIONS NK410B
© Panduit Corp. 2007
For Technical Support: www.panduit.com/resources/install_maintain.asp
NETKEY
NETWORK COMPONENTS
CONTRACTOR GRADE
Page 1 of 2
NETKEY Category 6 and 5e Patch Panels
Part Numbers: NK5EPPG24Y, NK5EPPG48Y, NK6PPG24Y, NK6PPG48Y
1
CWST
Trim pair separator and/or
filler if present.
2
T568AT568B
4
PDT110
Tool
(T568B shown)
Option 1 (T568B shown) Option 2
T568 BA BA
T568 BA BA
3
Do not untwist
more then 1/8"
from the IDC
tower
NK5EPPG24Y
Front
Back
NK6PPG24Y
NK5EPPG48Y
NK6PPG48Y
5
T568 BA BA
(T568B shown)
6
T568 BA BA
(T568B shown)
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
www.panduit.com
INSTALLATION INSTRUCTIONS NK410B
E-mail:
Fax:
866-449-1702
Page 2 of 2
WHITE/ORANGE
4
5
3
6
1
2
7
8
BLUE
T1
R1
T3
R3
T2
R2
T4
R4
WHITE/BLUE
WHITE/GREEN
GREEN
ORANGE
WHITE/BROWN
BROWN
4BLUE
5
1
2
3
6
7
8
T1
R1
T2
R2
T3
R3
T4
R4
WHITE/BLUE
WHITE/GREEN
GREEN
WHITE/ORANGE
ORANGE
WHITE/BROWN
BROWN
COLOR-CODED WIRE POSITIONS
18
Pin outs
Pin
outs
T568A
Pin
outs
T568B
Notes:
1. N
ETKEY Category 6 and 5e Patch Panels can terminate most 22-26 AWG
solid or stranded wire with a .050" (1.27mm) max. o.d., either PVC or
Plenum rated.
2. Never install wire into a slot previously used for a larger gauge wire.
3. Never install communications wiring during a lightning storm.
4. Never install communications wiring in wet locations unless the module is
specifically designed for use in wet locations.
5. Never touch uninsulated communications wiring or terminals unless the
communication line has been disconnected at the network interface.
6. Use caution when installing or modifying communication wiring.
7
8
Recommended cable routing for straight panel terminated ports.
Cable Management
RECOMMENDED CABLE ROUTING
/
