Panasonic Network Card 2SA2084 boasts impressive capabilities for general amplification tasks. With a collector-emitter voltage of -300V and a collector current of -70mA, it can handle various amplification needs. Its compact Mini3-G1 package allows for space-saving designs and automatic insertion through tape packing, making it ideal for miniaturized equipment. The device's high collector-emitter voltage rating of -300V ensures safe operation in high-voltage circuits.
Panasonic Network Card 2SA2084 boasts impressive capabilities for general amplification tasks. With a collector-emitter voltage of -300V and a collector current of -70mA, it can handle various amplification needs. Its compact Mini3-G1 package allows for space-saving designs and automatic insertion through tape packing, making it ideal for miniaturized equipment. The device's high collector-emitter voltage rating of -300V ensures safe operation in high-voltage circuits.
Transistors
1
Publication date: January 2003 SJC00286AED
2SA2084
Silicon PNP epitaxial planar type
For general amplification
■ Features
• High collector-emitter voltage (Base open) V
CEO
• Mini type package, allowing downsizing of the equipment and
automatic insertion through the tape packing
■ Absolute Maximum Ratings T
a
= 25°C
Unit: mm
Parameter Symbol Conditions Min Typ Max Unit
Collector-emitter voltage (Base open) V
CEO
I
C
= −100 µA, I
B
= 0 −300 V
Emitter-base voltage (Collector open) V
EBO
I
E
= −1 µA, , I
C
= 0 −5V
Forward current transfer ratio
*
h
FE
V
CE
= −10 V, I
C
= −5 mA 30 150
Collector-emitter saturation voltage V
CE(sat)
I
C
= −10 mA, I
B
= −1 mA − 0.6 V
Collector output capacitance C
ob
V
CB
= −10 V, I
E
= 0, f = 1 MHz 7 pF
(Common base, input open circuited)
Transition frequency f
T
V
CB
= −10 V, I
E
= 10 mA, f = 200 MHz 50 MHz
Marking Symbol: 7N
0.40
+0.10
–0.05
(0.65)
1.50
+0.25
–0.05
2.8
+0.2
–0.3
2
1
3
(0.95) (0.95)
1.9
±0.1
2.90
+0.20
–0.05
0.16
+0.10
–0.06
0.4±0.2
5˚
10˚
0 to 0.1
1.1
+0.2
–0.1
1.1
+0.3
–0.1
Parameter Symbol Rating Unit
Collector-base voltage (Emitter open) V
CBO
−300 V
Collector-emitter voltage (Base open) V
CEO
−300 V
Emitter-base voltage (Collector open) V
EBO
−5V
Collector current I
C
−70 mA
Peak collector current I
CP
−100 mA
Collector power dissipation P
C
200 mW
Junction temperature T
j
150 °C
Storage temperature T
stg
−55 to +150 °C
1: Base
2: Emitter
3: Collector
EIAJ: SC-59
Mini3-G1 Package
■ Electrical Characteristics T
a
= 25°C ± 3°C
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.
2.
*
: Rank classification
Rank P Q
h
FE
30 to 100 60 to 150
This product complies with the RoHS Directive (EU 2002/95/EC).
2
2SA2084
SJC00286AED
V
CE(sat)
I
C
h
FE
I
C
C
ob
V
CB
P
T
T
a
I
C
V
CE
I
C
V
BE
0
50
100
150
200
250
02040 8060 140120100 160
Ambient temperature T
a
(
°C
)
Collector power dissipation P
C
(
mW
)
0 −12−2 −10−4 −8−6
Collector-emitter voltage V
CE
(V)
Collector current I
C
(mA)
− 0.5 mA
− 0.4 mA
− 0.3 mA
− 0.2 mA
− 0.1 mA
− 0.6 mA
− 0.7 mA
− 0.8 mA
− 0.9 mA
I
B
= −1.0 mA
0
−80
−70
−60
−50
−40
−30
−20
−10
T
a
= 25°C
0 −1.4− 0.4 − 0.6− 0.2 −1.2− 0.8 −1.0
0
−120
−100
−80
−60
−40
−20
V
CE
= −10 V
T
a
= 85°C
−25°C
25°C
Base-emitter voltage V
BE
(
V
)
Collector current I
C
(
mA
)
0 −10 −20 −30 −40
1
100
10
f = 1 MHz
T
a
= 25°C
Collector-base voltage V
CB
(V)
Collector output capacitance
(Common base, input open circuited)
C
ob
(pF)
−1 −10 −100 −1
000
0
120
100
80
60
40
20
V
CE
= −10 V
T
a
= 85°C
25°C
−25°C
Forward current transfer ratio h
FE
Collector current I
C
(mA)
− 0.01
− 0.1
−1
−1 −100−10
I
C
/ I
B
= 10
− 0.1
T
a
= 85°C
25°C
−25°C
Collector-emitter saturation voltage V
CE(sat)
(V)
Collector current I
C
(mA)
This product complies with the RoHS Directive (EU 2002/95/EC).
Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1)If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2)The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other
company which may arise as a result of the use of technical information described in this book.
(3)The products described in this book are intended to be used for standard applications or general electronic equipment (such as office
equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
– Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-
ucts may directly jeopardize life or harm the human body.
– Any applications other than the standard applications intended.
(4)The products and product specifications described in this book are subject to change without notice for modification and/or im-
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product
Standards in advance to make sure that the latest specifications satisfy your requirements.
(5)When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6)Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7)This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita
Electric Industrial Co., Ltd.
-
1
-
2
-
3
Panasonic 2SA2084 User manual
- Type
- User manual
- This manual is also suitable for
Panasonic Network Card 2SA2084 boasts impressive capabilities for general amplification tasks. With a collector-emitter voltage of -300V and a collector current of -70mA, it can handle various amplification needs. Its compact Mini3-G1 package allows for space-saving designs and automatic insertion through tape packing, making it ideal for miniaturized equipment. The device's high collector-emitter voltage rating of -300V ensures safe operation in high-voltage circuits.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Panasonic 2SC5654 User manual
-
-
-
-
-
-
-
-
-