Sanus SAN10 Instructions Manual

Type
Instructions Manual
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 USA • accents.sanus.com
Customer Service: 800-359-5520 • 651-484-7988 • [email protected]
©2009 Milestone AV Technologies, a Duchossois Group Company. All rights reserved. Sanus is a division of Milestone.
All other brand names or marks are used for identifi cation purposes and are trademarks of their respective owners.
SAN10
(6904-100134 <01>)
Thank you for choosing the Sanus Accents SAN10. The SAN10 is designed to mount VESA 75x75, 100x100 and 200x100
LCD televisions weighing up to 50 pounds onto a vertical wall. It also allows up to ±15° of tilt.
Do not use this product for any purpose not explicitly speci ed by Sanus Systems. Improper assembly may cause
property damage or personal injury. If you do not understand these directions, or have doubts about the safety
of the assembly, contact Customer Service or call a quali ed contractor. Sanus Systems is not responsible for
damage or injury caused by incorrect assembly or use.
CAUTION
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
This product is designed for use in wood stud walls only! The wall must be capable of supporting up to  ve times
the weight of the monitor and mount combined. If you have any doubts about the ability of the wall to support
the monitor, contact Customer Service, or a quali ed contractor.
CAUTION
6904-100134 <01>
Supplied Parts and Hardware
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the item
to your dealer; contact Customer Service. Never use damaged parts!
This product contains small items that could be a choking hazard if swallowed. Keep these items away
from young children!
WARNING
3/16 in.
[01] x 1
[02] x 2
[06] x 4
[07] x 1
[03] x 2
M4x12mm
[04] x 4
[05] x 4
M6
OPT
Hardware and procedures for multiple mounting configurations are included. When you see this symbol,
choose the correct configuration to suit your needs. Not all hardware included will be used.
6904-100134 <01>
1
[02]
[01]
1/4”
(6.35mm)
[07]
63.5mm
(2.5 in)
2x
Wood Stud Mounting
3/16 in.
6904-100134 <01>
2
100mm
(3.5”)
100mm
(3.5”)
200mm
(7.5”)
200mm
(7.5”)
OPT
[05]
[04]
[03]
Determine Hole Pattern
6904-100134 <01>
3
[06]
[01]
Attach Mount to Monitor
6904-100134 <01>
4
[01]
[02]
Attach TV to Wall Plate
6904-100134 <01>
2x
[07]
5
Tighten Bolts
6904-100134 <01>
Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim
that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product.
The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or implied, regarding
the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Sanus SAN10 Instructions Manual

Type
Instructions Manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI