2. JasonL
  3. BSFC1236PT

JasonL BSFC1236PT, BSFW1236PT Operating instructions

  • Hello, I'm an AI assistant. I have reviewed the provided installation guide for the San Fran System Boardroom Table, specifically the 3600mm x 1200mm model. This guide details the assembly process, including the use of wood screws to attach to the desk top and the various components and hardware involved. I am ready to answer your questions about the table and its installation.
  • What tools are required for the installation?
    Are there pre-drilled holes or nut inserts provided?
    What type of screws are used to attach the table tops?
INSTALLATION GUIDE
San Fran System
Boardroom Table
Size: 3600mm x 1200mm
Special Note: No pre-drilled holes or nut inserts are provided.
Wood screws will be required to be drilled directly into underside of desk top.
Page 1 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Tools Required: Power screwdriver.
Leg x4
Adjustable Foot x4
Leg Cable Cover x4
Rail Lengths x2 (490mm)
Rail Lengths x4 (720mm)
Rail Widths x2 (1150mm)
Intermediate Leg x2 (490mm)
2 Way Connector x4
2 Way Connector Cap x4
3 Way Connector x4
3 Way Connector Cap x4
Rail Space Bracket x4
Slot Nut x6
Table Top x3 (1200mm x 1200mm)
Support Connector x6
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
M8x20mm Dome Head x24
M8x12mm Dome Head x2
M8x20mm Cap Head x8
M5x20mm Self Tapping x28
16
17
18
19
COMPONENTS
SCREWS
INSTALLATION GUIDE
San Fran System
Boardroom Table
Size: 3600mm x 1200mm
Page 2 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
14 11 15
17
18
6
10
5
5
7
3
1
2
8
9
12
5
54
17
12
16
INSTALLATION GUIDE
San Fran System
Boardroom Table
Size: 3600mm x 1200mm
01 02
04
Slide the 2 way connectors over each leg, and securely lock into place
using M8x20mm cap head bolts. Slide 3 way connectors into intermediate
leg & secure into place using M8x20mm cap head bolts.
Loosely connect the longer M8x20mm dome head bolt and slot nut through the
rail spacer bracket. Slide onto required rails and fully tighten in place.
Securely connect legs to rails lengths using the shorter M8x20mm dome
head bolts.
03
Loosely connect the shorter M8x12mm dome head bolt and slot nut through the
metal rail spacer bracket. Slide onto required rails and fully tighten in place.
Page 3 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
05
Securely connect legs to rails widths using the shorter M8x12mm dome head
bolts.
Ensure the work surfaces are centered over the frame. Fully tighten all M5x20mm
self tapping screws through each leg rail spacer and support connector bracket
into the work surfaces.
Cancel any power box cable using the magnetic leg cable covers.
INSTALLATION GUIDE
San Fran System
Boardroom Table
Size: 3600mm x 1200mm
Page 4 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
06
07
/