CAME PS ONE Installation guide

FA00260-EN

English

EN

INSTALLATION MANUAL

PS

PAY-TO-PARK

CONTROL SYSTEM

p.

2

- Manual code:

FA00260-EN

FA00260-EN v.

1

- 03/2017 - © Came S.p.A. - The manual's contents may be edited at any time without notice.

SUMMARY

1. System diagram ........................................................................................................................................ 3

2. Description ................................................................................................................................................ 4

3. Technical specifications ............................................................................................................................ 5

4. Wiring diagram .......................................................................................................................................... 7

5. Dimensions (mm) ...................................................................................................................................... 8

6. Example of system layout with side-by-side entrance and exit lanes .....................................................10

7. Entrance unit / exit unit card and connections - description ...................................................................12

8. Automatic pay station card - description .................................................................................................14

9. Automatic pay station card - installation .................................................................................................18

10. Entrance unit / exit unit - installation ..................................................................................................... 24

11. Entrance unit / exit unit - electrical connections ................................................................................... 25

12. Manned pay station - installation............................................................................................................ 31

p.

3

- Manual code:

FA00260-EN

FA00260-EN v.

1

- 03/2017 - © Came S.p.A. - The manual's contents may be edited at any time without notice.

Pay-to-park system diagram

Magnetic

loop

Free spaces

display

Automatic

pay station

Manned pay

station

OCR

video

camera

OCR

video

camera

Barrier

Entrance unit

Exit unit

The PS ONE is designed for the use with devices with "native" Ethernet interface. This system management offers the opportunity

to configure numerous peripherals such as automatic pay stations, entry and exit units, entrances for permit holders, pedestrian

readers and manned pay stations.

Realisation of a pay-to-park system must account for specific features in order to achieve maximum usability and safety of use.

For example:

- consider all spaces and radii of vehicle manoeuvre. The entrance must comprise a space to station the vehicle in a convenient

manner for taking a ticket. We recommend a minimum distance of 2.8 m between the entrance unit and the barrier;

- Provide for pedestrian transit lanes clearly marked by vertical and horizontal signs to prevent accidents and make pedestrian

entrances and exits fast and orderly.

- Always evaluate the morphology of the site (e.g. gradients, areas with poor visibility, moving parts), to avoid collisions, dangerous

manoeuvres or danger to people. If necessary report potential risks with stripes, signs, mirrors, photocells and sensors.

Important: Ethernet connections must be ad hoc, tested and certified 10/100Mbit.

Verify the static IP addresses to be assigned to devices with your network administrator.

Assess the effectiveness of your Internet connection, which is essential for taking advantage of remote services (e.g. remote

assistance, reservations, monitoring, sending and managing alarms)

Caution! Ensure that the protective devices against overcurrent, short circuits and earth faults in primary circuits, are

installed and properly sized upstream of the system considered here.

p.

4

- Manual code:

FA00260-EN

FA00260-EN v.

1

- 03/2017 - © Came S.p.A. - The manual's contents may be edited at any time without notice.

2 Description

Central server This is the core of the system. The server hosts the software for access

control and monitoring (even remotely) and VoIP control unit management

software for the integrated phone system.

Automatic pay station Unit for automatic payment that involves the following main functions:

- Reading and printing of tickets

- TAG RFID proximity card reading

- TFT 15.4 ’ colour monitor also available in high brightness and touch

versions.

- payment receipt

- payment in coins and notes, with ATM card and credit card (optional)

- change in coins (also available with note change option)

- barcode and QR-code reader also from smartphones

Exit unit Exit unit that involves the following main functions:

- Ticket reading

- TAG RFID proximity card reading (ISO format)

- LCD TFT colour 5.7’ monitor

- barcode and QR-code reader also from smartphones (optional)

Entry unit Entrance unit that involves the following main functions:

- ticket printing

- TAG RFID proximity card reading (ISO format)

- LCD TFT colour 5.7’ monitor

- barcode and QR-code reader also from smartphones (optional)

Manned pay station Composed of an industrial computer with touch screen 15’. Depending on

your needs, the computer can be integrated with: manual ticket Barcode

reader / built-in reader, ticket printer and reader, proximity and microchip

ISO format plastic card writer / receipt printer / additional user-side display /

RFID cards reader + writer / cash drawer.

Two-sided "SPACES - FULL" lightbox sign.

Traffic light with red - green ø 200 mm lights.

Spaces display Spaces available signage panel.

Bi-channel magnetic sensor to detect metal masses

Intercom station Units installed within the local ethernet network: can only be intercom, or

upon request, video-intercom.

Vehicle classifier The system allows to automatically classify up to three classes of vehicles.

OCR video camera for reading number plates The system allows you to read and recognise the license plates of incoming

and outbound vehicles.

EYE SYSTEM cameras The system allows to associate hi-res stills of all four sides of incoming and

outbound vehicles.

UHF Long Range Antenna Automatic Identification System, of vehicles authorised access, via RFID UHF

TAG.

p.

5

- Manual code:

FA00260-EN

FA00260-EN v.

1

- 03/2017 - © Came S.p.A. - The manual's contents may be edited at any time without notice.

3 Technical specifications

Automatic pay station

Central server

Power supply

230 V AC 50/60 Hz 3,5 A max - 120 V AC 50/60 Hz 5 A max

230 V AC 50/60 Hz 13 A max - 120 V AC 50/60 Hz 20 A max

(With optional additional heater 001PSAC142)

Absorption at rest (stand-by) 70 VA

Protection rating IP33

Weight 225 kg

Operating temperature -5°C ÷ + 55°C

-40°C ÷ + 55°C (with optional additional heater

001PSAC142)

Storage temperature 0 °C ÷ + 70 °C

Power supply 230 V - 50 Hz - 150 W

Container Micro tower

Microprocessor Dual Core 1.5 GHz AMD Turion II

RAM PC3-10600E DDR 2GB

HDD RAID - 2 x 500GB SATA drivers

Network control Embedded NC107i PCI Express Gigabit Ethernet

Server Adaptor

Dimensions 267 x 260 x 210 mm

Weight 3 kg

Operating temperature 0 °C ÷ + 40 °C

Storage temperature 0 °C ÷ + 70 °C

Entrance unit - Exit unit

Power supply

230 V AC 50/60 Hz 2 A max - 120 V AC 50/60 Hz 3.5 A max

230 V AC 50/60 Hz 5 A max - 120 V AC 50/60 Hz 8 A max

(With optional additional heater 001PSAC143)

Absorption at rest (stand-by) 50 VA

Protection rating

IP54

Weight 54 kg

Operating temperature -10°C ÷ + 55°C

-40°C ÷ + 55°C (with optional additional heater

001PSAC143)

Storage temperature 0 °C ÷ + 70 °C

The specified characteristics are indicative. They may be changed without prior notice.

p.

6

- Manual code:

FA00260-EN

FA00260-EN v.

1

- 03/2017 - © Came S.p.A. - The manual's contents may be edited at any time without notice.

Manned pay station

Desktop reader/printer

Power supply External 12 V / 24 V - 270 W (with supplied adapter)

Container Integrated system with ABS plastic adjustable monitor

Display 15 ' TFT LCD panel, 1024x768 w/ resistive touch

screen

Microprocessor Intel E5300 Pentium Dual Core, 2.60 GHz

RAM DDR2 512 MB

HDD 500 GB

Dimensions 382 x 356 x 388 mm

Weight 5 kg

Operating temperature 0 °C ÷ + 40 °C

Storage temperature 0 °C ÷ + 70 °C

Power supply 230 V AC 50/60 Hz 1,8 A max - 120 V AC 50/60 Hz 3,6

A max

Power draw (stand-by) 20 V A at 230 V AC / 25 V A at 120 V AC

Operating temperature 0°C ÷ +50°C

Protection rating IP20

Environmental humidity 30% ÷ 80%

Weight 2.8 kg

Overall dimensions 425x220x255 mm

p.

7

- Manual code:

FA00260-EN

FA00260-EN v.

1

- 03/2017 - © Came S.p.A. - The manual's contents may be edited at any time without notice.

Desktop printer

ETHERNET

4 Wiring diagram

Barrier or other

operator

Barrier or other

operator

VEHICLE CROSSING

MAGNETIC loop

VEHICLE CROSSING

MAGNETIC loop

VEHICLE DETECTION

MAGNETIC loop

VEHICLE DETECTION

MAGNETIC loop

Entrance

unit

Automatic

pay station

GSM router.

I / O Interface

Central server Intercom station

Manned pay

station

ATM reader

Receipt printer

Exit

unit

OCR video

camera

EYE SYSTEM shot

cams

Spaces display

Cabled x 1.5 mm² for 230 V a.c.

Cables x 0.5 mm²

Cabled x 1.5 mm² for 230 V a.c.

To the two-channel sensor

Long Range

RFID Reader

Barcode

ticket reader

Classifier

For grid connections strictly follow the IEEE standard ISO / OSI 802.3 or IEEE 802.11

Cables x 0.5 mm²





273

392 320

1190

273

2104

392 320

82

273

122

5512855

283

061

PSICD01

PSOCD01

PSI1S

PSO1S

p.

8

- Manual code:

FA00260-EN

FA00260-EN v.

1

- 03/2017 - © Came S.p.A. - The manual's contents may be edited at any time without notice.

5 Overall dimensions (mm)

Entrance unit - Exit unit

Anchor base

Front

Please note that the units must be fixed on a base 120 at a minimum depth of 600.

Base and foundation slab

 







 





º

50 mm

≥100 mm

мм

p.

9

- Manual code:

FA00260-EN

FA00260-EN v.

1

- 03/2017 - © Came S.p.A. - The manual's contents may be edited at any time without notice.

Automatic pay station

The automatic pay station must be installed in a sheltered area protected from rain, snow, dust, or other elements.

If necessary, install elements such as canopies and side panels to protect the pay station against atmospheric and environmental

agents.

The automatic pay station has been dimensioned taking into account an underlying base of about 50 mm high.

Ɗ

 





PLQ

Ɗ

Ɗ

Ɗ

Ɔ

1

2

3

6

1

9

3

9

2

5

4

7

8

7

(мин.)

p.

10

10 - Manual code:

FA00260-EN

FA00260-EN v.

1

- 03/2017 - © Came S.p.A. - The manual's contents may be edited at any time without notice.

6 Example of system layout with side-by-side entrance and exit lanes

Note: the example shows the minimum dimensions (in mm) between the components of the system.

These measures are to be met for correct operation.

1. OCR video camera

2. Vehicle detection loop

3. Vehicle crossing loop

4. Exit unit

5. Classifier

6. Entrance unit

7. Barrier

8. Pit

9. EYE SYSTEM shot cam

Description of the components

ENTRY

EXIT

2 3 4

6

5

19

7

18

17

8

9

11

12

10131415

1

16

20

21

AB

p.

11

11 - Manual code:

FA00260-EN

FA00260-EN v.

1

- 03/2017 - © Came S.p.A. - The manual's contents may be edited at any time without notice.

7 Entrance unit / exit unit card and connections - description

1. Traffic light fuse F1=1A-T

2. Traffic light connection terminal

3. Fan and heater connection terminal

4. Barrier connection terminal

5. LED A - Relay A active

6. LED B - Relay B active

7. R700 optional card connection terminal

8. Paper sensor connection terminal

9. Door switch connection terminal

10. CPU power supply terminal

11. Operating LED

12. Input status indicator LED

13. Input connection terminals

14. Printer power supply terminal

15. Vdc power supply inputs

16. Fan and heater fuses F2=3.15A-T

17. TSP-00 optional connection

18. Optional RSE card connection terminal

19. RS485 optional connection

20. Optional connection OCR camera

21. Optional relay connection

+-

p.

12

12 - Manual code:

FA00260-EN

FA00260-EN v.

1

- 03/2017 - © Came S.p.A. - The manual's contents may be edited at any time without notice.

Entrance - exit unit LED index input

INPUT CONDITION OF LED ON: N.B.

IN1 Vehicle presence detection of loop 1

IN2 Vehicle on Safety loop located under the barrier

IN3 Vehicle presence detection of loop 2 optional

IN4 Vehicle Classifier Axle Detection Activation optional

IN5 Vehicle Classification Photocell Free optional

IN6 Barrier open

Power supply input

2D Reader USB

connection

Compact

Flash Memory Slot

USB camera

connection

Ethernet Network

Connection

RS485

connection I/O

boards

Printer

connection

Audio interface

connection

Entrance - exit unit CPU connections

1

8

9

10

2

16

18

17

3

13

14

41112

5

6

15

7

p.

13

13 - Manual code:

FA00260-EN

FA00260-EN v.

1

- 03/2017 - © Came S.p.A. - The manual's contents may be edited at any time without notice.

1. Ticket key

2. LCD Backlight

3. User keys

4. Ticket slit LED

5. Rfid Reader

6. Brightness sensor

7. Power supply and data input

8. Loud speaker

9. Audio input

10. Microphone

11. Extraction fan

12. Reserved

13. Reserved

14. Accessory power supply

15. Jumper closed

16. LH LED strip

17. RH LED strip

18. Upper LED strip

Entrance - exit unit "Connections Board"

7

8

14

11

1 2 3 4 5 6

10

91213

16

15

17

p.

14

14 - Manual code:

FA00260-EN

FA00260-EN v.

1

- 03/2017 - © Came S.p.A. - The manual's contents may be edited at any time without notice.

8 Automatic pay station card - description

1. VAC power supply input

2. Interior lighting connection terminal

3. Fan and heater connection terminal

4. Remote alarm output terminal

5. Reset relay terminal

6. Power supply detector terminal

7. Paper sensor photocell

8. Pay station top element LED strip connection

9. Data connection

10. Input status indicator LED

11. Operating LED

12. Input connection terminals

13. Vdc power supply inputs

14. Seismic sensor connection

15. Fan and heater fuses F2=3.15A-T

16. Interior lighting fuse F1=1A-T

17. Internal siren connection

+-

p.

15

15 - Manual code:

FA00260-EN

FA00260-EN v.

1

INPUT CONDITION OF LED ON: N.B.

IN1 Upper door closed (maintenance compartment)

IN2 Middle door closed (cash compartment)

IN3 Collection Drawer Fitted

IN4 Coins Drawer Fitted

IN5 Coins Drawer Engaged

IN6 Vac power present

LED index input on automatic pay station card

USB camera

connection

Reader-Printer RS232

connection

Ethernet Network

Connection

LCD Monitor LVDS

Reserved

Ethernet Connection

RS485 connection

I/O boards

2D Reader USB

connection

USB optionals

connection Power supply

input

USB audio interface connection

Automatic Pay Station CPU connections

6

78910

16 17 18 191514

4

13

12

11

3

2

1

5

p.

16

16 - Manual code:

FA00260-EN

FA00260-EN v.

1

CCTALK card

Compact

Flash Memory Slot

CCTALK interface

RS232 connection

Receipt Printer RS232

connection

1. Activation key for card self-diagnostics TEST

2. Reserved

3. Reserved

4. CCTALK 6 Channel - connection available

5. CCTALK address selection Dipswitch

6. CCTALK 5 Channel - change return Hopper 1 connection

7. CCTALK 3 Channel - connection available

8. CCTALK 2 Channel - change return Hopper 2 connection

9. CCTALK 1 Channel - change return Hopper 3 connection

10. Power supply input

11. Voltage selection on CN6 and CN8

12. CCTALK 5 Channel - change load Hopper connection

13. RS232 from Computer

14. Reject device connection

15. Change and Receipts drawer LED connection

16. Reserved

17. Reserved

18. CCTALK 6 Channel - Coin reader connection

19. CCTALK 4 Channel - Note reader connection

LED STATUS DESCRIPTION

Green LED RUN (ﬂ ashing ON)

Red LED ERROR (normally OFF)

Blue LED CCTALK RX line (normally OFF)

Yellow

LEDs: CCTALK CHx line (normally OFF)

1

8

9

10

2

16

18

17

3

13

14

41112

5

6

15

7

p.

17

17 - Manual code:

FA00260-EN

FA00260-EN v.

1

Automatic Pay Station Connections Board

1. Coin slot shutter

2. LCD Backlight

3. User keys

4. Ticket slit LED

5. Rfid Reader

6. Brightness sensor

7. Power supply and data input

8. Loud speaker

9. Audio input

10. Microphone

11. Coin slit LED

12. Reserved

13. Reserved

14. Accessories power supply

15. Jumper open

16. Reserved

17. Reserved

18. Reserved

p.

18

18 - Manual code:

FA00260-EN

FA00260-EN v.

1

9 Automatic pay station - installation

Wear protective gloves when installing the system.

Enclose the work area and implement all

the requirements on the safe use of moving

mechanical equipment. Risk of swinging

parts

- Apply three steel cables with hooks at the end with a capacity

of at least 250 kg, in the seats on the head of the central element.

- Use a mechanical arm to tension the steel cables and then lift

the central element and bring it above the base.

- Insert the gasket between the two elements then slowly lower

the central element while making sure to centre the holes on the

base until it is supported upright.

- Release the harness.

- Fit and tighten the 10 fixing screws (supplied) of the base to the

central element.

The automatic pay station is supplied in

three elements that require assembly:

• base plate

• central element

• top element

Base

Top element

Central element

Automatic pay station installation

gasket

p.

19

19 - Manual code:

FA00260-EN

FA00260-EN v.

1

- Position the top element above the central one, and then secure the nine

screws supplied.

-Connect the LED connector to the top element on the left

side of the pay station.

- Remove the screw that secures the

printer.

p.

20

20 - Manual code:

FA00260-EN

FA00260-EN v.

1

Power supply and ETHERNET connection

- Ground the cabinet by connecting it to the site ground

connector using cables of at least 4 mm².

- Connect the ground points between the two parts that

make up the cabinet with the supplied cable.

Power from the main electrical panel of the site to provide adequate all-pole disconnect device for

disconnecting line voltage (MCB + RCD). Required characteristics:

• Circuit breaker with breaking current up to 16 A (230 V) or 25 A (120 V);

• RCD with 30 mA sensitivity.

Before connecting the device, disable the external all-pole disconnecting device.

The minimum cross section of the double insulated cable must be based on the characteristics and size of the plant, and in any

event not less than 2.5 mm².

Connect the ground cable to the top element.

Page is loading ...

CAME PS ONE Installation guide

CAME PS ONE Installation guide

Related papers

Other documents