2. SMITH SYSTEM
  3. 03082

SMITH SYSTEM 03082, 03083 Assembly Instructions

  • Hello! I'm your chat assistant and I've reviewed the Installation Instructions for the Interchange Diamond & Mini Diamond Desk. This document details all the steps for assembling your desk, it includes parts lists, and assembly instructions. Ask me anything you would like about the assembly process or the desk components.
  • What are the model numbers covered by these instructions?
    Where can I find assistance for assembly or if I have damaged parts?
    What is the size of the wood screws?
For Assistance in assembling product, missing or damaged parts, or to place an order, please contact
customer service at 800-328-1061.
You may also place your order online at
Form #179964 www.smithsystem.com 06/2018
Interchange Diamond & Mini Diamond Desk
Installation Instructions
Model Numbers
03082
03083 (Mini)
For Assistance in assembling product, missing or damaged parts, or to place an order, please contact
customer service at 800-328-1061.
You may also place your order online at
Form #179964 www.smithsystem.com 06/2018
Components and Hardware
Replacement Hardware Pack:
1. 69761 BLA/ZINC-R
a. (2) 70867 – Connector Bolt ¼-20x23mm
b. (2) 70869 – Connector Nut ¼-20x17mm
c. (14) 70080 - #10x5/8 Truss Head Phillips Head
d. (1) 77813 – Hex Key Allen Wrench 3/16”
Connector Bolt ¼-20 X 23mm
P/N: 70867
QTY: 2
Connector Nut ¼-20 x 17mm
P/N: 70869
QTY: 2
#10 x 5/8” Wood Screw
P/N: 70080
QTY: 14
Hex Key Allen Wrench 3/16”
P/N: 77813
QTY: 1
Diamond Top
QTY: 1
Leg and Center Leg
P/N: 79526 (03082)
P/N: 79522 (03083) QTY: 1 each
For Assistance in assembling product, missing or damaged parts, or to place an order, please contact
customer service at 800-328-1061.
You may also place your order online at
Form #179964 www.smithsystem.com 06/2018
Assembly Instructions
Step 1: Align the center support with the pre-drills on the top.
Step 2: Position the other legs as shown below, aligning them with the pre-drills.
Step 3: Secure the legs together loosely with the connector bolts provided.
Step 4: Fasten the frame assembly to the top using the (14) 5/8” wood screws provided.
Step 5: Tighten the connector bolt using the Allen Key (Hex Key) provided.
Connector Bolt
/