SMITH SYSTEM 179951 Assembly Instructions

Type
Assembly Instructions
CASCADE TEACHER DESK
If you have damaged or missing components please contact customer service.
DOUBLE PEDESTAL MODELS
09/2011www.smithsystem.com
800-328-1061
Form #179951
9/2011
If you have damaged or missing components please contact customer service.
www.smithsystem.com
AND MAKE SURE THE LAMINATE IS FACE DOWN AND THE PRE-DRILLED
HOLES ARE FACING UPWARDS.
LAY THE TOP UPSIDE DOWN, WITH THE CUT OF THE T-MOLD AT THE BACK1.
2. REMOVE BOTH DRAWER PEDS FROM THEIR CARTONS. REMOVE THE DRAWERS
OR TOTES. TURN THEM UPSIDE-DOWN SO YOU CAN ACCESS THE HOLES IN THE
TOP PLATE. ATTACH THE MODESTY PANEL TO THE CABINETS LOOSELY USING THE
SUPPLIED 1/4-20 MACHINE SCREWS.
3. SECURE DRAWER PED ON TO THE WORK SURFACE. ALIGN HOLES ON DRAWER PED
TO PRE-DRILLED HOLES ON THE WORKSURFACE. ONCE THE PEDS ARE ATTACHED
FULLY TIGHTEN THE MACHINE SCREWS HOLDING THE MODESTY PANEL.
A
DETAIL A
SCALE 1 : 5
MODESTY PANEL
CABINET
ATTACH WITH
1/4-20 MACHINE
SCREWS
Form #179551 800-328-1061
If you have damaged or missing components please contact customer service.
4. NOW ATTACH THE CASTERS TO THE PEDS USING THE SUPPLIED SCREWS.
5. PLACE UNIT UPRIGHT AND INSTALL DRAWERS OR TOTES.
9/2011
www.smithsystem.com
800-328-1061
Form #179951
  • Page 1 1
  • Page 2 2
  • Page 3 3

SMITH SYSTEM 179951 Assembly Instructions

Type
Assembly Instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI