SMITH SYSTEM 179745 Assembly Instructions

Brand
SMITH SYSTEM
Model
179745
Type
Assembly Instructions

SMITH SYSTEM 179745 Interchange Activity Table is a versatile piece of furniture that can be used for a variety of purposes in commercial and residential settings. With its sturdy construction and adjustable height, the table is perfect for use as a work surface, dining table, or conference table. The table's top is made of a durable laminate material that is resistant to scratches and stains, making it ideal for use in high-traffic areas. The table's legs are made of steel and are adjustable in height, allowing you to customize the table to fit your specific needs. The table also features a built-in storage shelf that is perfect for storing books, magazines, or other items.

SMITH SYSTEM 179745 Interchange Activity Table is a versatile piece of furniture that can be used for a variety of purposes in commercial and residential settings. With its sturdy construction and adjustable height, the table is perfect for use as a work surface, dining table, or conference table. The table's top is made of a durable laminate material that is resistant to scratches and stains, making it ideal for use in high-traffic areas. The table's legs are made of steel and are adjustable in height, allowing you to customize the table to fit your specific needs. The table also features a built-in storage shelf that is perfect for storing books, magazines, or other items.

For Assistance in assembling product, missing or damaged parts,
or to place an order, please contact customer service at 800-328-1061
You may also place your order online at
www.smithsystem.com
09/2021
Form# 179745
Interchange Activity Table
Assembly Instructions
Models
Rectangle Interchange
Square Interchange
Round Interchange
Contour Interchange
Flower Interchange
Hardware and Components
For Assistance in assembling product, missing or damaged parts,
or to place an order, please contact customer service at 800-328-1061
You may also place your order online at
www.smithsystem.com
Form# 179745 09/2021
MODEL
LEG SET
BRACE
BRACE QTY
TOP SIZE
04100
79804
77506
1
24X36
04101
79804
77508
1
24X48
04102
79804
77509
1
24X60
04103
79804
77510
1
24X72
04104
79804
77511
1
24X90
04105
79805
77506
1
30X36
04106
79805
77508
1
30X48
04107
79805
77509
1
30X60
04108
79805
77510
1
30X72
04109
79805
77511
1
30X90
04110
79806
77506
1
36X36
04111
79806
77508
1
36X48
04112
79806
77509
1
36X60
04113
79806
77510
1
36X72
04114
79806
77511
1
36X90
04115
79807
77507
2
42X42
04116
79807
77509
2
42X60
04117
79807
77510
2
42X72
04118
79807
77511
2
42X90
04119
79808
77508
2
48X48
04121
79808
77509
2
48X60
04122
79808
77510
2
48X72
04123
79808
77511
2
48X90
04124
79805
77505
1
42 DIA.
04125
79805
77506
1
48 DIA.
04126
79806
77508
1
60 DIA.
04129
79508
77508
1
CONTOUR
04132
79806
77508
1
FLOWER
04151
79805
77509
1
30X60 BUTCHER
BLOCK
Replacement Hardware Packs:
1. 67607 – HDWR PK, Inter Act 24, 30, 36
a. (2) 77813 – 3/16” Allen Wrench
b. (4) 70867 - Connector Bolt ¼-20 x
23mm
c. (4) 70869 – Connector Nut ¼-20 x
17mm
d. (26) 70054 - #10x3/4” Wood
Screw
2. 67608 – HDWR PK, Inter Act 42, 48
a. (2) 77813 – 3/16” Allen Wrench
b. (8) 70867 – Connector Bolt ¼-20 x
23mm
c. (8) 70869 – Connector Nut ¼-20 x
17mm
d. (44) 70054 - #10x3/4” Wood
Screw
Leg Set
(QTY: 1 Pair/Box)
Support Channel/Brace
(P/N&QTY: See Table)
Table Top
(QTY: 1)
3/16” Allen Wrench
P/N: 77813
(QTY: 2)
P/N: 70867 – Connector Bolt ¼-20 x 23mm #10x3/4” Wood Screw
P/N: 70869 – Connector Nut ¼-20 x 17mm P/N: 70054
(QTY: See Table) (QTY: See Table)
For Assistance in assembling product, missing or damaged parts,
or to place an order, please contact customer service at 800-328-1061
You may also place your order online at
www.smithsystem.com
09/2021
Form# 179745
Assembly Instructions
Step 1: Place the top on a clean, dry surface laminate side down, so that the predrill holes face up.
Step 2a: Loosely attach the legs to the support brace using (4) connector bolts and (4) connector nuts.
(See Picture #1A)
Step 2b: If your table requires a bigger assembly, attach the legs to the braces using (8) Connector Bolts
and (8) connector Nuts. (See Picture #1B)
Picture #1B
Picture #1A
For Assistance in assembling product, missing or damaged parts,
or to place an order, please contact customer service at 800-328-1061
You may also place your order online at
www.smithsystem.com
09/2021
Form# 179745
Step 3: Align the slots of the Leg Assembly to the pre-drilled holes of the top. Using the ¾” screws
provided, attach the leg assembly to the top. (Tip: Stagger the screws in the beginning. For example,
Fasten one screws on one of the legs, then another screw on the other leg. Continue to stagger the
screws until the assembly is attached to the top using all of the screws.
NOTE: BUTCHER BLOCK TABLES do not have predrilled holes. The top surface of the table will
have a noticeably glossier finish than the underside. Center the preassembled frame to the
underside of the butcher block top and drive the provided wood screws into the top.
Picture #2
Step 4: Tighten the connector bolts and nuts to the channel, attached in Step 2, using both hex keys
provided.
Step 5: Adjust the leg height as needed by loosening the set screw in the leg (use the hex key to loosen).
Tighten the set screws. Hand tighten, do not use power tool, to tighten set screw to ensure screw is
correctly located in the insert hole.
Picture #3
For Assistance in assembling product, missing or damaged parts,
or to place an order, please contact customer service at 800-328-1061
You may also place your order online at
www.smithsystem.com
09/2021
Form# 179745
Step 6: If installing casters, unscrew the glides and oval washers from all legs.
For Assistance in assembling product, missing or damaged parts,
or to place an order, please contact customer service at 800-328-1061
You may also place your order online at
www.smithsystem.com
09/2021
Form# 179745
Step 7: Once the glides and oval washers have been removed, screw in the casters to the bottom of the
leg caps using the provided wrench. Do NOT reuse the oval glides with the casters, as this prevents the
casters from being installed properly.
Step 8: Use the help of at least one other person and turn the table over to an upright position.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

SMITH SYSTEM 179745 Assembly Instructions

Brand
SMITH SYSTEM
Model
179745
Type
Assembly Instructions

SMITH SYSTEM 179745 Interchange Activity Table is a versatile piece of furniture that can be used for a variety of purposes in commercial and residential settings. With its sturdy construction and adjustable height, the table is perfect for use as a work surface, dining table, or conference table. The table's top is made of a durable laminate material that is resistant to scratches and stains, making it ideal for use in high-traffic areas. The table's legs are made of steel and are adjustable in height, allowing you to customize the table to fit your specific needs. The table also features a built-in storage shelf that is perfect for storing books, magazines, or other items.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents