2. AVFI
  3. SH-TP-B

AVFI SH-TP-B Installation guide

  • Hello! I have reviewed the provided installation guide for the SH-TP-B Shelf. I'm ready to assist you with any questions you may have regarding the installation process, the included parts, or the features of the shelf. The document provides step-by-step instructions for mounting the shelf to the TP800/1000 stand, explains how to use the drilling template, and lists all components of the shelf mounting kit.
  • What drill size is required?
    What size of grommet is included?
    What type of screws are used to attach the shelf?
0.75in
13.00in
3.46in 1.61in
SH-TP-B Drilling Template
print on 11x17 (do not scale)
Drill 3/16" or 1/4" x4
Shelf
1.
Remove back off TP800/1000 stand using Allen key (m6 bolts)
2.
Drill out partially drilled Grommet hole using router bit or rotozip.
3.
Place template 24" from bottom of extrusion to top of shelf. level and tape in place.
4.
Drill through template using a 3/16 or 1/4" Drill.
5.
Insert 60mm Grommet included
6.
Attach shelf brackets using 3/16x1.25 bolts,washers and nuts x4
7.
Attach shelf using 3/4" wood screws provided.
8.
place plastic covers over metal brackets.
24.00in
SH-TP-B
SH-TP-B
Included Parts.
1x SH-TP-B shelf
2x Metal L bracket w plastic covers
1x SH-TP-B hardware bag
1x 2 3/8 (60mm) Grommet
0.75in
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
AVFI. ANY REPRODUCTION IN PART OR AS
A WHOLE WITHOUT THE WRITTEN
PERMISSION OF AVFI IS PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
APPLICATION
DRAWN
CHECKED
DESIGNED
DATE: YMD
NAME
TITLE:
SIZE
B
DWG. NO.
REV
SCALE: 1:1
SHEET:1 OF 1
00
ELECTRONIC COPY IS MASTER. DO NOT
USE UNLESS STAMPED AND APPROVED
M.Fischer
M.Fischer
/