Coats Kit 85000675, Air Inflator Operating instructions

Brand: Coats

Model: Kit 85000675, Air Inflator

Type: Operating instructions

Air Inﬂator Mounting Kit 85000675

For use with a Coats 85009939 Air-Check™

Inﬂator or an Excel Brand Air Inﬂator

Hennessy Industries • 1601 J.P. Hennessy Drive, LaVergne, TN 37086-3565 (800) 688-6359 • (615) 641-7533 • (615) 641-5104 FAX • www.ammcoats.com

Shown for Reference

Only, Not Part of Kit

Shown for

Reference Only

Not Part of Kit

217

Coiled inflate

air hose

not shown.

Connect 8113417 1/4-inch

air hose to air inflate unit

securing with hose clamp

8101428 and connect to

proper air source.

Feed 1/4-inch air hose

8113417 and power cord

from air inflate unit thru

center of tube as shown.

COATS

Unit

EXCEL

Unit

Note: The Coats Air-Check™ inﬂator and the Excel

Air Inﬂator are customer supplied parts and ARE

NOT included in this kit.

Ref. Part No. Description

*1 8000378 1/4" Brass St. Fitting

*2 8101428 1/4-inch Hose Clamp

3 8102459 Self Tapping Bolt

4 8106301 1/4" Hex Hd Self Tap Screw, Gr.5

5 8120325 5/16 x 1.00 Serrated Washer Hd. Screw

6 8181183 5/16-18 Nylon Insert Lock Nut Gr.5

*7 8113417 Black Rubber Hose, 1/4 ID x 120"

8 85000199 Arm Stop Trim Strip

9 85000649 Air Inflate Mounting Bracket

10 871100805 HHCS Screw, 1/4-20 x 3/4

11 8181369 .250-20, Nylock Hex Nut

*For use with the Excel brand inflator. These also come stan-

dard with the Coats Air-Check™.

Coats Kit 85000675, Air Inflator Operating instructions

Coats Kit 85000675, Air Inflator Operating instructions

Coats Kit 85000675, Air Inflator Operating instructions

Related papers

Other documents