• Never point any inator toward yourself or others.
• Keep the exterior of the inator dry, clean, and free from oil and grease. Always use a
clean cloth when cleaning. Never use brake uids, gasoline, petroleum based products, or
any strong solvents to clean the unit. Following this rule will reduce the risk of deteriora-
on of the enclosure plasc.
• Do not exceed the pressure rang of any component in the system.
• Protect material lines and air lines from damage or puncture. Keep hose and power cord
away from sharp objects, chemical spills, oil, solvents, and wet oors.
Baery tool use and care
• Recharge only with the charger specied by the manufacturer. A charger that is suitable
for one type of baery pack may create a risk of re when used with another baery
pack.
• Use power tools only with specically designated baery packs. Use of any other baery
packs may create a risk of injury and re.
• When baery pack is not in use, keep it away from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal objects, that can make a connecon from
one terminal to another. Shorng the baery terminals together may cause burns or a
re.
• Under abusive condions, liquid may be ejected from the baery; avoid contact. If contact
accidentally occurs, ush with water. If liquid contacts eyes, addionally seek medical
help. Liquid ejected from the baery may cause irritaon or burns.
SERVICE
• Inator service must be performed only by qualied repair personnel. Service or mainte-
nance performed by unqualied personnel may result in a risk of injury.
• When servicing an inator, use only idencal replacement parts. Follow instrucons in
the Maintenance secon of this manual. Use of unauthorized parts or failure to follow
Maintenance instrucons may create a risk of shock or injury.
SPECIFIC SAFETY RULES
• Know your inator. Read operator’s manual carefully. Learn its applicaons and limita-
ons, as well as the specic potenal hazards related to this tool. Following this rule will
reduce the risk of electric shock, re, or serious injury.
• Risk of bursng. Do not operate inator to result in output pressure greater than marked
maximum pressure of item to be inated. Do not use at pressure greater than 116 PSI.
• To reduce the risk of electric shock, do not expose to rain. Store indoors.
• Inspect unit for cracks, pin holes, or other imperfecons that could cause inator to be-
Safety Instructions