Breezesta Round Bar Table Assembly Instructions

Type
Assembly Instructions
Attach Side Assemblies to Spreaders by placing the
tenon into the mortise (pocket) and attching with
screws (A) as shown.
G
Ver 13.1
Place the table top on the base so that the Aluminum Rails on
the table top fit within the base as shown above. Place Ell
Brackets (D) in the corners, as shown.
Attach table top to base using uncolored screws (B)
through the underside of the Ell Brackets (D), and to
legs using uncolored screws (C) through the side of the
Ell Brackets.
A-3"(28 pcs.)colored
B-7/8"(4pcs.)uncolored
D-Metal Ell Bracket (4 pcs.)
C-1.5"(4pcs.)uncolored
A
BASE SPREADER
SPREADERS
STEP 1
SIDE ASSEMBLIES
STEP 2
TABLE TOP
ALUMINUM RAILS
D
STEP 3
B & C
BREEZESTA tm
Recycled Poly Furniture
48" ROUND BAR TABLE
LIST OF PARTS
Side Assemblies (2)
Spreaders (6)
Base Spreader (1)
Table Top (1)
Colored Screws "A" (28)
Un-Colored Screws "B" (4)
Un-Colored Screws "C" (4)
Metal Ell Bracket "D" (4)
Insert Bit Tool (1)
BH-0909
  • Page 1 1

Breezesta Round Bar Table Assembly Instructions

Type
Assembly Instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI